| Content |
Where installations require a simple hardware controller, the 9012 provides an instant solution for volume and source select functions (for example). The 9012 is equipped with a rotary fader and a five-position switch, connecting to the control port inputs on the rear of a Soundweb 9088 or 9000 device. These controls may be mapped in Soundweb Designer to utilise other functions.
The 9012 is provided along with a set of multi-purpose lables, in four languages - English, French, German, and Spanish.
The 9012 is also available in a US-style single-gang light switch fitting, finished in beige to match many types of decor.
|
| | - IT CAN CHECK SPEAKER WIRE OPEN, SHORT, AND EXCEED VALUE ACCORDING TO SETTING UP IMPEDANCE. - IT AUTOMATICALLY CHECKS SPEAKER WIRES BY PROGRAM TIMER OPERATIONS. THE POSSIBLE SET UP TIMES ARE BETWEEN 20 MINUTES AND 200 MINUTES. - RS-232C TERMINAL IN/OUT CONTROL WITH AMX/CRESTRON INTERFACE. - DC 24V OPERATION. - COMPACT DESIGN 2RU(3.5”). - KEEPS STORED VALUES BY NON VOLATILE MEMORY - ALERT SOUNDS WHEN FAULT IS FOUND - BUZZER ON/OFF FUNCTION. | | | | | | SC - 624 | | Power source | 24VDC | | Power Consumption | 300mA | | Weight | 5.2Kg / 11.5lb | | Dimensions (WxHxD) | 1482 x 88 x380mm /19 x 3.5 x 15in | | | |
| RM-200M - Five/ten zone console for VM-2120/2240 amplfiers
The RM-200M Remote Microphone that allows announcements to be made to any speaker zone and emergency announcements to all zones on a system with the VM-2120/2240 system management amplifiers.
These announcements can be made live or pre-recorded announcements
can be activated. The remote microphone is connected by cable to the
RM-210 Remote Microphone Extension unit.
SPECIFICATIONS:
| Power Requirement |
24 V DC (12-30 V DC), (Supplied from VM-2120/VM-2240 Amplifier or local power suppy.) |
| Distortion |
Less than 1% |
| Frequency Response |
100 - 10,000 Hz |
| Distortion |
Less than 1% |
| Signal-to-Noise Ratio |
More than 60 dB |
| Audio Output |
0 dB*1, 600 O, balanced |
| Microphone |
Unidirectional electret condenser microphone, gooseneck type. |
| Speaker Zone Control |
Zones 1-5 (Zones 1-10 with 2 stacked amplifiers) Groups 1-2, and All-Zone Broadcast |
| Emergency Broadcast |
Activation of Emergency Broadcast (pre-recorded announcement*2 or live microphone announcement) by Emergency Switch |
| Voice Announcement Board Control |
Activation of 5 messages*2 |
| Number of Connectable Units |
Up to 4 |
| Communication System |
RS-485 |
| Volume Control |
Microphone volume control |
| Connection Cable and Connector Category |
5 STP cable, RJ45 connector |
| Communication Distance |
800 m maximum in total |
| Finish |
ABS resin |
| Dimensions |
190 (W) × 75.7 (H) × 21.5 (D) mm (Gooseneck microphone excluded) |
|
*1 0 dB = 1 V
*2 An optional EV-200 Board must be mounted in the VM-2120 or VM-2240 Amplifier. |
|
The PT-9107SD from Inter-M Americas is a high-quality, single rack space digital AM/FM tuner ideal for use in restaurants, retail, offices, and more. It offers both mono and stereo outputs for compatibility with a variety of sound systems. A front-panel display shows information for channel, band, memory, and tuning. Up to twenty stations may be pre-set so your favorites are never more than a click away.
The tuner has a Digi-Link function for remote control. AC and DC power inputs are provided so that emergency 24VDC power may be connected if needed. The PT-9107SD is a great choice for applications needing a high-quality, easy-to-use rack-mountable tuner.
• Single rack space AM/FM tuner • Stereo and mono outputs • Fixed and variable outputs • Front-panel display screen • Stores up to 20 presets • Digi-Link function for remote control • Auto scan SPECIFICATIONS:
Tuning RangeFM: 87.5 - 108MHz
AM: 522 - 1611kHz SensibilityFM: Less than 3uV
AM: Less than 100uV Signal to Noise RatioFM: Greater than 65dB
AM: Greater than 40dB Total Harmonic Distortion (THD)FM: 0.3%
AM: 1% Output LevelFM Mono Balanced: 1V
FM Stereo Balanced: 500mV
AM Mono Balanced: 240mV Controls1 x Power Switch
1 x Memory Button
1 x Preset Button
1 x Mode Preset/Tune Button
10 x Preset Recall Buttons
1 x Volume Control Knob
1 x Mono/Stereo Button
1 x AM Selector Button
1 x FM Selector Button
1 x Up Button
1 x Down Button
1 x Reset Button (Rear Panel) Connectors1 x AC Power In
1 x DC Power In
1 x Fixed Output Connector
1 x Mono Variable Output Connector
1 x Stereo Variable Output Connector
1 x AM Antenna Connector
1 x FM Antenna Connector
1 x Digi-Link Connector Power Source100/120/230/240VAC, 50/60HZ
24VDC Power Consumption11W Dimensions (WxHxD)19 x 1.75 x 11" (483 x 44 x 280 mm) Weight7.7 lbs (3.5 kg)
|
Volume Control 12W with priority.
|
| | - CONVENIENT INSTALLATION AND CONSTRUCTION WITHOUT NEED OF ID SETTING. - SELECTION OF VARIOUS CHIME BROADCASTINGS FOR MIC BROADCASTING (PRE/POST). - CONVENIENT PRIORITY BROADCASTING. - ADOPTION OF OUTPUT SIGNAL LEVEL DISPLAY. - ADOPTION OF RS-422 COMMUNICATION METHOD TO SUPPORT A LONG DISTANCE. | | | | | | | | Audio Output | 0dB(Balanced) | | Audio Input | Paging & RM MIC & LM MIC | -50dB(Balanced) | | BGM(Main & Local) | -10dB(Balanced) | | Tone Control (100Hz & 10kHz) | Paging MIC | ± 10dB | | Audio Output | ± 12dB | | Frequency Response | BGM | ± 3dB | | MIC | ± 3dB | | S / N | BGM | Better than 75dB | | MIC | Batter than 65dB | | T.H.D. | BGM | Less than 0.05% | | MIC | Less than 0.05% | | Priority Control | Paging MIC > DRP > RM1> RM2 > RM3 > RM4 > LM-8000 > Main BGM | | Phantom Power | DC 24V | | Serial Interface | Communication Speed | 9600bps | | Communication Distance | Maximum 300m(UTP CAT%) | | Operation Temperature | -10℃ ~ +40℃ | | Power Source | 100-120VAC or 220-240VAC; 50/60Hz (Supplied AC mains transformer depends on country requirements) | | Weight(SET) | 1.5kg / 3.2lb | | Dimensions(SET) | 200(W) x 70(H) x 206(D)mm 7.9(W) x 2.8(H) x 8.1(D)in | | ※ Specifications and design subject to change without notice. | | | |
|
€ 
£ 
$ 
kr. 
kr 
kr 
CHF 
лв. 
рсд 
zł 
Ft 
lei 
Kč 
ден 
L 
Reviews
There are no reviews yet.