| Content | The U-PHORIA UMC22 2x2 USB Audio Interface from Behringer is a 2x2 audio interface that is capable of tracking your audio with sampling rates up to 48 kHz. It features a single Midas-designed combo XLR/TRS microphone preamplifier with selectable 48-volt phantom power. Additionally, the UMC22 has a front-panel 1/4" instrument input. Its I/O is rounded up by 2 rear-panel 1/4" outputs and a front-panel 1/4" headphone output.
The UMC22 has selectable direct monitoring, and is housed in a metal chassis designed to be impact resistant. Behringer provides a free download of Tracktion 4 Audio Production software with registration.
Midas-Design Preamp
Behringer's sister company, Midas, developed the preamps for the UMC202 interface. Thanks to the available +48 V phantom power, you can even use condenser mics to create tracks
Monitoring
All U-PHORIA models provide headphone output with level control and direct monitor select, status, signal and clip LEDs, and are powered via your computer's USB port so they're ready to go wherever you go
Tracktion 4 Software Download
When you register your UMC22, Behringer provide you with a complimentary download code for the full version of Tracktion 4 digital audio workstation software, with 150 instrument/effect plug-ins
Up to 48 kHz resolution
Compatible with recording software including Avid Pro Tools, Ableton Live, Steinberg Cubase, and others
Streams 2 inputs / 2 outputs with low latency to your computer, supporting Mac OS X and Windows XP or higher
USB port for connection and power
Impact-resistant metal chassis
Behringer UMC 22 Specs
Interface
| Channels of I/O |
2 Inputs / 2 Output |
| Max Sample Rate/Resolution |
48 kHz / 24-Bit |
| Display and Indicators |
2 x LED (Signal)
2 x LED (Clip)
1 x LED (+48V)
1 x LED (Power) |
Connectivity
| Host Connection |
1 x USB Type-B (USB 2.0) |
| Analog I/O |
1 x Combo XLR-1/4" Mic/Line Input
1 x 1/4" Hi-Z Input
2 x 1/4" TRS Monitor Output
1 x 1/4" TRS Headphone Output |
| Phantom Power |
+48 V, Selectable On/Off |
| Digital I/O |
None |
| MIDI I/O |
None |
| Memory Card Slot |
None |
Performance
| Frequency Response |
Inputs, Outputs:
10 Hz to 30 kHz +0/-0.5 dB
Interface:
10 Hz to 30 kHz +0/-3 dB |
| Max Input Level |
Mic Inputs:
+2 dBu
Line Inputs:
+22 dBu
Hi-Z Inputs:
+2 dBu |
| Max Output Level |
0 dBu |
| Dynamic Range |
100 dBA |
| Impedance |
Mic Inputs:
3 Kilohms
Hi-Z Inputs:
1 Megohm |
Digital Audio
| Sample Rates |
32, 44.1, 48 kHz |
| Latency |
Zero-Latency Direct Monitoring |
Compatibility
| OS Compatibility |
macOS 10 or Later
Windows XP or Later |
Power
| Power Requirements |
USB Bus-Power |
| Power Consumption |
2.5 W (Maximum) |
Physical
| Anti-Theft Features |
Kensington Security Slot |
| Dimensions |
6.4 x 4.9 x 1.8" / 162.56 x 124.46 x 45.72 mm |
| Weight |
1.1 lb / 0.5 kg |
|
Behringer UFO202 USB Audio Interface
The Behringer U-Phono UFO202 is a high-quality USB audio interface with built-in phono preamp and massive software package for digitalizing your tapes and vinyl records.
Features
- High-quality USB audio interface connects your turntable, cassette player, etc. with your computer for recording and playback
- Transfer and restore your valuable vinyl records and tapes to your computer via a simple USB connection
- Massive software bundle includes Audacity vinyl restoration, noise-reduction, editing and recording software, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins
- Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms
- Phono input switchable to line input source
- Stereo output allows easy connection and playback of computer audio files over your home sound system
- High-resolution 48 kHz converters for high-end audio quality
- Stereo Headphone output with dedicated Level control lets you monitor your input source
- Works with your PC or Mac computer -- no setup or drivers required
- Powered via USB--no external power supply needed
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
Compact and Versatile
Equipped with RCA inputs and outputs, the U-Phono UFO202 can connect to a myriad of equipment such as tape decks, sound modules and active monitors, plus many more. Additionally, when you connect the UF202's outputs to your mixer's input channels, you have the ability to access EQ, Aux Sends and much more - allowing you to create extremely versatile mixes for your recording sessions.
48kHz Precision
The Behringer UFO202 provides pristine 48kHz resolution to ensure that your favourite vinyl records are recorded with the detail and quality your music deserves.
Audacity Audio Editor Software
The Behringer U-Phono UFO202 USB Audio Interface comes supplied with a free open source audio editor and multi-track recorder software - Audacity. Please visit the Behringer web page for download links here.
Specifications
- Input Connector: RCA, Unbalanced
- Input Impedance: Approx. 27kΩ
- Maximum Input Level: 2dBV
- Output Connector: RCA, Unbalanced
- Output Impedance: Approx. 400Ω
- Maximum Output Level: 2dBV
- Digital Output: Toslink, Optical
- Digital Output Format: S/PDIF
- USB: Type A
- Converter: 16-Bit
- Sample Rate: 32kHz, 44.1kHz, 48kHz
- Frequency Response: 10Hz - 20kHz ±1dB @ 44.1kHz Sample Rate
- 10Hz - 22kHz ±1dB @ 48kHz Sample Rate
- Crosstalk: -77dB @ 0dBV, 1kHz
- Power Supply: USB, 5V 100mA Maximum
- Dimensions: 0.87" x 3.46" x 2.36" / 22mm x 88mm x 60mm (H x W x D)
- Weight: 0.10kg
|
Equipped with the latest generation 24-bit, enhanced multi-bit 128x oversampling 192-kHz converters, the HD192 achieves a remarkable A-weighted signal-to-noise ratio of 120 dB with balanced XLR connectors throughout. Ideal for surround applications, the HD192's 12 inputs and 12 outputs can support two simultaneous 5.1 mixes. And the HD192 is full of advanced features, like AES/EBU I/O with sample rate conversion both in and out.
The PCI-424 card introduced with the 2408mk3 is 192-kHz ready. Just connect the HD192 expansion interface to record 192-kHz audio.
The HD192 can be purchased as an expander for an existing PCI-424-based MOTU Audio System, or as a core system which includes the PCI-424 card and Audiodesk workstation software.
|
The Traveler-mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.
Engineered for high-end mobile recording applications, the Traveler-mk3 delivers four very high quality mic inputs, bus power, optional battery power and DSP-driven mixing and effects processing.
The Traveler-mk3 provides eight channels of pristine 192 kHz analog recording and playback, combined with twenty channels of digital I/O in ADAT optical, AES/EBU and S/PDIF formats. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.
The Traveler-mk3 is equally well-suited for studio, stage and remote locations, with or without a computer. As an interface or stand-alone mixer, the Traveler-mk3 provides 28 separate inputs and 30 separate outputs, including four XLR/quarter-inch "combo” mic/instrument analog inputs equipped with pre-amps, individual 48V phantom power switches and Digital Precision Trim™ controls conveniently adjusted from the front panel or CueMix FX™ software.
MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.
Connect all of your audio instruments and gear, including mics, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer with no latency and no processor strain on your computer. Apply hardware DSP-driven effects processing to inputs, outputs, and busses independent of your host computer.
Add Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: a conventional compressor and the Leveler™, an accurate model of the legendary LA-2A™ optical compressor that provides vintage, musical automatic gain control. When recording from the four mic/guitar inputs, the Traveler-mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts.
After programming the on-board mixing in the studio, unplug the Traveler-mk3, remove the rack brackets, and take it on the road for operation as a portable, bus-powered audio interface for a laptop or battery-operated stand-alone mixer with effects. The Traveler slides easily into your backpack and fits neatly beneath your laptop. All mixing and effects parameters are adjustable using the front panel backlit LCD. Record extended sessions even in the most remote locations with the complete freedom of field battery power.
The Traveler-mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.
| Portable 10-in/10-out compact, mobile FireWire audio at home or on the road
The FA-101 has the highest specs available to support your most demanding applications. You get 24-bit, 192kHz simultaneous recording and playback in a compact 1U half-rack unit, with all the headroom you need.
Supports up to 24 bit, 192 kHz
Compatible with Mac OS X standard driver
Two independent, on board mic pre-amps
Capable of full duplex recording and playback on 10 independent channels
Bus powered and durable metal construction for mobile applications
Lots of ins and outs to support a wide range of recording and gigging applications
The FA-101 is a feature-packed 10x10 audio interface that can handle a full 10 channels of input/output at 24-bit/96kHz. Record and monitor all 10 channels simultaneously in full duplex. Phenomenal audio power for the studio musician! In addition, the FA-101 offers 6-channel recording and playback at 24-bit/192kHz for performance at DVD-A quality.
* 10x10 24-bit/96kHz audio performance
* 6x6 24-bit/192kHz audio performance
* Firewire bus-powered
* Direct monitoring
* Low-latency driver support
* Native Support in Mac OS X (10.3.4 or later)
* 2x phantom-powered mic preamps
* 8x8 balanced analog I/O
* S/PDIF optical I/O
* MIDI I/O |
The UA-1G is a compact 1 x 1 USB Audio Interface that offers excellent-quality sound via multiple connection options and a simple, user-friendly design.
- Stereo input and output at 24-bit/96kHz audio quality
- High-end A/D and D/A converters for accurate recording and playback
- Large Input Level knob for easy control while recording
- 1/4" jack with Hi-Z option for recording electric guitar or bass
- Electret condenser mic input
- RCA phono type and optical-digital audio I/O
- Headphone output
- USB powered – no AC adapter required
- SONAR LE for music recording, editing, and publishing on PC
- Low-latency ASIO 2.0 (PC); WDM (Windows Vista, Windows XP) and Core Audio (Mac OS X) support
| Number of Audio Record/Playback Channels | Record: 1 pair of stereo
Play: 1 pair of stereo
REC SOURCE switch = ANALOG: Full duplex (except for 96 kHz setting)
REC SOURCE switch = DIGITAL: Recording only |
|---|
| Signal Processing | PC interface: 24 bits
AD/DA Conversion: 24 bits (linear)
* ADVANCE DRIVER switch = OFF: 16 bits |
|---|
| Sampling Frequency | Digital output: 32/44.1/48/96 kHz
Digital input: 32/44.1/48/96 kHz
AD/DA Conversion: 32/44.1/48/96 kHz
* ADVANCE DRIVER switch = OFF: 32/44.1/48 kHz
|
|---|
| Nominal Input Level | Line input jacks: -10 to +4 dBu
Guiter input jakcs: -30 to -16dBu
Mic input jack: -40 to -26 dBu
|
|---|
| Nominal Output Level | Line output jacks: -10 dBu |
|---|
| Interface | USB Digital input (Optical mini type)
* The same jack serves as both the Mic Input jack and digital input connector.
Digital output (Optical mini type)
* The same jack serves as both the headphones jack and digital output connector.
* conforms to IEC60958 consumer format. |
|---|
| Controllers | ADVANCED DRIVER Switch
Guiter/Mic Switch
INPUT VOLUME knob
PHONES VOLUME Dial
SAMPLE RATE Switch
96kHz MODE Switch
INPUT MONITOR Switch
REC SOURCE Switch |
|---|
| Connectors | USB Connector (B type)
Line Input jacks (L, R) (RCA phono type)
Line Output jacks (L, R) (RCA phono type)
Guiter/Mic Input jack: （1/4 inch phone type)
Mic Input jack (Plug-in powered miniature phone type)
Digital Intput connector (Optical mini type)
* The same jack serves as both the headphones jack and digital output connector.
Headphones jack (Stereo miniature phone type)
Digital Output connector (Optical mini type)
* The same jack serves as both the Mic Input jack and digital input connector. |
|---|
| Power Supply | Supplied from the computer |
|---|
| Current Draw | 200 mA |
|---|
| Accessories | Ownerʼs Manual, UA-1G CD-ROM, SONAR LE CD-ROM |
|---|
| Size and Weight |
|---|
| Width | |
|---|
| Depth | |
|---|
| Height | |
|---|
| Weight | |
|---|
|
Reviews
There are no reviews yet.