Content | With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.
This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter.
This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style.
With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover.
As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.
DALI OBERON 7 SPECS
Product series |
OBERON |
Frequency Range (+/-3 dB) [Hz] |
36 - 26,000 |
Sensitivity (2,83 V/1 m) [dB] |
88.5 |
Nominal Impedance [ohms] |
6 |
Maximum SPL [dB] |
110 |
Recommended Amplifier Power [W] |
30 - 180 |
Crossover Frequency [Hz] |
2,300 |
Crossover Principle |
2-way |
High frequency driver, Quantity |
1 x 29 mm |
High frequency driver, Diaphragm type |
Soft Textile Dome |
Low frequency driver, Quantity |
2 X 7“ |
Low frequency driver, Diaphragm type |
Wood Fibre Cone |
Enclosure type |
Bass Reflex |
Bass Reflex Tuning Frequency [Hz] |
39.5 |
Connection Input |
Single Wire |
Recommended Placement |
Floor |
Recommended Distance From Wall [cm] |
20 - 80 |
Dimensions With Base (HxWxD) [mm] |
1015 x 200 x 340 |
Weight [kg] |
14.8 |
Accessories Included |
Manual
Rubber Feet
Spikes
Front Grille |
|
Driver Complements Subwoofer 2 - 6" Diameter (15.24cm) Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphragms 2 - 5" Diameter (12.70cm) Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphrams Mid/Woofer 1 - 6 1/2" Diameter (16.51cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 5 1/4" Diameter (13.34cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone Midrange 1 - 3 1/4" Diameter (8.26cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 3 1/4" Diameter (8.26cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone Tweeter 1 - 1" Diameter (2.54cm) Dynamic Balance Enhanced Ring Radiator Tweeter 1 - 1" Diameter (2.54cm) Dynamic Balance Ehanced Ring Radiator tweeter Electrical Overall Frequency Response 20Hz-40kHz 22Hz-40kHz Lower -3dB Limit 38Hz dB 42Hz dB Upper -3dB Limit 30kHz dB 30kHz dB Nominal Impedance compatible with 8 ohm outputs ohms compatible with 8 ohm outputs ohms Recommended Amplifier Power 20-300 w/channel 20-250 w/channel Efficiency 88 dB 88 dB Crossover Orth Crossover Orth Crossover Crossover (mid-high array) 3000Hz 2800Hz Crossover (subwoofer) 100HZ 100Hz Inputs Dual Gold-Plated Binding Posts Dual Gold-Plated Binding Posts Dimensions Cabinet Size 50 13/16" H x 9 1/2" W x 18 7/16" D (129.06cm H x 24.13cm W x 46.83cm D) 47" H x 8 5/16" W x 14 3/8" D (119.38cm H x 21.11cm W x 36.51cm D) Footprint Size 10 1/2" W x 20 5/16" D (26.67cm W x 51.59cm D) 9 1/4" W x 16 1/4" D (23.50cm W x 41.27cm D) Mounting Options floor floor Enclosure Type Sealed Sealed Enclosure Type (subwoofer) Dual PowerPort Dual PowerPort bass venting Shipping/Other Product Weight 99.20 lbs. (45.00kgs) 78.00 lbs. (35.38kgs) Shipping unit: each each Total Shipping Weight 114.70 lbs. (52.03kgs) 86.40 lbs. (39.19kgs) Speaker Warranty 5 years parts and labor (original purchaser) 5 years parts and labor (original purchaser) ALSO AVAILABLE IN "EBONY" COLOR
| Two way, double series reflex
2 x Woofer 130 mm.
Coated paper, double magnet
Tweeter 26 mm.
Soft dome (silky fabric)
Impedance: 8 Ohm (min. 6,5)
RMS POWER: 100 W
MAX POWER: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1030x220mm.
Net weight: 16 Kg.
Finish: leather and cherrywood (or walnut vinyl) |
Room-filling sound without a room-filling speaker cabinet. Slimmer than ever before, the 684 S2 offers an amazing combination of floorstander power, audio performance and unbeatable value.
Switching to 5-inch bass/midrange drivers from the previous 6.5-inch cones, means the 684 S2 is now significantly slimmer than its predecessor, with simultaneously improved audio performance, thanks to Bowers & Wilkins innovation. The two Kevlar cone drivers benefit from smaller voice coils to increase sensitivity.
The 5-inch drivers now also feature Anti-Resonance Plug dustcaps, technology taken from our high-end PM1 speakers, that improve pistonic movement inside the voice coil. This helps to deliver amazingly distortion-free midrange performance, all in a smaller space.
As well as slimmer, improved driver performance, the 684 S2 also features a Decoupled Double Dome tweeter. Double dome technology, brought across from the CM10, increases tweeter rigidity for a more precise sound, while the tweeter sits in a gel-filled cavity, decoupled from the surrounding cabinet - which removes resonances and vibrations, for a more natural, spacious sound.
Woven Kevlar | Yes | Crossover Tuning | Yes | Nautilus Tapering Tube | Yes | Flowport | Yes | Technical features | Decoupled Double Dome aluminium tweeter with NautilusTM tube loading
Kevlar® brand fibre cone bass/midrange drivers
FlowportTM | Description | 2-way vented-box system | Drive units | 1x ø25mm (1 in) aluminium dome high-frequency
2x ø130mm (5 in) woven Kevlar® cone bass/
midrange | Frequency range | -6dB at 45Hz and 50kHz | Frequency response | 72Hz - 22kHz ±3dB on reference axis | Dispersion | Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc | Sensitivity | 87dB spl (2.83V, 1m) | Harmonic distortion | 2nd and 3rd harmonics (90dB, 1m)
|
|
Single Ported HiVe® II technology Sealed Mid-range TLE® 2 x 6.5” long-throw RDT® bass drivers 1 x 4” RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather. Finish options: Santos Rosewood veneer with clear gloss piano lacquer Ebony veneer with clear gloss piano lacquer Piano black gloss Optional dedicated floor stands are available Frequency Response: 35 Hz - 100 KHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 117.8 dBA Power Handling (RMS): 250 W Recommended Amplifier Requirements (RMS): 100 - 250 W Bass Alignment: Rear Ported HiVe®II technology Sealed Mid-range TLE® Mid / H.F Crossover Frequency: 3600 Hz Bass Low Pass Crossover Frequency: 600 Hz Drive Unit Complement: 2 x 6.5" long-throw RDT® bass drivers 1 x 4" RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer External Dimensions - Including Fixed Plinth (H x W x D): 998 x 360 x 375 mm (39 5/16 x 14 3/16 x 14 3/4 inches) Weight (each) Including Plinth: 33Kg (72.7 lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Frequency Response: 48 Hz - 35 KHz Sensitivity (1W@1m): 90 dB Nominal Impedance: 8 Ohms Power Handling Single (RMS): 100 W System Power Handling (RMS): 150 W Recommended Amplifier Requirements: 20 - 150 W Maximum SPL (dBA): 108 Bass Alignment: Front and rear ported Drive Unit Complement: 2 x 100mm (4“) MMP®II cone bass/mid driver. 1 x 25mm (1“) C-CAM® gold dome tweeter External Dimensions (H x W x D): mm (inches) 1000 x 125 x 140 mm (39 3/8 x 4 15/16 x 5 1/2) (Without spikes) Weight (each): Kg (lbs) 10.2 (22 1/2) User's Manual
|
Reviews
There are no reviews yet.