Content |
The Behringer HA-40R 40W Guitar Combo Amp is a compact and portable guitar amplifier that really packs a punch. Sporting a custom Bugera 10" speaker and revolutionary VTC technology, this amp is capable of delivering colossal tones well beyond what you'd expect of an amp this size.
Choose from clean or overdriven channels and use the responsive 3-band EQ to fine-tune your sound and finish dialling in your dream tones. Perfect for beginner and veteran players alike, the straightforward setup and sheer ease-of-use make this the perfect amp for those that want to plug in and play; the superior sound quality is just a huge bonus!
Specifications
Inputs
- Guitar input: 1/4" TS jack
- Impedance: 220 kΩ unbalanced
- Aux input: 1/8" TRS jack
- Impedance: 24 kΩ unbalanced
Outputs
- Outputs Headphones: 1/8" TRS jack
- Impedance: 32 Ω unbalanced
- Line out: 1/8" TRS jack
- Impedance: 1 kΩ balanced
- Output: 1/4" TS jack
- Min impedance: 4 Ω
Amplifier
- Peak power: 40 W
- Loudspeaker Type: 10" Bugera
- Impedance: 4 Ω
Power Supply
- Power consumption: 80 W
- Fuse:
- 100-120 V , 50/60 Hz: T 500mAL 250 V
- 220-230 V , 50/60 Hz: T 250mAL 250 V
- Mains connection: Standard IEC cable
Physical
- Standard operating temperature: 0° C - 40° C (32° F - 104° F)
- Dimensions (H x W x D): 420 x 425 x 220 mm (16.5 x 16.7 x 8.7")
- Weight: 10 kg (22 lbs)
|
From as clean as you please to as dirty and growly as you want it! We ain't kiddin' neither!
The possibilities are endless with this little guy. This JVM has 2 independent channels with 3 gain stages. A smart footswitch that remembers your settings...great for playing live! There are 2 master volumes that can be recalled by the footswitch as well. The reverb sounds incredible...it really does. Emulated XLR out for recording. You can dial into any sound you desire with this amp. 2 effects loops. You get it all with a Marshall JVM
Marshall JVM 205C Specs:
100W power
All-valve, with 5 x ECC83s, and 4 x EL34s
1x Vintage 12" + 1x Heritage 12" Speaker
2 totally independent, footswitchable channels
Each channel has 3 footswitchable modes (clean,crunch & overdrive)
Footswitchable, studio-quality digital reverb
Independent reverb controls for each channel
2 footswitchable master volumes
2 FX loops, one series, and one parallel
Parallel FX loop is footswitchable on/off
Speaker emulated XLR output
4-way footswitch (with memory) supplied
All switching can be done via MIDI
Made in England
|
- Hand-built 22-Watt guitar combo driven by 2 x EL84 valves
- Way cool vintage look and feel
- Original heavy-duty 12" BUGERA guitar speaker for true vintage sound
- Authentic 2-channel preamp design from the '60s featuring 3 x 12AX7 valves—everything from purring blues to mind-blowing crunch
- Integrated high-class reverb with dedicated Reverb control
- Vintage Equalizer section with dedicated Bass, Mid, Treble and Presence controls
- Normal and Bright inputs for ultimate sound character to perfectly match your guitar
- Multi-gain stage Lead channel with Pre, Post gain and Master controls
- Amazing Mode switch to select between Triode or Pentode operation
- Impedance connectors (4, 8 and 16 Ohms) to match virtually any external speaker cabinet
- High-quality components and exceptionally rugged construction ensure long life
|
Vox DA15 15W Guitar Amplifier
Introducing the affordable, portable DA15 Digital Amp from VOX. Don't let the small size fool you. This rugged little beast boasts some killer bells and whistles, such as 11 distinctive sound styles ranging from clean to high gain, 11 great sounding, digital effects, a ???knob-based?? control panel that's really easy to use plus a whole lot more.
Specifications:
Number of Styles: 11
Number of Effects: 11 plus noise reduction
Signal Processing: 24-bit (both A/D and D/A conversion), 44.1 kHz sampling frequency
Input/Output Jacks: INPUT, FOOT SW, LINE/PHONE
Power Amp Output: Maximum 15W RMS @ 8 ohms
Speaker: 1 x 8 inch, VOX original (8 ohm)
Power Supply: Local Mains
Dimensions: 16.81?? x 8.90?? x 15.24?? (W x D x H)
Weight: 22.05 lbs
Options: VFS2 Dual Foot Switch
|
The 2266C 50-watt 2X12 combo is an all-valve single channel amplifier with a choice of 2 "dynamic ranges" selectable by a footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the '70s.
Specification
Output (RMS): 50 watts
Speakers: 2 x G12C
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 2 x KT66
Footswitch (Supplied): PEDL-00041
Dimensions (mm): 690 x 5700 x 270
Weight (kg): 30
|
From as clean as you please to as dirty and growly as you want it! We ain't kiddin' neither!
The possibilities are endless with this little guy. This JVM has 2 independent channels with 3 gain stages. A smart footswitch that remembers your settings...great for playing live! There are 2 master volumes that can be recalled by the footswitch as well. The reverb sounds incredible...it really does. Emulated XLR out for recording. You can dial into any sound you desire with this amp. 2 effects loops. You get it all with a Marshall JVM
Marshall JVM 205C Specs:
50W power
All-valve, with 5 x ECC83s, and 2 x EL34s
1x Vintage 12" + 1x Heritage 12" Speaker
2 totally independent, footswitchable channels
Each channel has 3 footswitchable modes
Footswitchable, studio-quality digital reverb
Independent reverb controls for each channel
2 footswitchable master volumes
2 FX loops, one series, and one parallel
Parallel FX loop is footswitchable on/off
Speaker emulated XLR output
4-way footswitch (with memory) supplied
All switching can be done via MIDI
Made in England
|
Reviews
There are no reviews yet.