| Content |
24 AWG stranded (7x32) TC conductor, polyolefin insulation, individually shielded Beldfoil?
(100% coverage) numbered/color-coded PVC jackets, jackets and shields bonded to strip
simultaneously, overall Beldfoil shield and 24 AWG TC drain wire.
PHYSICAL CHARACTERISTICS :
CONDUCTOR :
Number of Pairs: 8
Total Number of Conductors: 16
AWG: 24
Stranding: 7x32
Conductor Diameter: .024 in.
Conductor Material: TC - Tinned Copper
INSULATION :
Insulation Material: PO - Polyolefin
Nom. Insulation Wall Thickness: .008 in.
Insulation Diameter: .040 in.
Lay Length: 1.75 in.
Twists/ft.: 6.85
Pair Color Code Chart: Red & Black
INNER SHIELD :
Inner Shield Material Trade Name: Beldfoil?
Inner Shield Type: Tape
Inner Shield Material: Aluminum Foil-Polyester Tape
Inner Shield % Coverage: 100 %
Inner Shield Drain Wire AWG: 24
Inner Shield Drain Wire Stranding: 7x32
Inner Shield Drain Wire Conductor Material: TC - Tinned Copper
INNER JACKET :
Inner Jacket Material: PVC - Polyvinyl Chloride
Inner Jacket Nominal Wall Thickness: .014 in.
Inner Jacket Diameter: .111 in.
OVERALL CABLING : Overall Cabling Color Code Chart:
Number Color
1 Brown
2 Red
3 Orange
4 Yellow
5 Green
6 Blue
7 Purple
8 Gray
OUTER SHIELD :
Outer Shield Material Trade Name: Beldfoil?
Outer Shield Type: Tape
Outer Shield Material: Aluminum Foil-Polyester Tape
Outer Shield %Coverage: 100 %
OUTER SHIELD DRAIN WIRE :
Outer Shield Drain Wire AWG: 18
Outer Shield Drain Wire Stranding: 7x26
Outer Shield Drain Wire Conductor Material: TC - Tinned Copper
OUTER JACKET :
Outer Jacket Material: PVC - Polyvinyl Chloride
Outer Jacket Nominal Wall Thickness: .033 in.
Outer Jacket Ripcord: Yes
OVERALL NOMINAL DIAMETER :
Overall Nominal Diameter: .452 in.
MECHANICAL CHARACTERISTICS :
Operating Temperature Range: -35°C To +75°C
Bulk Cable Weight: 103.5 lbs/1000 ft.
Max. Recommended Pulling Tension: 152 lbs.
Min. Bend Radius (Install): 4.5 in.
APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE :
APPLICABLE STANDARDS :
NEC/(UL) Specification: CM
CEC/C(UL) Specification: CM
EU CE Mark (Y/N): Yes
EU RoHS Compliant (Y/N): Yes
EU RoHS Compliance Date (mm/dd/yyyy):: 01/01/2004
PLENUM/NON-PLENUM :
Plenum (Y/N): N
ELECTRICAL CHARACTERISTICS :
Nom. Inductance: .18 ?H/ft
Nom. Capacitance Conductor to Conductor @ 1 KHz: 31 pF/ft
Nom. Cap. Cond. to Other Cond. & Shield @ 1 KHz: 58 pF/ft
Nominal Velocity of Propagation: 66 %
Nom. Conductor DC Resistance @ 20 Deg. C: 23.3 Ω/1000 ft
Ind. Pair Nominal Shield DC Resistance @ 20 Deg. C: 15.9 Ω/1000 ft
Max. Operating Voltage - UL: 300 V RMS
Max. Recommended Current: 1.05 Amps per conductor @ 25°C
NOTE:Price per meter
| A P P L I C A T I O N
Analogue audio
Fixed installations
Audio transmissions in noisy environment
Wiring in professional sound studios
P R O D U C T A D V A N T A G E S
Very good protection against electromagnetique interferences
thanks to individually shielded pairs and overall shield
T E C H N I C A L D A T A
NO. OF CONDUCTORS: No. x 2 x 0,22 mm2 Tinned copper
CONDUCTOR INSULATION: PE
SHIELDING BY PAIR: Aluminium polyester foil + drain wire
COLOR OF CONDUCTEUR: White / blue
COLOR OF PAIR: By number
OVERALLSHIELD: Aluminium polyester foil + drain wire
JACKET: Black PVC
PACKAGING: Per m
SUITABLE PLUG: XLR, jacks
PRICE PER METER | Is exactly the cable all "bending radius fetishists", such as live technicians, musicians, and ambitious live sound people have been dreaming of! The QUANTUM is absolutely torsion-free, i.e. it can be wound in the shape of an "8" without any problems and will not twist when it is wound or unwound. Not only the S-PVC-jacket, resistant to a temperature of -30 °C and notchresistant, feels soft but the inside as well, and is also break-resistant due to the super fine 0.07 mm (!) individual copper litz and the PE-insulated wire insulation. The electrical and mechanical data also is remarkable: each wire pair is additionally insulated with a sleeve, numbered, and shielded with a copper spiral covered to 99 %. Get a taste of this: The QUANTUM stands out with a low capacity of 45 pF wire/wire and remains 110 Ohms (AES/EBU) conform for hundreds of meters! The wire pair diameter is perfectly suitable for direct installation (e.g. a XLRconnector). The inside is protected against adverse influences by a highly flexible PVC-jacket with a wall thickness of almost 2 mm. There never has been a cable with the same electrical and mechanical values atsuch a low price!
Center conductor cross section
0.14 mm²
Center conductor material
copper
Center conductor construction
36 x 0.07 mm
Number of internal conductors
16
Line resistance
<90 Ohm(s)
Additional information
Inner conductors shielded in pairs, AES/EBU-compliant
| Adam Hall Cables 4 STAR HPD 315 Hybrid Cable Power & DMX 3 x 1.5 mm² & 2 x 0.22 mm². Price per meter
General
Type
Power / Signal Cable
Temperature range
-20 - 70 °C
Power
Number of internal conductors
3
Center conductor cross section
1.5 mm²
Center conductor construction
48 x 0.20 mm
Center conductor material
OFC
Conductor resistance
85 ohm/km
DMX
Number of inner conductors 2
2
Center conductor cross section 2
0.22 mm²
Center conductor construction 2
7 x 0.20 mm
Center conductor material 2
OFC
Shield
AL/PT-foil, Copper spiral coil shield
Conductor resistance 2
85 ohm/km
| Adam Hall Cables 4 STAR HPA 325 Hybrid Cable Power & Audio 3 x 2.5 mm² & 2 x 0.22 mm². Price per meter
General
Type
Power / Signal Cable
Temperature range
-20 - 70 °C
Power
Number of internal conductors
3
Center conductor cross section
2.5 mm²
Center conductor construction
96 x 0.10 mm
Center conductor material
OFC
Audio
Number of inner conductors 2
2
Center conductor cross section 2
0.22 mm²
Center conductor construction 2
28 x 0.10 mm
Center conductor material 2
OFC
Conductor resistance 2
55 ohm/km
|
A P P L I C A T I O N
Analogue audio
Fixed installations
Audio transmissions in noisy environment
Wiring in professional sound studios
P R O D U C T A D V A N T A G E S
Very good protection against electromagnetique interferences
thanks to individually shielded pairs and overall shield
T E C H N I C A L D A T A
NO. OF CONDUCTORS: No. x 2 x 0,22 mm2 Tinned copper
CONDUCTOR INSULATION: PE
SHIELDING BY PAIR: Aluminium polyester foil + drain wire
COLOR OF CONDUCTEUR: White / blue
COLOR OF PAIR: By number
OVERALLSHIELD: Aluminium polyester foil + drain wire
JACKET: Black PVC
PACKAGING: Per m
SUITABLE PLUG: XLR, jacks PRICE PER METER ![mpai_info]( "mpai_info")
|
Reviews
There are no reviews yet.