The DALI OBERON 1 is a ultra compact bookshelf speaker. The cabinet size enables an optimal balance between inner volume for bass performance and a compact appearance for easy integration – suited for smaller rooms, discreet audio setups or wall mounting. It features the same oversized 29 mm ultra-lightweight soft dome tweeter as its floor-standing […]
The DALI OBERON 1 is a ultra compact bookshelf speaker. The cabinet size enables an optimal balance between inner volume for bass performance and a compact appearance for easy integration – suited for smaller rooms, discreet audio setups or wall mounting. It features the same oversized 29 mm ultra-lightweight soft dome tweeter as its floor-standing siblings, and a SMC based 5.25″ wood fibre woofer to handle lower midrange and bass. The OBERON 1 is based on the most innovative DALI ideas, traditions and inventions – united in a sleek compact design.
EASY TO POSITION
The driver materials, crossover design and geometry applied in the OBERON series has been selected to achieve a wide dispersion pattern. This ensures a well-integrated sound, even when listening at a significant off-axis angle. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion. This is why all DALI speakers are not designed to be toed-in.
CONTEMPORARY DESIGN
The rounded edges and rustic fabric of these new DALI front grilles add a lighter and more contemporary visual look to the OBERON series. This look is enhanced by the elegantly shaped aluminium base mounted on the two floor-standing models.
WOOD FIBRE CONE
The OBERON woofer features a wood fibre cone with a blend of fine grain paper pulp, reinforced with wood fibres, which creates a stiff, light-weight and well-behaving structure. In combination with a low-loss surround and spider suspension, this cone reproduces the micro details in the signal – unfiltered and with high accuracy.
PATENTED SMC
The iron pole piece of the OBERON woofer magnet is crowned by a patented SMC disk – minimizing the negative effects of the iron. The use of the SMC disk greatly reduces mechanical distortion, which lowers third order distortion. This allows for a longer listening pleasure, a relaxed midrange and a surprising amount of detail for its price class.
Frequency Range (+/-3 dB) [Hz]: 51 – 26,000
Sensitivity (2,83 V/1 m) [dB]: 86
Nominal Impedance [ohms]: 6
Maximum SPL [dB]: 106
Recommended Amplifier Power [W]: 25 – 100
Crossover Frequency [Hz]: 2,800
Crossover Principle: 2-way
High frequency driver, Quantity: 1 x 29 mm
High frequency driver, Diaphragm type: Soft Textile Dome
Low frequency driver, Quantity: 1 X 5.25“
Low frequency driver, Diaphragm type: Wood Fibre Cone
Enclosure type: Bass Reflex
Bass Reflex Tuning Frequency [Hz]: 50
Connection Input: Single Wire
Recommended Placement: Shelf or stand
Recommended Distance From Wall [cm]: 1 – 50
Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234
Weight [kg]: 4.2
Accessories Included: Manual, Rubber Feet, Front Grille
Weight
5.00 kg
Reviews
There are no reviews yet.
Be the first to review “Dali Oberon 1 Bookshelf Loudspeakers 2-way (pair) black” Cancel reply
The DALI OBERON 1 is a ultra compact bookshelf speaker. The cabinet size enables an optimal balance between inner volume for bass performance and a compact appearance for easy integration - suited for smaller rooms, discreet audio setups or wall mounting. It features the same oversized 29 mm ultra-lightweight soft dome tweeter as its floor-standing siblings, and a SMC based 5.25" wood fibre woofer to handle lower midrange and bass. The OBERON 1 is based on the most innovative DALI ideas, traditions and inventions - united in a sleek compact design.
EASY TO POSITION
The driver materials, crossover design and geometry applied in the OBERON series has been selected to achieve a wide dispersion pattern. This ensures a well-integrated sound, even when listening at a significant off-axis angle. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion. This is why all DALI speakers are not designed to be toed-in.
CONTEMPORARY DESIGN
The rounded edges and rustic fabric of these new DALI front grilles add a lighter and more contemporary visual look to the OBERON series. This look is enhanced by the elegantly shaped aluminium base mounted on the two floor-standing models.
WOOD FIBRE CONE
The OBERON woofer features a wood fibre cone with a blend of fine grain paper pulp, reinforced with wood fibres, which creates a stiff, light-weight and well-behaving structure. In combination with a low-loss surround and spider suspension, this cone reproduces the micro details in the signal - unfiltered and with high accuracy.
PATENTED SMC
The iron pole piece of the OBERON woofer magnet is crowned by a patented SMC disk - minimizing the negative effects of the iron. The use of the SMC disk greatly reduces mechanical distortion, which lowers third order distortion. This allows for a longer listening pleasure, a relaxed midrange and a surprising amount of detail for its price class.
Frequency Range (+/-3 dB) [Hz]: 51 - 26,000
Sensitivity (2,83 V/1 m) [dB]: 86
Nominal Impedance [ohms]: 6
Maximum SPL [dB]: 106
Recommended Amplifier Power [W]: 25 - 100
Crossover Frequency [Hz]: 2,800
Crossover Principle: 2-way
High frequency driver, Quantity: 1 x 29 mm
High frequency driver, Diaphragm type: Soft Textile Dome
Low frequency driver, Quantity: 1 X 5.25“
Low frequency driver, Diaphragm type: Wood Fibre Cone
Enclosure type: Bass Reflex
Bass Reflex Tuning Frequency [Hz]: 50
Connection Input: Single Wire
Recommended Placement: Shelf or stand
Recommended Distance From Wall [cm]: 1 - 50
Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234
Weight [kg]: 4.2
Accessories Included: Manual, Rubber Feet, Front Grille
Frequency Response: 80 Hz - 35 KHz Sensitivity (1W@1m): 87 dB Nominal Impedance: 8 Ohms Power Handling Single (RMS): 60 W System Power Handling (RMS): 100 W Recommended Amplifier Requirements: 10 - 100 W Maximum SPL (dBA): 105 Bass Alignment: Bass reflex - rear ported Drive Unit Complement: 1 x 100mm (4“) MMP®II cone mid-bass driver. 1 x 25mm (1“) C-CAM® gold dome tweeter External Dimensions (H x W x D): mm (inches) 198 x 125 x 140 mm (7 13/16 x 4 15/16 x 5 1/2) Weight (each): Kg (lbs) 2 (4 3/8)
# Perfect for use with 55-inch class and larger ultra-shallow TVs
# Only 1.5 inches (38mm) deep
# Wall mount bracket and table stand included
# Simply the best ultra slim on-wall speaker on the planet
# The dynamic punch, wide frequency range and broad dispersion of full size speakers
# Aircraft grade extruded Aluminum enclosure
# Anodized Aluminum dome XTDD drivers
# Pure Aluminum dome tweeter
Dimensions (mounted on wall without bracket) :32" H x 6" W x 1-1/2" D (81.5cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :32" H x 6" W x 1-9/16" D (81.5cm x 15.2cm x 40mm)
Dimensions (on table stand) :35" (89.1cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :4 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :70Hz - 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :30 - 200 Watts per channel
Enclosure :Extruded Aluminum, sealed
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black
System Format: 2 Way Frequency Response: 42 Hz - 60 kHz Sensitivity (1W@1M): 88 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 112.6 dBA Power Handling (RMS): 120 W Recommended Amplifier Requirements (RMS): 60 - 120 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: 2.7 kHz Drive Unit Compliment: 1 x 6.5" RST bass/mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D)
362 x 210 x 303 mm (14 3/8 x 8 1/4 x 11 15/16 inch) Weight (each) Excluding stands: 9.9 Kg (21.75 lbs)
AVAILABLE IN SIX COLOR FINISHES
Dimensions (mounted on wall without bracket) :27" H x 6" W x 1-1/2" D (68.6cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :27" H x 6" W x 1-9/16" D (68.6cm x 15.2cm x 40mm)
Dimensions (on table stand) :30" H (76.2cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :92Hz – 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum
Product weight (without table stand) :5.1 lbs. (2.3kg)
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black
Itʼs widely understood that the sound of surround TVs cannot compete with the excitement of a properly designed and equalised home theatre system. But great sound comes at the expense of living space…until now. The wall-hugging RX-FX surround speaker reconciles the problem by providing a convincing, enveloping timbre-consistent surround sound that places you on the edge of your seat and at the heart of the action. Discreet enough to be flush-mounted on side or rear walls, the RX-FX design will blend with the system and your décor so completely youʼll wonder why you ever thought of compromise. Itʼs also immensely flexible sonically, offering direct or diffuse sound effects at the flick of a switch.
System Format: 2 Way Frequency Response: 60Hz - 35kHz Sensitivity (1W@1M): 89dB Nominal Impedance: 6 Ohms Maximum SPL (dBA): 111.8 Power Handling (RMS): 80W Recommended Amplifier Requirements (RMS): 10-80W Bass Alignment: Sealed Cabinet Tweeter Crossover Frequency: 2.1kHz Drive Unit Complement: 1 x 6" RST® Bass/Mid driver. 2 x 1" (25mm) C-CAM® gold dome tweeters Product External Dimensions: (H x W x D) 250 x 300 x 120 mm (9 13/16 x 11 13/16 x 4 3/4 inch) Individual Weight: 4.69 Kg (10.38 lb)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.