| Content | Nimbus™
Nimbus™ is a professional dry ice machine which produces thick, white fog that hugs the floor and dissipates without rising. This powerful machine heats enough water to create fog from 10 lb of dry ice to provide 6 minutes of run time. Output and flow are easily controlled, thanks to an adjustable multi-level control arm. Dual heaters allow for faster heat-up and recycle times. A low water sensor increases safety.
• Professional dry ice machine creates thick, low-lying clouds that hug the floor
• Quickly heats water to its optimal operating temperature using simple, plug-n-play operation
• Heat the water in a fraction of the time by utilizing the second heating element
• Manipulate the output and flow with the adjustable, multi-level control handle
• Increase safety with low-water and temperature sensors that automatically shut off heaters
• Input Voltage: 120 VAC, 60 Hz or 230 VAC, 50 Hz
• Power and Current (single element): 1,500 W, 12.6 A @ 120 V, 60 Hz
• Power and Current (dual element): 3,000 W, 25.2 A @ 120 V, 60 Hz
• Power and Current (single element): 1,400 W, 6.2 A @ 230 V, 50 Hz
• Power and Current (dual element): 3,000 W, 12.3 A @ 230 V, 50 Hz
• Tank Capacity: 4.5 gal (17 l)
• Heat-up Time (single element): 50 min
• Heat-up Time (dual element): 30 min
• Average runtime: 6 min
• Reheat time (single element): 30 min
• Reheat time (dual element): 15 min
• Dry ice capacity: 10 lb (4.5 kg)
• Max water temperature: 175 °F (79 °C)
• Weight (empty): 28.6 lb (13 kg)
• Weight (full): 75 lb (34 kg)
• Size: 20 x 18 x 19 in (513 x 465 x 470 mm)
• Approvals: CE, MET | Digital technology and a new Design
The viper 2.6 is a very powerful fog generator. It unites the current digital technology with proven technique and power.
Very powerful output, simple handling and the possibility to connect an external fan are the main new features of this machine.
Features:
- Finest adjustments of the output Digital technology enables fine adjustments of the pump. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect - from a tiny fog cloud to the thickest continuous fog - can be produced. This allows an individual adaptation to the dimensions of the room. The fan can be adjusted separately from 0 - 99% .
- DMX 512 as standard
The Viper 2.6 can be controlled via DMX 512. Pump and fan can here be controlled separately. Thus, the connected fan can be used as wind machine as well. The connection is done with 5pin-XLR-plugs, two following addresses will be taken. The DMX start address can be adjusted and saved via the control panel. The address remains saved also when the machine is unplugged. The machine can also be controlled with analog (0 - 10V) via a lighting desk or a XLR-remote (option). The adjustment of the fan is done directly at the machine, the pump can be adjusted via the analog control. The connection is done with 3-pin-XLR-plug. A Stand-Alone-Mode is possible as well. The adjustments of the pump and the fan are done directly at the machine. Pressing the start button once, the machine starts running with the pre-adjusted levels.
With the internal timer, the fogging time can be adjsted in seconds, the wait time in minutes and the output in %. Once the timer is activated, the adjusted program will run until the timer is deactivated.
The control panel with LED display and simple symbols allow an easy operation. It also protects the control buttons against dirt.
- Robust flightcase version
The flightcase on wheels protect the inbuild machine and fan and ensures an easy transport and flexible handling. Handles at both sides of the case allow an easy lifting. Removable lids enable direct access to control panels and fluid tank.
Liquid
The following Look fog liquids are available for the Viper 2.6/Viper deLuxe: Quick-Fog (thick, quick disappearing fog liquid) Regular-Fog (thick, long lasting fog liquid) Slow-Fog (thick, extremely long lasting fog liquid)
Safety
The viper 2.6 is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke
complete with a collecting tray for fluid drips can be fixed.
Fluid
The following Look-fluids are available for the viper 2.6:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
Technical Data
Procedure: vaporizing fog generator
Power requirement: 2600 Watt
Voltage: 230 V / 50 Hz
Warm up time: approx. 7 min.
Fluid consumption at max. output
at continuous output: 240 ml/min.
70 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection: max. 15 m
Fogging time at
external Fan: max. 800 Watt
Air quantity adjustable in 99 steps
Control: DMX 512
0 - 10 V analog
Stand-alone-Mode
Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
Pump/Thermal switch
Dimensions (L x W x H): 520 x 230 x 250 mm
Weight without bottle: approx. 12 kg |
JEM Magnum Pro 2000 Foger. Special long lasting and reliable heating unit. Variable fog output incl. timer. 1650W, 0.2l/min. Fluid at max power. aprox.13Kg with out fluid, Dimensions of Machine: 695mm x 356mm x 325mm
Specifications :
-
700 m³/min fog output
-
1600 W heat exchanger
-
8 min heat-up time
-
Continuous output
-
Optional DMX
-
Floor standing or truss mounting
-
9.5 liter fluid capacity
-
Different fluid options for different applications
-
DMX with optional DMX interface module
-
On-board control panel
-
Removable panel for remote control
-
Timer and output level remote control
|
The cutting-edge wireless control system gives Antari W series a simple setting and operation interface. Additionally, the state-of-the-art heater design upgrades the W Series fog machines to a higher level in terms of good quality fog and energy efficiency. In conclusion, Antari W Series bring users to a professional scene in an easier method. Main Features: 1. Intelligent Wireless Control System Each machine comes with a set of wireless receiver and transmitter as standard controller. The working distance of wireless control is 50 meters in open area. 2. Opto-electronic Fluid Sensor When the fluid recipient runs dry,the fluid sensor stops pumping automatically to protect pump from burning. 3. More Efficient New Heat Exchanger Design It can generate drier fog with smaller particles.This leads to a fairly low fog fluid consumption.Compare to the equivalent power consumption heat exchangers, the same quantity of fog fluid in W series can produce 20% more fog than others. 4. New Advanced PCB (Printed Circuit Board) Design The new system can control temperature precisely and rule out the influence from outside environments as much as possible to make W series fog machines be able to work stably between - 20 and + 60 degree Celsius.
Specification
» Power : AC100V/AC120V/AC230V/AC240V,50Hz-60Hz » Heater : 800 W » Output : 3,000 cu.ft / min » First Heat-up Time : 100 seconds » Tank Capacity : 0.8 liter » Fluid Consumption Rate : 60 min / 0.8liter (100% Output) » Remote Included : W-1 Wireless Remote » Weight : 3.8 Kg » Dimensions (mm) : L 315 W 128 H 166 » Liquid Used : Antari FLR / FLG Liquid
|
The ZR33 Hi-Mass is a powerful and instant atmosphere generator for large clubs, stage productions, rental companies and industrial applications.
* Continuous output
* 1000 m³/min fog output
* 1500 W heat exchanger
* 8 min heat-up time
* Floor standing or truss mounting
* 9.5 liter fluid capacity
* Different fluid options for different applications
* Low fluid sensing
* Onboard DMX
* On-board control panel
* Removable panel for remote control
* Multifunctional remote control
| 1200 watt fogger with DMX
- Continuous output
- Rugged metal housing with handle, mounting bracket and safety eyelet
- Heating element with Unicore technology
- Economic temperature control of the heating element
- Adjustable timer with interval, duration and output volume, continuous output, manual activation
- Output distance: Approx. 7 m
- Control via Wireless remote control (optional); DMX; wired remote control
- For application areas such as: Party room; Clubs/dancing school; restaurants, bars and hotels
- Removable tank with level indication
- Operates on water-based fluid
Package contents
- 1 x device, 1 x user manual, 1 x mounting bracket, 1 x remote control, 2 x knurled screw, 2 x screw, 4 x washer, 1 x container, 1 x tube, 1 x filter
| Power supply: |
230 V AC, 50 Hz |
| Power consumption: |
1200 W |
| IP classification: |
IP20 |
| Power connection: |
Fixed power supply cord with safety plug |
| Warm-up time: |
Approx. 6 min |
| Output volume: |
Approx. 510 m³/min |
| Output distance: |
Approx. 7 m |
| Tank capacity: |
2,5 l water-based fluid removable tank |
| Fluid consumption: |
Approx. 70 ml/min |
| DMX channels: |
1 |
| DMX input: |
1 x 3-pin XLR (M) mounting version |
| DMX output: |
1 x 3-pin XLR (F) mounting version |
| Control: |
Wireless remote control (optional); DMX; wired remote control |
| Housing color: |
Grey |
| Heater: |
1100 W |
| Color: |
Grey |
| Dimensions: |
Width: 25 cm
Depth: 48 cm
Height: 26 cm |
| Weight: |
11,50 kg |
Accessories/ordering info:
Remote: Z-8 (included)
Cable Length: 10 m
Connector DMX: 3 Pin XLR in-out
Connector remote: 6,3 mm Stereo Jack
Functions: timer with interval,
duration and volume;
Continuous fogging; manual on/off
Compatible With: Z-1200II, ICE-101,
LCU-1
Optional:
Z-9 Wireless Remote: Ordernr: 60698
|
Reviews
There are no reviews yet.