Blue Hummingbird CONDENSER MIC

PREMIUM SOUND. HEAD-TURNING PERFORMANCE
Hummingbird is a versatile, precision-engineered Class A small-diaphragm microphone that unlocks the tonal nuances of your instruments so you can capture the best recordings possible.With a 180 degree rotating head, Hummingbird fits into tight spaces and can nimbly change positions where others canʼt.

Featuring a precisely tuned diaphragm based on the acclaimed B1 capsule from Blueʼs flagship Bottle microphone, Hummingbird is ultra-responsive and delivers extended frequency response. Hummingbird is the perfect studio and stage solution for drum overheads, acoustic guitar, piano, percussion, or any other instrument with fast transients and rich overtones.

• Adjustable small-diaphragm condenser microphone with rotating head

• 180° rotating head for precise mic placement

• Cardioid condenser based on the B1 capsule from the heralded Blue Bottle

• Exceptional sonic accuracy and extended frequency response

• Ultra-fast transient response and high-SPL handling in the studio and on stage

MIC PLACEMENT IS EVERYTHING
Discover new tonal colors of your instrument by simply rotating Hummingbirdʼs head. The unique 180° pivoting head allows you to place the mic at any angle—without having to adjust the mic stand—and capture the sound most mics would leave behind. Give Hummingbird a turn, and take your recordings from good to great.

• Sweep the capsule between the 12th fret and sound hole of an acoustic guitar to dial in the  perfect guitar sound, all without having to get up out of your chair.

• Rotate the capsule between the edge of the snare drum and the center of the drumhead to get the perfect snare sound, all without having to adjust the mic stand.

•  Pivot the heads of a pair of Hummingbird overheads to dial in the perfect stereo image over a set of drums, percussion, or upright piano

PREMIUM BLUE CAPSULE
Hummingbird boasts a premium capsule based on the Blue B1—part of our acclaimed interchangeable Bottle Caps series. Hummingbirdʼs precisely tuned cardioid capsule is ultraresponsive and provides extended high-frequency response—making it perfect for recording any instrument with quick attacks and rich tonal characteristics.

TAKE YOUR SOUND TO NEW HEIGHTS
The superb dynamic range, balanced character and sparkling high end of the Hummingbird is perfect for reproducing the sharp attacks and tonal characteristics of a wide range of instruments including drums, acoustic guitars, strings and world instruments. And with no ICʼs in the signal path, Hummingbird delivers maximum sonic detail with the lowest possible noise floor. With excellent off-axis rejection, Hummingbird is the perfect choice for close-miking drums or percussion while minimizing sound from surrounding instruments.

DRUMS—FROM A BIRDʼS EYE VIEW
The Hummingbirdʼs agility, sonic precision, and ability to handle high sound pressure levels make it an ideal mic for recording drums. With a 180° pivoting head, Hummingbird makes it easier to get great overhead sounds, and it can fit into tight snare drum or rack tom spaces and get the perfect angle on the drumheads—a difficult task with other condenser microphones.Technical specifications :

•  Transducer Type: Condenser, Pressure Gradient

•  Polar Pattern: Cardioid

•  Frequency Response: 20Hz - 20kHz

•  Sensitivity: 15mV/Pa @ 1kHz (1 Pa = 94dB SPL)

•  Output Impedance: 50Ω

•  Rated Load Impedance: Not less than 1kΩ

•  Maximum SPL: 130 dB SPL

•  S/N Ratio: 85.5 dB-A (IEC 651)

•  Noise Level A-Weighted: 8.5 dB-A (IEC 651)

•  Dynamic Range: 129.5 dB (2.5kΩ)

•  Power Requirement: +48V DC Phantom Power (IEC 268-15)

•  Weight: 212g (7.5oz)

•  Dimensions: 170mm x 27mm x 27mm (6.7” x 1.1” x 1.1”)

Included Accessories

•  Rigid carry case with foam lining

•  Mic clip

•  Foam wind-screen

The ME 62 is an omni-directional microphone head suitable for K6 and K6P
powering modules. It can be used for reporting, discussions and interviews.
The ME 62 is particularly suitable for good reproduction of 'room' ambience
and 'spaced omni' stereo recording. Matt black, anodised, scratch-resistant finish.

Features
Omni-directional pick-up pattern
Minimal inherent self-noise
Excellent rejection of rumble, wind and handling noise
Wide frequency response
High maximum sound pressure level
Integral pop filter
Delivery Includes
1 ME 62

Technical Data
Pick-up pattern  omni 
Sensitivity in free field, no load (1kHz)  31 mV/Pa +- 2,5 dB 
Nominal impedance  200 Ohm (K6) 
Min. terminating impedance  1000 Ohm (K6) 
Equivalent noise level  15 dB 
Equivalent noise level weighted as per CCIR 468-3  27 dB 
Dimensions  d 22,5 x 94 mm 
Weight  30 g 

The ME 65 is a super-cardioid microphone head designed for use with the K6 and K6P powering modules. It is especially suited to vocal and speech applications. Matt black, anodised, scratch-resistant finish.

• Pick-up pattern : super-cardioid
• Sensitivity in free field, no load (1kHz) : 10 mV/Pa +- 2,5 dB
• Nominal impedance : 200 Ohm (K6)
• Min. terminating impedance : 1000 Ohm (K6)
• Equivalent noise level : 20 dB
• Dimensions : d 44 x 131 mm
• Weight :

The ME 67 is a long gun microphone head designed for use with the K6 and K6P powering modules. A highly directional microphone, it can be used where the microphone must be placed at a distance from the sound source. Matt black, anodised, scratch-resistant finish.

Pick-up pattern : lobar
Sensitivity in free field, no load (1kHz) : 50 mV/Pa +- 2,5 dB
Nominal impedance : 200 Ohm (K6)
Min. terminating impedance : 1000 Ohm (K6)
Equivalent noise level : 10 dB
Dimensions : d 22,5 x 343 mm
Weight : 100 g