| Content | Professional 500-Watt powered subwoofer for PA applications. Powerful 15'' long-excursion transducer with high temperature voice coil provides incredibly accurate and pulse-pounding bass. Precise reproduction of ultra-low frequencies for "bulletproof" punch and impact. State-of-the-art 500-Watt Class-D amplifier with comprehensive over-excursion, thermal and clip limit protection. Built-in active stereo crossover provides high-pass filtered outputs for full-range loudspeakers. Tunable and switchable Bass Boost plus Phase switch for ultimate low-frequency performance. Variable High Cut control for perfect sound alignment. Subwoofer Level control to adjust the balance between subwoofer and the full-range speakers. Power, Signal and Clip LEDs for perfect monitoring. Intelligent limiter for maximum sound performance and woofer protection. Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption. Pole socket for mounting with commercial spacer poles. Ergonomically shaped handles for easy transport. Rugged steel grill for optimal speaker protection. Weight 33 Kgr. | The Italian Stage S115A 15" Active Subwoofer is ideal for adding powerful yet smooth bass to your live setup. It uses a 15" woofer driven by a 350W RMS class AB amplifier, resulting in 128 peak spl and a 20Hz to 120Hz frequency range. This results in a booming bass sound, that matches precise performance with a punchy sound. The S118A also has a control panel section, with controls for line level, a phase switch, crossover switch - activating a high pass filter for outputs - as well as ground switch.
| manufacturer |
ITALIAN STAGE |
| Warranty |
2 Years |
| Speaker Category |
SubWoofer |
| Speaker Type |
Active |
| Material of manufacture |
Wood Cabin |
| Total Power (Watt) |
350 |
| Woofer diameter (inches) |
15 |
| dB (max spl) |
128 |
| Weight (kg) |
22.5 |
| Frequency response (Hz) |
20 to 120 |
| Colour |
Black |
|
The NX S25-A is a vented, high output, active subwoofer system where the solid sound of a dual 15” woofer is desired.
This subwoofer is optimally designed for portable or install applications and it is engineered to complement full-range loudspeakers in a wide range of PA applications.
| Features |
|---|
| 1000 Watt Digipro digital amplifier | | 136 dB max spl | | 2x15" woofer, high power 3" voice coil | |
PFC power factor correction
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 40 Hz | ÷ 120 kHz | | Max SPL: | 136 dB | | | Woofer: | 2 x 15“, 3" v.c. | |
| INPUT/OUTPUT SECTION |
|---|
| Input signal: | bal / unbal | | | Input connectors: | Stereo combo xlr-jak | | | Output connectors: | Stereo xlr | | | Input sensitivity: | -2 dBu / +4 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 80 / 110 Hz | | | Protections: | Thermal, rms | | | Limiter: | Soft peak limiter | | | Controls: | Volume, xover / link, frq. cut, phase | |
| AMPLIFIER SPECIFICATIONS |
|---|
| Total power: | 1000 Watts | | | Low frequencies: | 1000 Watts | | | Cooling: | Convection / forced | | | Connections: | Powercon in / out | |
| CABINET |
|---|
| Cabinet Material: | Balitc birch | | | Hardware: | Stacking fittings | | | Handles: | 4 side | | | Pole Mount/Cap: | Yes | | | Colour: | Black | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 750 / 29.52 mm/inch | | | Width: | 660 / 25.98 mm/inch | | | Depth: | 700 / 27.55 mm/inch | | | Net Weight: | 60.5 / 133.37 Kg/Lbs |
|
|
Description
The all-new DXS15 subwoofer delivers powerful yet focused low end reaching as low as 42Hz. The DXS’s fully optimized band-pass design combines with its powerful Class-D amplifier, long-travel 15” woofer, and formidable DSP to deliver a tight, impressive bass with outstanding depth and high power output.
Features:
- Speaker type: 15" powered subwoofer, Band-pass type
- Frequency range: (-10dB) 45Hz - 160Hz
- Diameter: 15" cone
- Voice Coil: 2.5“
- Output power: Dynamic:950W / Continuous: 600W
- I/O connectors INPUT: XLR-3-31 x2
- I/O connectors THRU: XLR3-32 x 2(Parallel with INPUT)
- Power requirements: 100V - 240V, 50Hz/60Hz
- Power consumption: 120W
- Pole socket: 35mm (Top x1)
- Dimensions (WxHxD): 478mm x 618mm x 624mm
- Net weight: 38.0kg (83.8lbs)
- Others Material: Wood (Paint, Black)
| Looking for a portable and versatile active speaker for live sound applications? Then look no further than the Mackie Thump215XT 15" Powered PA Loudspeaker System with DSP and Bluetooth, a powerful PA speaker that includes a 2-channel mixer, great for small club/band PA systems, singer/songwriters, boardrooms, A/V presentations, classrooms, or as a personal monitor for practice or performance. The system features four application-specific voicing modes, an outdoor mode, and Bluetooth for streaming, speaker link, and wireless control.
The Thump215XT's mixer features two combo XLR-1/4" mic/line channels with dedicated gain controls, while an XLR output is provided for daisy-chaining additional speakers. A 3.5mm TRS aux input is also available on channel 2 for connecting your favorite portable player. The tough, impact-resistant polypropylene enclosure ensure protection from on-the-road wear and tear. The bottom of the cabinet provides a pole cup for mounting on a speaker pole or stand. Additionally, M10 fly points are included for permanent installation. The angled design allows the speaker to be used as a floor monitor for onstage performance monitoring.
- 1400W ultraefficient Class-D amplifier
- Built-Like-A-Tank to conquer every gig while lightweight for easy loading
- Frequency response: 40 Hz to 20 kHz
- Max SPL: 129 dB
- 15” high-performance woofer
- 1” compression driver
- Outdoor mode optimizes voicing for open air venues
- Built-in Feedback Eliminator reduces squeals and out of control rumble
- Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives signal
- Front LED On/Off switch
- Standard pole mount
- M10 flypoints for permanent install
- Monitor wedge provides optimal angle for use as a floor monitor
- Universal power supply
Under the hood of ThumpXT is some powerful processing that you can tap into to up your sound quality game. With 4 different application-specific voicing modes, you can instantly optimize your speakers for how you use them at the push of a single button.
- Music: Made to enhance pre-recorded music
- Live: Great for general sound reinforcement
- Club: Provides a low-end punch
- Monitor: Optimizes the speaker for use as a floor wedge keeping feedback in check
Ever bring your speakers from inside a room to the scary outdoors and wonder why it sounds so different? You're not alone, and lucky for you we've thought of everything. When you set up your system out in the wild, just push the Outdoor Mode button and your lovely, full sound is restored.
Easily stream music directly to the speaker and enjoy the wireless freedom to dance around while playing DJ. And while you’re at it, you can dive into the Thump Connect 2 App and adjust anything from system EQ and Voicing Modes to channel levels and venue-specific presets.
- Bluetooth connectivity for streaming, speaker linking, and control
- Download the Thump Connect 2 app for complete wireless control
- Link 2 ThumpXT loudspeakers for a powerful, wireless, music playback system in both stereo and dual-zone configuration
- Channel 1 features a combo XLR-1/4" input that accepts mic or line signals
- Channel 2 features a combo XLR-1/4" line input plus stereo 3.5mm input
- Thru output contains audio from both input channels
These are the loudest, most powerful, and best sounding Thump loudspeakers ever, and they are ready to take on your most demanding gigs. Completely redesigned from the ground up, Thump has beefier drivers, 1400W Class-D amplifiers, and powerful tools to make your next gig easier than ever.
You've got music playing nice and loud, but it's time for another announcement. Sure, you could mess with your levels every time, but who's got time for that. Simply press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1.
Ever get a little too up close and personal with the microphone only to hear a loud, ear-destroying squeal? That's commonly known as feedback. And it's an unfortunate issue that physics won't change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws.
| Features
- 1400 Watt Digital Amplifier
- 15" Woofer, bass reflex housing
- Stereo crossover
- Switchable crossover frequencies
- Phase-reverse switch
- Electronic equalization, soft limiter and protection
- Stereo XLR input, Stereo XLR signal output
Acoustical Specifications
- Frequency Response -3 dB: 40 Hz ÷ 120 Hz
- Max SPL: 131 dB
- Woofer: 15“, 3.0" v.c.
Input/Output Section
- Input connectors: Stereo XLR
- Output connectors: Stereo XLR
- Input sensitivity: -2 dBu / + 4 dBu
Processor Section
- Crossover frequencies: 80-110 Hz Hz
- Protections: thermal, rms
- Limiter: soft limiter
- Controls: Volume, EQ, phase, xover
Amplifier Specifications
- Total power: 1400 W PEAK
- Low frequencies: 1400 W PEAK
- Total power: 700 W RMS
- Low frequencies: 700 W RMS
- Cooling: convection
- Connections: VDE connector
Cabinet
- Cabinet Material: Baltic birch plywood
- Hardware: Pole mount
- Handles: 2 side
- Pole Mount/Cap: yes
- Grille: Steel
- Colour: Black
Physical Specifications
- Height: 568/22.36 mm/inch
- Width: 430/16.93 mm/inch
- Depth: 595/23.43 mm/inch
- Net Weight: 28.0/50.70 kg/lbs
The data are not binding; RCF reserves the right to modify the data at any time and without previous notice. |
Reviews
There are no reviews yet.