| Content | The U-PHORIA UMC22 2x2 USB Audio Interface from Behringer is a 2x2 audio interface that is capable of tracking your audio with sampling rates up to 48 kHz. It features a single Midas-designed combo XLR/TRS microphone preamplifier with selectable 48-volt phantom power. Additionally, the UMC22 has a front-panel 1/4" instrument input. Its I/O is rounded up by 2 rear-panel 1/4" outputs and a front-panel 1/4" headphone output.
The UMC22 has selectable direct monitoring, and is housed in a metal chassis designed to be impact resistant. Behringer provides a free download of Tracktion 4 Audio Production software with registration.
Midas-Design Preamp
Behringer's sister company, Midas, developed the preamps for the UMC202 interface. Thanks to the available +48 V phantom power, you can even use condenser mics to create tracks
Monitoring
All U-PHORIA models provide headphone output with level control and direct monitor select, status, signal and clip LEDs, and are powered via your computer's USB port so they're ready to go wherever you go
Tracktion 4 Software Download
When you register your UMC22, Behringer provide you with a complimentary download code for the full version of Tracktion 4 digital audio workstation software, with 150 instrument/effect plug-ins
Up to 48 kHz resolution
Compatible with recording software including Avid Pro Tools, Ableton Live, Steinberg Cubase, and others
Streams 2 inputs / 2 outputs with low latency to your computer, supporting Mac OS X and Windows XP or higher
USB port for connection and power
Impact-resistant metal chassis
Behringer UMC 22 Specs
Interface
| Channels of I/O |
2 Inputs / 2 Output |
| Max Sample Rate/Resolution |
48 kHz / 24-Bit |
| Display and Indicators |
2 x LED (Signal)
2 x LED (Clip)
1 x LED (+48V)
1 x LED (Power) |
Connectivity
| Host Connection |
1 x USB Type-B (USB 2.0) |
| Analog I/O |
1 x Combo XLR-1/4" Mic/Line Input
1 x 1/4" Hi-Z Input
2 x 1/4" TRS Monitor Output
1 x 1/4" TRS Headphone Output |
| Phantom Power |
+48 V, Selectable On/Off |
| Digital I/O |
None |
| MIDI I/O |
None |
| Memory Card Slot |
None |
Performance
| Frequency Response |
Inputs, Outputs:
10 Hz to 30 kHz +0/-0.5 dB
Interface:
10 Hz to 30 kHz +0/-3 dB |
| Max Input Level |
Mic Inputs:
+2 dBu
Line Inputs:
+22 dBu
Hi-Z Inputs:
+2 dBu |
| Max Output Level |
0 dBu |
| Dynamic Range |
100 dBA |
| Impedance |
Mic Inputs:
3 Kilohms
Hi-Z Inputs:
1 Megohm |
Digital Audio
| Sample Rates |
32, 44.1, 48 kHz |
| Latency |
Zero-Latency Direct Monitoring |
Compatibility
| OS Compatibility |
macOS 10 or Later
Windows XP or Later |
Power
| Power Requirements |
USB Bus-Power |
| Power Consumption |
2.5 W (Maximum) |
Physical
| Anti-Theft Features |
Kensington Security Slot |
| Dimensions |
6.4 x 4.9 x 1.8" / 162.56 x 124.46 x 45.72 mm |
| Weight |
1.1 lb / 0.5 kg |
| Portable 10-in/10-out compact, mobile FireWire audio at home or on the road
The FA-101 has the highest specs available to support your most demanding applications. You get 24-bit, 192kHz simultaneous recording and playback in a compact 1U half-rack unit, with all the headroom you need.
Supports up to 24 bit, 192 kHz
Compatible with Mac OS X standard driver
Two independent, on board mic pre-amps
Capable of full duplex recording and playback on 10 independent channels
Bus powered and durable metal construction for mobile applications
Lots of ins and outs to support a wide range of recording and gigging applications
The FA-101 is a feature-packed 10x10 audio interface that can handle a full 10 channels of input/output at 24-bit/96kHz. Record and monitor all 10 channels simultaneously in full duplex. Phenomenal audio power for the studio musician! In addition, the FA-101 offers 6-channel recording and playback at 24-bit/192kHz for performance at DVD-A quality.
* 10x10 24-bit/96kHz audio performance
* 6x6 24-bit/192kHz audio performance
* Firewire bus-powered
* Direct monitoring
* Low-latency driver support
* Native Support in Mac OS X (10.3.4 or later)
* 2x phantom-powered mic preamps
* 8x8 balanced analog I/O
* S/PDIF optical I/O
* MIDI I/O |
nio 2 | 4 is a 2 In / 4 Out mobile USB interface for the modern music maker. Nio 2 | 4 features Novationʼs unique ʽDirect FXʼ technology, placing a powerful multi-effects engine within nio 2 | 4ʼs custom drivers. These effects rest close to the core of your computer, working independently of other software and providing powerful ultra-low latency effects for hassle-free, real time jamming and recording. This same unique environment ensures rock-solid, lightning-fast performance, making it the ideal interface solution for home recording, live performing and DJʼing alike; one size fits all. With two headphones outputs, itʼs also an ideal solution for the classroom environment.
Specifications
Audio Interfacing
Inputs:- 1 XLR (with phantom power)
- 1 TS Jack
- 2 RCA Phono
- Two inputs simultaneously only - either stereo RCA phono or the XLR and Jack
Outputs:- 4 RCA Phono
- 2 stereo 1/4" Headphones Jacks
Digital Audio:- 44.1/48kHz sample rate
- 24-bit resolution
Other interfacing
System requirements- Operating system: Mac OSX 10.3.9 or greater (Leopard also supported) or Windows XP with Service Pack 2 or greater (Vista 32/64 also supported)
- Minimum Computer spec: Mac - G3/600MHz or G4/667MHz, both with 256MB RAM or PC - Pentium 3/500MHz/256MB RAM (machines running Vista will require a higher spec)
Interfacing: USB 1.1 compatible USB connector (also compatible with USB 2.0), 28/24 awg USB cable recommended
Weights and Dimensions- 633g
- 45.4mm (H) x 144mm (W) x 149mm (D)
|
The Traveler-mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.
Engineered for high-end mobile recording applications, the Traveler-mk3 delivers four very high quality mic inputs, bus power, optional battery power and DSP-driven mixing and effects processing.
The Traveler-mk3 provides eight channels of pristine 192 kHz analog recording and playback, combined with twenty channels of digital I/O in ADAT optical, AES/EBU and S/PDIF formats. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.
The Traveler-mk3 is equally well-suited for studio, stage and remote locations, with or without a computer. As an interface or stand-alone mixer, the Traveler-mk3 provides 28 separate inputs and 30 separate outputs, including four XLR/quarter-inch "combo” mic/instrument analog inputs equipped with pre-amps, individual 48V phantom power switches and Digital Precision Trim™ controls conveniently adjusted from the front panel or CueMix FX™ software.
MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.
Connect all of your audio instruments and gear, including mics, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer with no latency and no processor strain on your computer. Apply hardware DSP-driven effects processing to inputs, outputs, and busses independent of your host computer.
Add Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: a conventional compressor and the Leveler™, an accurate model of the legendary LA-2A™ optical compressor that provides vintage, musical automatic gain control. When recording from the four mic/guitar inputs, the Traveler-mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts.
After programming the on-board mixing in the studio, unplug the Traveler-mk3, remove the rack brackets, and take it on the road for operation as a portable, bus-powered audio interface for a laptop or battery-operated stand-alone mixer with effects. The Traveler slides easily into your backpack and fits neatly beneath your laptop. All mixing and effects parameters are adjustable using the front panel backlit LCD. Record extended sessions even in the most remote locations with the complete freedom of field battery power.
The Traveler-mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.
|
The FA-66 is a 6-channel portable FireWire audio interface designed with the mobile recording and performance professional in mind. The FA-66 offers incredible audio fidelity, stability, and a practical set of input and output options. It also offers two XLR/TRS combo inputs with phantom power, plus two RCA inputs, four balanced +4dBu outputs, optical S/PDIF I/O, a built-in analog limiter, zero-latency direct monitoring, solid metal construction, and FireWire bus power, all in a durable compact case.
* 6-in/6-out 24-bit/96kHz simultaneous performance
* 4-in/4-out 24-bit/192kHz simultaneous performance
* 2 XLR/TRS combo jacks w/premium phantom-powered mic preamps
* +4 dB balanced input and output
* S/PDIF optical input & output ports with Sync LED indicator
* MIDI in/out ports
* Built-in analog limiter and indicator
* FireWire bus powered
* AC adaptor included
* Mac OS X CoreAudio and Windows XP WDM and ASIO 2.0 support
* Zero-latency Direct Monitoring
* 6-pin and 4-pin IEEE1394 ports
* Compact, solid-metal construction |
UA-20: Audio Capture USB Audio/MIDI Interface
Features
The UA-20 is the standard model to Edirol's rapidly expanding UA series of USB Audio Capture devices. The unit can accept input from Mic, Line and even guitar level signals. The audio is converted at 24-bit quality and is transferred to your computer via industry standard low latency WDM, ASIO, MME drivers for compatibility with all major sequencing platforms, the input signal may be also monitored directly in hardware. Outputs include analogue, digital and headphone. The built-in MIDI in and out utilize Edirol's Fast Processing Technology for super accurate MIDI timing with any sequencing software on Mac or PC platforms and can be used with both OMS or FreeMIDI drivers on the Apple Macintosh. The UA-20 requires no external power supply and is ideal for use by mobile laptop or Powerbook users. The unit ships with drivers for Windows XP, 2000, Me, 98, MacOS X, and Mac OS 9.x, 8.5 and may also be used with the native USB audio drivers that are included with both Mac & PC.
- Audio and MIDI in a compact unit.
- Fully equipped with I/O jacks.
- Great tool for creating music.
- Edirol's FPT Technology.
Record1 pair of stereoPlayback1 pair of stereoSignal ProcessingPC interface24 bitSampling RateDigital output44.1 kHzNominal Input Level-45 – -10 dBuInput ImpedanceLINE22 k ohmsGUITAR470 k ohmsMIC22 k ohmsNominal Output Level-10 dBuOutput Impedance1 k ohmsResidual Noise LevelMaster Out-105 dBu or less
(input terminated with 1 k ohm, Master Volume = max.,
Input Monitor = off, IHF-A, typ.)InterfaceUSB
Digital output (Optical Type , conforms to S/P DIF)ConnectorsInput Jack (1/4 inch phone type) x 2
Digital Out Connector (Optical type)
Headphones Jack (Stereo miniature phone type)
Master Out Jack (RCA phono type)
MIDI ConnectorsOthersPower SupplySupplied from the computerCurrent Draw170 mAAccessoriesOwnerʼs Manual
USB cable
CD-ROMSize and WeightWidth149 mm5-7/8 inchesDepth111 mm4-3/8 inchesHeight43 mm1-11/16 inchesWeight0.2 kg0 lbs. 8 oz.
|
Reviews
There are no reviews yet.