A P P L I C A T I O N Digital AES/EBU audio application on important lengths and DMX signal Any digital audioconnection as well in fixed installation as on stage P R O D U C T A D V A N T A G E S Very good shielding against electrical interferences […]
A P P L I C A T I O N
Digital AES/EBU audio application on important lengths
and DMX signal
Any digital audioconnection as well in fixed installation as on stage
P R O D U C T A D V A N T A G E S
Very good shielding against electrical interferences
High flexibility and easy to wind due to the flexible PVC jacket
T E C H N I C A L D A T A
NO. OF CONDUCTORS: No. x 2 x 0,22 mm2 Bare copper
COMPOSITION: 7 x 0,20 mm
CONDUCTOR INSULATION: Cellular PE
SHIELDING BY PAIR: Bare copper spiral
COLOR OF PAIR: White – blue
JACKET: Blue PVC
PACKAGING: Per m
SUITABLE PLUG: XLR
E L E C T R I C A L D A T A
IMPEDANCE: 110 Ohm +/- 10
CAPACITANCE 800 / 1000 Hz: 46 pF/m
DAMPING: 1 MHz 2,10 dB / 100 m
10 MHz 10,50 dB / 100 m
20 MHz 16,00 dB / 100 m
| Weight | 0.15 kg |
|---|
 TC conductor, polyolefin insulation, individually shielded Beldfoil? <br>(100% coverage) numbered/color-coded PVC jackets, jackets and shields bonded to strip <br>simultaneously, overall Beldfoil shield and 24 AWG TC drain wire. <br> <br> <br>PHYSICAL CHARACTERISTICS : </p>
<p>CONDUCTOR : <br>Number of Pairs: 24 <br>Total Number of Conductors: 48 <br>AWG: 24 <br>Stranding: 7x32 <br>Conductor Diameter: .024 in. <br>Conductor Material: TC - Tinned Copper <br> <br>INSULATION : <br>Insulation Material: PO - Polyolefin <br>Nom. Insulation Wall Thickness: .008 in. <br>Insulation Diameter: .040 in. <br>Lay Length: 1.75 in. <br>Twists/ft.: 6.85 <br>Pair Color Code Chart: Red and Black <br> <br>INNER SHIELD : <br>Inner Shield Material Trade Name: Beldfoil? <br>Inner Shield Type: Tape <br>Inner Shield Material: Aluminum Foil-Polyester Tape <br>Inner Shield % Coverage: 100 % <br>Inner Shield Drain Wire AWG: 24 <br>Inner Shield Drain Wire Stranding: 7x32 <br>Inner Shield Drain Wire Conductor Material: TC - Tinned Copper <br> <br>INNER JACKET : <br>Inner Jacket Material: PVC - Polyvinyl Chloride <br>Inner Jacket Nominal Wall Thickness: .014 in. <br>Inner Jacket Diameter: .111 in. <br>Inner Jacket Color Code Chart: <br> <br>Number Color <br>1 Brown <br>2 Red <br>3 Orange <br>4 Yellow <br>5 Green <br>6 Blue <br>7 Purple <br>8 Gray <br>9 White <br>10 Black <br>11 Tan <br>12 Pink <br>13 Gray/Brown <br>Number Color <br>14 Gray/Red <br>15 Gray/Orange <br>16 Gray/Yellow <br>17 Gray/Green <br>18 Gray/Blue <br>19 Gray/Purple <br>20 Gray/Gray <br>21 Gray/White <br>22 Gray/Black <br>23 Gray/Tan <br>24 Gray/Pink <br> <br>OUTER SHIELD : <br>Outer Shield Material Trade Name: Beldfoil? <br>Outer Shield Type: Tape <br>Outer Shield Material: Aluminum Foil-Polyester Tape <br>Outer Shield %Coverage: 100 % <br> <br>OUTER SHIELD DRAIN WIRE : <br>Outer Shield Drain Wire AWG: 18 <br>Outer Shield Drain Wire Stranding: 7x26 <br>Outer Shield Drain Wire Conductor Material: TC - Tinned Copper <br> <br>OUTER JACKET : <br>Outer Jacket Material: PVC - Polyvinyl Chloride <br>Outer Jacket Nominal Wall Thickness: .065 in. <br>Outer Jacket Ripcord: Yes <br> <br>OVERALL NOMINAL DIAMETER : <br>Overall Nominal Diameter: .807 in. <br>MECHANICAL CHARACTERISTICS : <br> <br>Operating Temperature Range: -35°C To +75°C <br>Bulk Cable Weight: 263.5 lbs/1000 ft. <br>Max. Recommended Pulling Tension: 418.4 lbs. <br>Min. Bend Radius (Install): 8 in. </p>
<p>APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE : <br> <br>APPLICABLE STANDARDS : <br>NEC/(UL) Specification: CM <br>CEC/C(UL) Specification: CM <br>EU CE Mark (Y/N): Yes <br>EU RoHS Compliant (Y/N): Yes <br>EU RoHS Compliance Date (mm/dd/yyyy):: 01/01/2004 <br> <br>PLENUM/NON-PLENUM : <br>Plenum (Y/N): N </p>
<p>ELECTRICAL CHARACTERISTICS : <br>Nom. Characteristic Impedance: 50 Ω <br>Nom. Inductance: .18 ?H/ft <br>Nom. Capacitance Conductor to Conductor @ 1 KHz: 31 pF/ft <br>Nom. Cap. Cond. to Other Cond. & Shield @ 1 KHz: 58 pF/ft <br>Nominal Velocity of Propagation: 66 % <br>Nom. Conductor DC Resistance @ 20 Deg. C: 23.3 Ω/1000 ft <br>Ind. Pair Nominal Shield DC Resistance @ 20 Deg. C: 15.9 Ω/1000 ft <br>Max. Operating Voltage - UL: 300 V RMS <br>Max. Recommended Current: 1.05 Amps per conductor @ 25°C <br> <br> <br>NOTE:Price per meter <br> </p></td><td>
<p>
A P P L I C A T I O N<br>
Analogue audio<br>
Any analogue audio transmissions as well in fixed installations as on stage<br>
or broadcast<br>
These highly flexible multi-pairs are destined to mobile applications<br>
P R O D U C T A D V A N T A G E S<br>
High flexibility<br>
Transmission on important lengths due to 0,22 mm2<br>
Facility of wiring thanks to conductors cross section colored<br>
and numbered pairs<br>
T E C H N I C A L D A T A<br>
NO. OF CONDUCTORS: No. x 2 x 0,22 mm2 Bare copper<br>
COMPOSITION: 28 x 0,10 mm<br>
CONDUCTOR INSULATION: Polyolefin<br>
SHIELDING BY PAIR: Bare copper spiral<br>
COLOR OF PAIR: See board<br>
JACKET: Black PVC<br>
PACKAGING: Per m<br>
SUITABLE PLUG: XLR, jack, cinch
</p>
<p>
PRICE PER METER
</p>
<p>
</p></td><td>Adam Hall by Procab - power and audio cable Ø 14 mm
The PAC50 is a high quality signal and power cable in one jacket. This kind of cable is designed to fulfill all demands when using active loudspeakers. The cable consists of a power cable and a balanced signal cable. A general outer jacket with an O.D. of 14 mm and made of flexible PVC protects each inner cable against abrasion. The inner power cable contains 3 conductors with a section of 1.0 mm², protected by a PVC jacket with an O.D of 7 mm.
The signal section is balanced and contains two twisted inner conductors of 0.125 mm² with an excellent shielding to prevent any influence of hum, noise, radio interference and magnetic fields.
The signal section is also protected by an outer jacket of PVC with an O.D. of 3.5 mm. The PAC50 cable finds its application in mobile systems where power and signal are desired to be in one cable (active speaker systems).
TECHNICAL DATA:
<ul>
<li>Art No.: KCPAC50</li>
<li>Type of cable: Signal cable</li>
<li>Containing: Power cable & audio cable</li>
<li>Cover: cotton paper</li>
<li>Outer jacket: Flexible PVC</li>
<li>Outer jacket color: Black</li>
<li>Outer jacket dimensions: Ø 14 mm</li>
<li>Printing color: white</li>
<li>Printing text: Procab PAC50</li>
<li>Type of packing: wooden reel for 100 meter</li>
</ul>
MECHANICAL DATA:
<ul>
<li>Temperature range fixed installation:
<ul>
<li>Fixed installation: -40° C to +80° C</li>
<li>Flexible installation: -25° C to +70° C</li>
</ul>
</li>
<li>Bending radius :
<ul>
<li>Fixed installation: 8 x outer diameter</li>
<li>Flexible installation: 10 x outer diameter</li>
</ul>
</li>
</ul>
AUDIO CABLE:
<ul>
<li>Type of cable: Signal cable</li>
<li>Inner conductor: 2 x TC 7 x 0.15 mm</li>
<li>Inner conductor section: 2 x 0.125 mm²</li>
<li>Conductor twisting: Yes</li>
<li>Isolation: PE , Ø 1,5 mm</li>
<li>Shielding: TC 32 x 0.12 mm, spiral</li>
<li>Shielding %: 100%</li>
<li>Outer jacket: Flexible PVC</li>
<li>Outer jacket color: grey</li>
<li>Outer jacket dimensions: Ø 3,5 mm</li>
<li>Lead resistance: 13.75 ohm - 100 meter</li>
<li>Cable cross-talk: Min. 73.3 dB - 100 meter</li>
<li>Capacitance lead to lead: 54 pF - meter 1 kHz</li>
<li>Capacitance lead to Shielding: 98 pF - meter 1 kHz</li>
</ul>
POWER CABLE:
<ul>
<li>Type of cable: Power cable</li>
<li>Inner conductor: 3 x BC 58 x 0,15 mm</li>
<li>Inner conductor section: 3 x 1 mm²</li>
<li>Inner conductor color: green 6 yellow - blue - brown</li>
<li>Outer jacket: Flexible PVC</li>
<li>Outer jacket color: black</li>
<li>Outer jacket dimensions: Ø 7 mm</li>
<li>Lead resistance: 1.35 ohm - 100 meter</li>
<li>Max. operation voltage: 450 Volt</li>
<li>Max current: 10 amp</li>
<li>Approval: CE</li>
</ul></td><td>
<p> A P P L I C A T I O N<br /> Analogue audio<br /> Any analogue audio transmissions as well in fixed installations as on stage<br /> or broadcast<br /> These highly flexible multi-pairs are destined to mobile applications<br /> P R O D U C T A D V A N T A G E S<br /> High flexibility<br /> Transmission on important lengths due to 0,22 mm2<br /> Facility of wiring thanks to conductors cross section colored<br /> and numbered pairs<br /> T E C H N I C A L D A T A<br /> NO. OF CONDUCTORS: No. x 2 x 0,22 mm2 Bare copper<br /> COMPOSITION: 28 x 0,10 mm<br /> CONDUCTOR INSULATION: Polyolefin<br /> SHIELDING BY PAIR: Bare copper spiral<br /> COLOR OF PAIR: See board<br /> JACKET: Black PVC<br /> PACKAGING: Per m<br /> SUITABLE PLUG: XLR, jack, cinch </p> <p> PRICE PER METER </p> <p> <img border= "digi_info")
Reviews
There are no reviews yet.