Content | With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.
This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter.
This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style.
With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover.
As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.
DALI OBERON 7 SPECS
Product series | OBERON |
Frequency Range (+/-3 dB) [Hz] |
36 - 26,000 |
Sensitivity (2,83 V/1 m) [dB] |
88.5 |
Nominal Impedance [ohms] |
6 |
Maximum SPL [dB] |
110 |
Recommended Amplifier Power [W] |
30 - 180 |
Crossover Frequency [Hz] |
2,300 |
Crossover Principle |
2-way |
High frequency driver, Quantity |
1 x 29 mm |
High frequency driver, Diaphragm type |
Soft Textile Dome |
Low frequency driver, Quantity |
2 X 7“ |
Low frequency driver, Diaphragm type |
Wood Fibre Cone |
Enclosure type |
Bass Reflex |
Bass Reflex Tuning Frequency [Hz] |
39.5 |
Connection Input |
Single Wire |
Recommended Placement |
Floor |
Recommended Distance From Wall [cm] |
20 - 80 |
Dimensions With Base (HxWxD) [mm] |
1015 x 200 x 340 |
Weight [kg] |
14.8 |
Accessories Included |
Manual Rubber Feet Spikes Front Grille |
|
System Format: 3 Way Frequency Response: 30 Hz - 60 kHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 116.8 dBA Power Handling (RMS): 200 W Recommended Amplifier Requirements (RMS): 100 - 200 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: L.F - M.F: 790 Hz M.F - H.F: 2.3 kHz Drive Unit Compliment: 2 x 6.5" RST bass driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 1060 x 210 x 330 mm (41 3/4 x 8 1/4 x 13 inch) Weight (each) Excluding stands: 27.2 Kg (59.9 lbs) AVAILABLE IN SIX COLOR FINISHES
|
Dimensions | Metric :46" H x 8-1/2" D x 5-1/2“W | 116.8 x 21.6 x 14.0 cm
Height with Base | Metric :47.5" | 120.7 cm
Base Dimensions | Metric :10-1/2" W x 14" D | 26.7 x 35.6 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" BDSS midrange drivers; One 5" x 10" long-throw racetrack subwoofer pressure coupled to two 5" x 10" long-throw racetrack radiators.
Frequency Response :16 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :93 dB
Recommended Associated Amplifier Power :20 – 250 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Internal Amplifier Power :300 watt
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
Inputs :One pair of 5 way binding posts; One LFE input (optional)
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Granite
Accessories :Plastic foot tippers; Isolation spikes
Packaging :One to a carton
Weight | Metric :54 lbs | 24.5 kg
Warranty :5 Years; 3 Years for Amplifiers
|
Dimensions | Metric :5-7/16" W x 4-1/4" D x 25-1/4" H | 13.8 x 10.8 x 64.1 cm
Height with Base | Metric :26-5/8” | 65.1 cm
Base Dimensions | Metric :8” W x 6” D | 20.3 x 16.5 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" high definition upper bass/midrange drivers; Two 4-1/2" pressure coupled bass radiators
Frequency Response :45 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Tempered Glass
Mounting Options :Vertically Only: On Shelf with included glass base; On wall with included flush mounting bracket
Accessories :Wall bracket; Glass Base
Packaging :One to a carton
Weight | Metric :15 lbs | 6.8 kg
Warranty :5 Years |
Recommended Usage Front Speakers
Type 3-Way Bass Reflex Design
Woofers Dual 8" PMD Cone
MidRange Driver 5" Cone With Waveguide Horn
Tweeters 1" Aluminum Dome With Waveguide Horn
Magnetic Shielding Yes
Twin Bass Reflex Ports Single Port
Gold-Plated Brass Extruded Terminals Bi-Wiring Terminals
Frequency Response 30 Hz - 35 kHz
Sensitivity 89 dB/2.83 V/1 m
Input Power (Maximum / Nominal) 250W / 100W
Impedance 6 Ohms
Product Dimensions (W x H x D) 10-7/8" x 43-5/16" x 15-3/8“
Product Weight (lbs. each) 53.7
|
Dimensions | Metric :42" H x 8" W x 12-1/4" D | 106.7 x 20.3 x 31.1 cm
Driver Complement :Two 1" aluminum dome tweeters; Two 6-1/2" high definition bass/midrange drivers
Frequency Response :20Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 300 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Inputs :One set of 5 way binding posts
Available Finishes :Piano-Black Gloss
Accessories :Feet; Isolation Spikes
Packaging :One to a carton
Weight | Metric :57 lbs | 25.9 kg
Warranty :5 Years
|
Reviews
There are no reviews yet.