| Content | DT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise.
The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone.
▲ Closed headphone
▲ Excellent ambient noise attenuation (35 dBA)
▲ Superb sound quality with high sound pressure level (105 dB)
▲ Extended frequency range
▲ Single-sided cable with volume control
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Excellent comfort for long-term wearing, softskin ear pads
▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding
▲ Single-sided cable
▲ Supplied in a carrying case (nylon)
| Transmission type |
|
Wired |
| Headphone design (operating principle) |
|
Closed |
| Headphone impedance |
|
80 ohms |
| Headphone frequency response
The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones. |
|
5 - 30.000 Hz |
| Nominal sound pressure level
The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume. |
|
105 dB |
| Construction |
|
Circumaural (around the ear) |
| Cable & plug |
|
Straight connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
| Net weight without packaging |
|
300 g |
| K 701
* Revolutionary flat-wire voice coil technology
* Patented AKG Varimotion ultra-precision two-layer diaphragm
* Self-adjusting cushioned genuine-leather headband
* Bi-wiring, high-performance cable with 1/4" jack plug
* Comfortable, specially shaped "3D-Form" ear pads
* Complete with stylish storage cradle
* Individually tested and numbered
Whether you prefer the holistic approach or like to listen analytically, the K 701
will turn perception into pure enjoyment.
AKG is the first manufacturer in the world to use revolutionary flat-wire technology
in headphones, namely, the K 701. The result is a truly dramatic sound that places
every musician at their correct location with pinpoint accuracy. This kind of agility,
spaciousness, brilliant highs, and velvety, punchy bass is simply miraculous.These
superlative open-back dynamic headphones provide an outstandingly accurate sound
and excellent imaging. Try the K 701 and find out what ingenious headphone engineering
can do for you.
SPECIFICATIONS:
Type Open-back, dynamic headphones
Efficiency 105 dB/V
Frequency range 10 Hz to 39.8 kHz
Rated impedance 62 ohms
Max. input power 200 mW
Cable bi-wiring, single-sided, 99.99% oxygen-free cable, 3 m (10 ft.)
Connector 1/4" hard gold plated | With enhanced audio clarity and sound isolation, the ATH-M30x professional monitor headphones are tuned for highly detailed audio. Featuring strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced detail, with excellent mid-range definition
- Circumaural design contours around the ears for excellent sound isolation in loud environments
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: CCAW (Copper-clad aluminum wire)
- Frequency Response: 15 - 22,000 Hz
- Max Input Power: 1,300 mW @ 1KHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Folding/collapsible: Yes
- Weight: (Without cable) 7.8 oz (220 g)
- Cable - Detachable: No
- Cable: 3 m (9.84') Straight cable, left-side exit
- Connector: Gold-plated stereo 1/8" (3.5 mm) connector with strain relief
- Accessories included: Screw-on 1/4" adapter, pouch
| The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 - 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 190 g (6.7 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessory Included: 6.3 mm (1/4“) snap-on adapter
| Whether you\'re mixing, monitoring or just enjoying an MP3, you want your headphones to deliver a wide frequency response and high dynamic range. The HPS3000 headphones provide incredible performance for a price well within any budget
The HPS3000 provides everything you need for comfortable listening. The oval-shaped ear cups contain high-resolution cobalt capsules that deliver every nuance of your sound. The one-sided cable is engineered from the finest oxygen-free copper wire that resists tangling and provides maximum durability. It also comes with a 1/4" TRS adapter for the 1/8" TRS connector, making it compatible with everything from your MP3 player to your mixing console.
FEATURES
- Ultra-wide frequency response
- High-definition bass and super-transparent highs
- Ultra-wide dynamic range
- High-efficiency cobalt capsule
- 1/8" Connector plus 1/4" adapter included
- Single-sided cord with oxygen-free copper wires
- Optimized oval-shaped ear cups
SPECIFICATIONS
HPS3000 High-Performance Studio Headphones
- Capsule diameter: 40 mm
- Frequency response: 20Hz-20kHz
- Max. power handling: 100 mW
- Impedance: 64 Ohm
- Sensitivity: 110dB@1kHz
- Cord length: 2.0 m
- Connector: 1/8" TRS connector plus 1/4" TRS adapter
| Beyerdynamic DT 150
The DT 150 is a dynamic studio headphone for use in broadcasting, film and recording studios
and other audio monitoring applications where size, comfort and performance are primarily requirements.
Due to its closed design it features excellent ambient noise isolation for reference monitoring.
- Transducer type: Dynamic
- Operating principle: Closed
- Frequency response: 5 - 30,000 Hz
- Nominal impedance: 250 Ω
- Nominal SPL: 97 dB
- Power handling capacity: 100 mW
- Sound coupling to the ear: Circumaural
- Headband pressure: 4.5 N
- Ambient noise attenuation: approx. 20 dBA
- Weight (without cable): 250 g
|
Reviews
There are no reviews yet.