Crown XLI1500 The Crown XLI 1500 is a reasonably priced, but robust and powerful power amplifier. It ideally suits the use in budget-oriented applications at both mobile and stationary areas. It offers a power of 2 x 450 Watts at 4 Ohms. Thereby, the integrated fan guarantees a high operating safety, due to the constant […]
Crown XLI1500
The Crown XLI 1500 is a reasonably priced, but robust and powerful power amplifier. It ideally suits the use in budget-oriented applications at both mobile and stationary areas. It offers a power of 2 x 450 Watts at 4 Ohms. Thereby, the integrated fan guarantees a high operating safety, due to the constant airstream for cooling the power amplifier. The XLI 1500 offers a robust an analogue circuit, which is supplied by a conventional power supply. Furthermore it features three different, selectable modes (stereo, bridge and parallel).
Crown XLI 1500:
- Reasonably priced, robust and powerful power amplifier
- Robust and analogue circuit
- LED display for each channel for signal, clip and error
- Stereo, bridge and parallel modes
- Conventionall power supply
- Performance: 2 x 330 W / 8 Ohm, 2 x 450 W / 4 Ohm
- Inputs: Cinch, XLR
- Outputs: 2 x speakon, spring clip
- Robust 19 inch housing
- Height: 2 U
Specifications
| XLi800 | XLi1500 | XLi2500 | XLi3500 | |
| Channels | 2 | 2 | 2 | 2 |
| Sensitivity (full rated power at 8 ohms) | 0.775V or 1.4V | 0.775V or 1.4V | 0.775V or 1.4V | 0.775V or 1.4V |
| Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted) | > 100 dB | > 100 dB | > 100 dB | > 100 dB |
| Total Harmonic Distortion (THD) (20Hz – 20kHz) | ||||
| Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB) | = / | = / | = / | = / |
| Frequency Response (at 1W, 20Hz – 20kHz) | 0 dB, -1 dB | 0 dB, -1 dB | 0 dB, -1 dB | 0 dB, -1 dB |
| Crosstalk (below rated power) | at 1kHz: -75 dB | at 1kHz: -75 dB | at 1kHz: -75 dB | at 1kHz: -75 dB |
| at 20kHz: – 59 dB | at 20kHz: – 59 dB | at 20kHz: – 59 dB | at 20kHz: – 59 dB | |
| Damping Factor (from 10Hz to 400Hz, 8 ohms) | > 200 | > 200 | > 200 | > 200 |
| AC Line Voltage and Frequency Configurations (± 10%) | 120VAC 60Hz | 120VAC 60Hz | 120VAC 60Hz | 120VAC 60Hz |
| 220VAC 50/60Hz | 220VAC 50/60Hz | 220VAC 50/60Hz | 220VAC 50/60Hz | |
| 230-240VAC 50/60Hz | 230-240VAC 50/60Hz | 230-240VAC 50/60Hz | 230-240VAC 50/60Hz | |
| Dimensions (H x W x D) | 3.5″ x 19″ x 12.4“ | 3.5″ x 19″ x 12.4“ | 3.5″ x 19″ x 12.4“ | 3.5″ x 19″ x 14.4“ |
| (89 x 482 x 315mm) | (89 x 482 x 315mm) | (89 x 482 x 315mm) | (89 x 482 x 366mm) | |
| Net Weight | 25.1 lb (11.4 kg) | 28.0 lb (12.7 kg) | 29.7 lb (13.5 kg) | 43.0 lb (19.5 kg) |
| Net Shipping Weight | 29.5 lb (13.4 kg) | 32.4 lb (14.7 kg) | 34.2 lb (15.5 kg) | 47.4 lb (21.5 kg) |
<br>* Input Sensitivity : 0 dBu/0.775 V, +6 dBu/1.55 V at rated output / 4 ohms ref. 1 kHz<br>* Maximum Input Level : +21 dBu / 8.7 V<br>* Input Impedance active balanced : 20 kohms<br>* THD at Rated Output : < 0.05 % MBW = 80.0 kHz, f = 1 kHz<br>* IMD -SMPTE : < 0.01 % 60 Hz, 7 kHz, at rated output<br>* Signal-to-Noise Ratio : >105 dB at rated output into 4 ohms, <br> A-weighted, RMS, input sensitivity +6 dBu<br>* Attenuation at rated output : > 70 dB f = 1 kHz<br>* Damping Factor internal 1 kHz : > 300<br>* DIM 30 : < 0.01 %<br>* DIM 100 : < 0.01 %<br>* Slew Rate internal : > 25 V / ?s<br>* Power Consumption : 300 W 1/8 rated output into 4 ohms<br>* Width : 483 mm<br>* Height : 88.1 mm<br>* Depth : 426 mm<br>* Weight : 14 kg<br> </p></td><td>
<p>
Solid DYNACORD amplifier technology at highly competitive prices.<br>
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.<br>
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.<br>
Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 900 W, 4 Ω - 600 W, 8 Ω - 380 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 1700 W, 4 Ω - 950 W, 8 Ω - 480 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 1800 W, 8 Ω - 1200 W Input Sensitivity, rated power @ 8 Ω, 1 kHz +3.1 dBu (1.11 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class AB Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 14.8 kg (32.6 lbs)<br>
</p></td><td>
<p>
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.<br>
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
</p>
<p>
Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 650 W, 4 Ω - 450 W, 8 Ω - 270 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 1150 W, 4 Ω - 660 W, 8 Ω - 350 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 1300 W, 8 Ω - 900 W Input Sensitivity, rated power @ 8 Ω, 1 kHz + 2,2 dBu (1,0 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class AB Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 12.6 kg (27.8 lbs) <br>
</p></td><td>
<p>- Output Power:<br>
500W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD<br>
330W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD<br>
- Bridge Mode, Mono 820W RMS @ 8 Ohms, 1K Hz, 1% THD<br>
- Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)<br>
- Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz<br>
- Slew Rate: 15V Per usec<br>
- Damping Factor: @ 8 Ohm: 300<br>
- Impedance: 20 Ohms balanced / 10 Ohms unbalanced<br>
- Cooling System: 2 individual fans<br>
- Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift; Limiter<br>
- build in clip limiter<br>
- Input: XLR 3pin + Jack 6,3mm<br>
- output: Speakon + Binding post<br>
- Dimensions (LxWxH): 360 x 482 x 88mm 2-rack mount spaces<br>
- Weight: 15 KG. <br></p></td></tr><tr class= "acrobat_reader_logo."){kind=logo}
Reviews
There are no reviews yet.