| Content | The DacMagic XS USB DAC/headphone amp is an instant upgrade to any computerʼs sound output. It connects quickly and easily to any USB port and allows you to hear your favourite music and movies with every drop of detail, exactly as the artist intended.
Small but mighty
The DacMagic XSs built-in headphone amp puts out 150mW of serious power, for the bass and volume you need even in the noisiest environments. Now you can enjoy perfect sound from your laptop wherever you are. Watch the video opposite for more information.
More power
The built-in headphone amp increases the punch of your headphones, delivering 10 times more power than most laptop soundcards can manage. Even in the noisiest environments you will hear more of your music and wonʼt have to worry about the buzz of background noise.
The DacMagic XS features a volume control, easily adjusted at the tap of a finger. Whatʼs more, an LED shows current sample rate, so you always know if you\'re getting the right level of detail.
Highly Portable
The high quality brushed aluminium case weighs a mere 100g, so this tiny powerhouse can come anywhere with you.
Features
-
- High quality 24-bit DAC
- Analogue volume control
- LED sample rate indicator
- Micro USB cable included
Connections Micro USB input, 3.5mm analogue output
Digital to analogue converter ESS9023 24-bit DAC
Sample rates supported USB 1.0 mode: 16/24-bit, 44.1kHz, 48kHz, 88.2kHz, 96kHz
USB 2.0 mode: 16/24-bit, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Output voltage 2V RMS
Max. power consumption 150mW
Min. headphone impedance 12 Ohms
Frequency response +/-0.2dB 20Hz – 20kHz
THD (unweighted) |
The new Fostex HP-A3 is the perfect DAC for Computer Audio. This high quality unit features 32bit D/A Conversion with an integrated headphone amplifier exclusively designed to get the most from and PC audio set-up.
Why settle for 'built-in' D/A conversion when you can drastically improve the quality of your audio with a Fostex HP-A3?
32bit D/A Converter USB Bus power without using unwanted AC adapterWorks with up to 24bit/96kHz audio sourceHigh quality analog headphone amp to drive any type of headphonesEquipped with high-grade AKM 32bit DAC AK4390 - USB Bus power without using unwanted AC adapter
- Works with up to 24bit/96kHz audio source
- Exclusive PLL power supply is built in to reproduce the stable electrical supply
- High quality analog headphone amp to drive any type of headphones
- Equipped with hgih-grade AKM 32bit(*) DAC AK4390
- Condensers and OP amp designed exclusively for audio products
- USB / Digital (Optical) input selector
- Headphones / RCA (Analog) output selector
- Doubles as D/D converter from USB digital audio to Optical
- An USB/AC adapter from the shelf can be used for use as an Optical / Analog converter
Note: When using the USB input, the sampling frequency is fixed at 96kHz. Audio file with Fs 32k/44.1k/48kHz will be reproduced by upsampling to 96kHz and the S/PDIF Out is also fixed at 96kHz.
Input
USB port sampling frequency 16bit-24bit/96kHz
Interface: USB full speed
Digital Connector: optical, square
Format: S/PDIF (32kHz - 96kHz)
Output
Phones Connector: Stereo phone
Max Output: 100mW (32-ohm loaded)
THD: less than 0.01% at 1kHz, 32-ohm loaded, 100mW
Frequency response: 20Hz / 20kHz +-0.3dB (32ohm loaded, 100mW)
Analog Connector: RCA Pin
Reference output level -10dBV
THD: less than 0.01% at 1kHz
Frequency response: 20Hz / 20kHz +-0.3dB
Digital Connector: Optical, square
Format S/PDIF (32kHz - 96kHz)
General
Power: DC5V (via USB port)
Power Consumption: 2.5W
Accessories: 1 x USB cable (1.0m), 4 x rubber foot, manual
Dimensions: 108mm(W) x 36mm(H) x 140mm(D)
Weight: approx. 450g
|
Transit Pro is a super-high resolution USB/DSD (Direct Stream Digital) converter that takes audio signal from your computer and delivers the highest quality digital (optical)/analog signal to any audio component. The key to Transit Proʼs outstanding audio performance is its 32bit/384kHz digital "engine,” which delivers a super-wide bandwidth frequency response, ultra-wide dynamic range and an extremely low noise floor. There are eight user-selectable sampling rates between 44.1 and 384kHz so you can achieve the exact performance level needed for any given circumstance.
Transit Pro has a built-in high quality headphone amplifier with both ¼-inch and 1/8-inch jacks, for connecting any headphones directly without the need for an adapter. Transit Pro is USB-bus-powered or you can use an optional AC wall adapter (not included). Transit Pro is the answer when you need to deliver a reference-quality digital signal from your computer to an external audio component.
Features - Super-high resolution USB to optical/DSD converter
- Eight user-selectable sampling rates: 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384kHz
- Signal-to-noise ratio: 112dB
- Extremely low distortion: THD+N 0.003%
- Digital (optical) and analog outputs
- Direct Stream Digital rates: DSD64, DSD128
- Dual headphone outputs: ¼-inch, 1/8-inch
- Compatible with headphones from 16–600 ohms
- USB-bus-powered or optional AC adapter
Requirements - Minimum System Requirements:
- M-Audio Windows Driver
- Windows 7
- OSx 10.9
| Analog to Digital Optical Toslink Audio RCA Converter/Adapter, With power adapter
The ARTSOUND new * Analog to Digital Audio Adapter/Converter * converts analog Left/Right RCA-style audio connections to digital S/PDIF coax or TOSLink outputs.The unit is compact, easy to install, and operates in a wide variety of operating conditions.
How it works:
Simply plug in your analog audio source into the RCA jacks, then connect your digital receiving device ...
So you’ve got your entire audio system running Digital (Coax or Toslink) audio, but you’ve got one old piece of equipment with analog output that is gumming up the works? No problem! Just get the Analog to Digital Audio Converter and bring your old equipment into the digital age!
This compact little converter has a set of right/left RCA analog audio input jacks. It will simultaneously convert the analog audio into Coax and Optical (Toslink) Digital signals. You can connect either or both outputs to an appropriate digital audio input on a TV, AV receiver, or anything else.
The converter has a digital sampling rate of 48 kHz and produces an LPCM stereo audio output signal. It is powered by a 5V DC power adapter, which is included. All the connectors are gold-plated.
Note that this converter only works one way – Analog to Digital. It will NOT convert digital signals to analog! | The Audioengine D3 Premium 24-bit DAC (digital-toanalog converter) allows you to bypass your
computer's headphone output and send music
directly through a USB port for noticeably improved
fidelity and a higher output.
Portable USB audio converter for Mac or PC
Stream bit-perfect native 24/96 HD audio
High-performance headphone amp included
Plug-and-play, no drivers or software to install
Connect headphones or any music system
Easily drives low impedance headphones
Computer OS volume control
Asynchronous data transfer with dual master clocks
HD indicator for sample rates above 48K
Metal injection molded (MIM) aluminum case | The DacMagic Plus has fantastic new features including wireless device connectivity and stunning audio performance from music of all formats. Thanks to twin DACs it instantly improves audio fidelity from all your favourite digital products allowing you to make your computer, TV, Blu-ray player and other devices a true part of your hi-fi system.
PURE PROCESS
The DacMagic Plus works by taking a direct digital audio signal from your computer, TV or other device - bypassing their built-in digital to analogue converters.
This signal is then carefully analysed and upgraded using our ATF2 upsampling system. Once this process is complete, the DacMagic Plus outputs your music as a much purer analogue signal straight to your amplifier.
Custom developed by our dedicated team in the heart of London, DacMagic Plus is totally flexible and supports digital music of all formats. It even allows you to upgrade 24-bit music files stored on your PC for better-than-CD performance from your digital music collection.
Watch the video opposite to find out why our proprietary ATF2 upsampling technology makes such a difference to the sound produced by our DACs.
Features
Twin Wolfson WM8740 24-bit DACs used in dual differential configuration
New Anagram Technologies ATF2, 24-bit/384kHz audio upsampling/jitter reduction technology
Optional digital preamp mode allowing connection directly to power amp or active speakers
24-bit/192kHz USB Audio 2.0 with ASIO or kernel streaming modes
Selectable digital filters - linear phase, minimum phase and steep
Supports high quality aptX Bluetooth CODEC as well as standard SBC Bluetooth CODEC
Digital to analogue converters Dual Wolfson WM8740 24-bit DACs
Digital filter Analog Devices ADSP21261 DSP; upsampling to 24-bit/384kHz
Analogue filter 2-Pole Dual Differential Bessel Double Virtual Earth Balanced
Frequency response 20Hz to 20kHz (±0.1dB)*
THD @ 1Khz 0dBFs |
Reviews
There are no reviews yet.