| Content | Your Voice to Hi Tech Interface
The incredible MIC 2 USB is the very essence of simplicity. Connect the balanced XLR connector to your dynamic microphone and run the USB cable to your computer. It just doesn’t get any easier than this!
In the Zone
MIC 2 USB’s long cable (16.5' / 5 m) provides the ultimate in convenience for tracking in the studio – putting your best performance squarely in the zone!
Plug and Play
MIC 2 USB interfaces seamlessly with Windows* PC and Mac* operating systems and is ideal for use with low latency ASIO* drivers (such as ASIO4ALL*) for PC and the built-in Core Audio drivers for Mac. Step into the virtual world of recording software, amplifier and effect plug-ins and create stunning soundscapes – that would otherwise require the keys to one the world’s top recording studios. MIC 2 USB works with virtually all popular 32-bit compatible recording software including Avid Pro Tools*, Ableton Live*, Steinberg Cubase*, etc., so you can record tracks directly into your favorite DAW – and mix and master to your heart’s content.
Total Recording Flexibility
MIC 2 USB supports both 44.1 kHz and 48 kHz sample rates for maximum flexibility, so whether you are recording the next global smash hit or a heart-stopping movie theme song, it’s all you need.
Microphone to USB interface cable
XLR input connector
Ideal for recording vocals and speech with dynamic microphones
5 meter (16.5 foot) cable length
Simple Plug-and-Play connection to Mac* and PC computers
Digital audio output operates at 44.1 kHz and 48 kHz sample rates
Compatible with most 32-bit Mac and Windows* drivers and software
|
The all new 896mk3 FireWire audio interface delivers high-end performance, superb sound, innovative new features and enhanced standard features that remain unique.
The 896mk3 provides eight channels of pristine 24-bit 192 kHz analog recording and playback, combined with sixteen channels of optical digital I/O, stereo AES/EBU, S/PDIF and separate analog main outs. Expand your system by connecting the 8pre mic input expander or other MOTU audio interfaces.
The 896mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 896mk3 provides 28 separate inputs and 32 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.
Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer – with no latency and no processor strain on your computer. Apply hardware DSP-driven effects processing to inputs, outputs, and busses independent of your host computer. Add Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: a conventional compressor and the Leveler™, an accurate model of the legendary LA-2A™ optical compressor that provides vintage, musical automatic gain control.
MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.
When recording from the mic/guitar inputs, the 896mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts.
After programming the on-board mixing in the studio, unplug the 896mk3 from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.
The 896mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.
|
The FA-66 is a 6-channel portable FireWire audio interface designed with the mobile recording and performance professional in mind. The FA-66 offers incredible audio fidelity, stability, and a practical set of input and output options. It also offers two XLR/TRS combo inputs with phantom power, plus two RCA inputs, four balanced +4dBu outputs, optical S/PDIF I/O, a built-in analog limiter, zero-latency direct monitoring, solid metal construction, and FireWire bus power, all in a durable compact case.
* 6-in/6-out 24-bit/96kHz simultaneous performance
* 4-in/4-out 24-bit/192kHz simultaneous performance
* 2 XLR/TRS combo jacks w/premium phantom-powered mic preamps
* +4 dB balanced input and output
* S/PDIF optical input & output ports with Sync LED indicator
* MIDI in/out ports
* Built-in analog limiter and indicator
* FireWire bus powered
* AC adaptor included
* Mac OS X CoreAudio and Windows XP WDM and ASIO 2.0 support
* Zero-latency Direct Monitoring
* 6-pin and 4-pin IEEE1394 ports
* Compact, solid-metal construction |
nio 2 | 4 is a 2 In / 4 Out mobile USB interface for the modern music maker. Nio 2 | 4 features Novationʼs unique ʽDirect FXʼ technology, placing a powerful multi-effects engine within nio 2 | 4ʼs custom drivers. These effects rest close to the core of your computer, working independently of other software and providing powerful ultra-low latency effects for hassle-free, real time jamming and recording. This same unique environment ensures rock-solid, lightning-fast performance, making it the ideal interface solution for home recording, live performing and DJʼing alike; one size fits all. With two headphones outputs, itʼs also an ideal solution for the classroom environment.
Specifications
Audio Interfacing
Inputs:- 1 XLR (with phantom power)
- 1 TS Jack
- 2 RCA Phono
- Two inputs simultaneously only - either stereo RCA phono or the XLR and Jack
Outputs:- 4 RCA Phono
- 2 stereo 1/4" Headphones Jacks
Digital Audio:- 44.1/48kHz sample rate
- 24-bit resolution
Other interfacing
System requirements- Operating system: Mac OSX 10.3.9 or greater (Leopard also supported) or Windows XP with Service Pack 2 or greater (Vista 32/64 also supported)
- Minimum Computer spec: Mac - G3/600MHz or G4/667MHz, both with 256MB RAM or PC - Pentium 3/500MHz/256MB RAM (machines running Vista will require a higher spec)
Interfacing: USB 1.1 compatible USB connector (also compatible with USB 2.0), 28/24 awg USB cable recommended
Weights and Dimensions- 633g
- 45.4mm (H) x 144mm (W) x 149mm (D)
|
Computer Based Recording Packages
Computer-Based Recording Packages For All Players Of Musical Instruments
The AUDIOGRAM Series has been carefully designed to make setting up your computer-based recording environment an absolute breeze. Coming as a complete kit, the AUDIOGRAM6 and AUDIOGRAM3 each bundle together a hardware interface that adds audio inputs and outputs to your computer, software for recording and producing music, and a USB cable for connecting the audio interface. As such, either package will instantly turn your computer into a powerful yet intuitive tool for recording and editing audio from virtually any microphone or audio input device. What's more, setup is as easy as installing the bundled music-production application, CUBASE AI, on your computer and connecting the audio interface using the USB cable provided! You're then ready to connect instruments, microphones, CD players, MP3 players, and even old record or tape players for recording straight into CUBASE AI.
Size/Weight
| Dimensions | Width | 170mm (6-3/4“) | | Height | 59mm (2-3/8“) | | Depth | 192mm (7-5/8“) | | Weight | Weight | 770g (1.7 lbs.) |
General Specifications
| Sampling Frequency Rate | USB AUDIO 1.1, 16bit/44.1kHz |
Effects
| Types | Dynamic | 1-knob Compressor (COMP) x 2 |
Storage and Connectivity
| Connectivity | Headphones | Stereo Phone connector x 1 | | Microphone | Mic/Hi-Z input x 2 | | LINE IN | Phone connector x 4 (L/MONO x 2, R x 2) | | LINE OUT | Phone connector x 2 (L, R) | | USB TO HOST | USB (TO HOST) |
Power Supply
System Requirements
| Windows | PC | Windows-based computer with built-in USB interface Windows-based computer with built-in USB interface | | CPU | 1 GHz or better Intel Core / Pentium / Celeron processor 750 MHz or better Intel Core / Pentium / Celeron processor | | Support OS | Windows Vista / Windows XP Professional / XP Home Edition | | Memory | More than 1 GB More than 128 MB | | Macintosh | PC | Macintosh computer with built-in USB interface | | CPU | Intel CPU / Macintosh G3 processor 300 MHz or better | | Support OS | Mac OS X 10.3.3 or higher | | Memory | More than 128 MB |
Accessories | Included Accessories | Cable | USB Cable | | Others | CUBASE AI DVD, Owners Manual |
| GUITAR LINK UCG102 The Ultimate Guitar-to-USB Interface to Jam and Record with Killer Modeling Amps and Effects
- Plug in your favorite guitar and turn your PC or Mac computer into a guitar amp and recording system without the need for any other hardware
- Enjoy immediate access to Guitar Combos from Native Instruments—the leading authentic guitar amp and stomp box modeling software—now including VST, AU and RTAS plugin versions
- Create Music Now! Incredibly powerful energyXT2 Compact music production software and Audacity editing software—both with full portability on all PC, Mac or Linux computers
- Directly works with your PC or Mac computer—ultra-low latency ASIO driver for PC audio optimization included
- Stereo Headphone output lets you jam with your computer and can also be used for monitoring with active monitor speakers
- Guitar Combos with variable-speed file playback function for MP3, WAV, AIFF audio files—perfect for easy learning and practicing—tuner and metronome function
- Powered via USB—no additional power supply required
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
The UCG102 is a USB interface that, like a guitar amp, receives signal from your guitar via a 1/4" input jack. A built-in USB cable then sends signal directly to your computer, where the amazing included software package simulates guitar amps and stomp boxes, in addition to tracking your latest masterpiece. It has a 1/4" headphone jack and PHONES volume dial so you can monitor your performance as you record, a CLIP LED to tell you when your signal is too hot, and a HI/LO level selector.
Super Software
The UCG102 comes packaged with Native Instruments' "Guitar Combos" software that models guitar amps and stomp boxes. Take your pick of the "PLEXI COMBO“, "TWANG COMBO” or "AC BOX COMBO” for stunningly real amplifier tones. Sample them all, then activate the full version of the classic rockin' "AC BOX COMBO" rig. Native Instruments extends special offers to all registered Guitar Combos users, making it more affordable than ever to take advantage of their award-winning GUITAR RIG software packages. Visit http://co.native-instruments.com/index.php?id=4101&prid=247&redirected=1 for the latest special pricing on this incredible software.
You also get energyXT2.5 BEHRINGER Edition, a multi-track recording program.
This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, turning song ideas into stunning CD or web-ready recordings. energyXT includes its own multi-FX processor, built-in synthesizers and a drum machine, both of which can be accessed directly via an external controller (such as our UMA25S or UMX25) or programmed in step-write mode. To learn more about energyXT Compact BEHRINGER Edition, visit http://www.behringer.com/EN/Support/energyXT.aspx. |
Reviews
There are no reviews yet.