DALI SPEKTOR 6 FLOOR STANDING SPEAKERS 2 WAY, 30-120W, 6Ω WHITE PAIR

The DALI SPEKTOR 6 is the power-house of the SPEKTOR family. Getting this much Hi-Fi performance from a speaker in this price range not only took all of our experience and know-how, but also hours and hours spent in the listening room, improving the driver and crossover designs to create the perfect audio performance. If you are looking for affordable floorstanding speakers, which delivers a punch, the SPEKTOR 6 is the perfect match for you. They are serving up a detailed, dynamic and powerful audio reproduction and are the perfect choice for any stereo or surround setup in combination with either the SPEKTOR 1 or SPEKTOR 2 compact speakers. The DALI SPEKTOR 6, like all WOOD FIBRE CONES Our low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal. AMPLIFIER FRIENDLY The amplifier friendly design makes the SPEKTOR series a perfect fit for almost any of the amplifiers in its price category. No matter if we look at compact Hi-Fi, stereo amplifiers or surround receivers, SPEKTOR will bring out the best in them, showing you just how good music and movies can sound. SOFT DOME TWEETER The dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2). LOW SIGNAL LOSS By using only DALI designed and custom-built drivers, the need for frequency correction in the crossover is eliminated. This enables us to design an exact crossover which together with carefully selected quality components ensures that the signal loss is close to zero. Frequency Range (+/-3 dB) [Hz] 43 - 26,000 Hz Sensitivity (2,83 V/1 m) [dB] 88.5 dB Nominal Impedance [ohms] 6 ohms Maximum SPL [dB] 109 dB Recommended Amplifier Power [W] 30 - 150 Watt Crossover Frequency [Hz] 2,500 Hz Crossover Principle 2-way High frequency driver, Quantity 1 x 25 mm High frequency driver, Diaphragm type Soft Textile Dome Low frequency driver, Quantity 2 x 6,5“ Low frequency driver, Diaphragm type Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz] 41.0 Hz Connection Input Single Wire Recommended Placement Floor Recommended Distance From Wall [cm] 20 - 100 cm Dimensions (HxWxD) [mm] 972 x 195 x 313 mm Weight [kg] 13.8 kg Accessories Included Spikes Rubber Feet Manual

Room-filling sound without a room-filling speaker cabinet. Slimmer than ever before, the 684 S2 offers an amazing combination of floorstander power, audio performance and unbeatable value.

Switching to 5-inch bass/midrange drivers from the previous 6.5-inch cones, means the 684 S2 is now significantly slimmer than its predecessor, with simultaneously improved audio performance, thanks to Bowers & Wilkins innovation. The two Kevlar cone drivers benefit from smaller voice coils to increase sensitivity.

The 5-inch drivers now also feature Anti-Resonance Plug dustcaps, technology taken from our high-end PM1 speakers, that improve pistonic movement inside the voice coil. This helps to deliver amazingly distortion-free midrange performance, all in a smaller space.

As well as slimmer, improved driver performance, the 684 S2 also features a Decoupled Double Dome tweeter. Double dome technology, brought across from the CM10, increases tweeter rigidity for a more precise sound, while the tweeter sits in a gel-filled cavity, decoupled from the surrounding cabinet - which removes resonances and vibrations, for a more natural, spacious sound.

System Format: 3 Way
Frequency Response: 32Hz - 35kHz
Sensitivity (1W@1M): 90dB
Nominal Impedance: 4 Ohms
Maximum SPL (dBA): 116.2
Power Handling (RMS): 175W
Recommended Amplifier Requirements (RMS): 50 - 175W
Bass Alignment: Bass reflex.
Twin HiVe®II port System
Tweeter Crossover Frequency: LF/MF: 300Hz
MF/HF: 2.2 kHz
Drive Unit Complement: 2 x 6" RST® Bass drivers.
1 x 6" RST® Bass/Mid driver.
1 x 1" (25mm) C-CAM® gold dome tweeter
Product External Dimensions:
(H x W x D)
inc. plinth & feet 960 x 275 x 388 mm
(37 13/16 x 10 13/16 x 15 1/4 inch)
Individual Weight: 21.76 Kg (47.88 lb)

User's Manual

Recommended Usage     Front Speakers
Type     3-Way Bass Reflex Design
Woofers     Dual 8" PMD Cone
MidRange Driver     5" Cone With Waveguide Horn
Tweeters     1" Aluminum Dome With Waveguide Horn
Magnetic Shielding     Yes
Twin Bass Reflex Ports     Single Port
Gold-Plated Brass Extruded Terminals     Bi-Wiring Terminals
Frequency Response     30 Hz - 35 kHz
Sensitivity     89 dB/2.83 V/1 m
Input Power (Maximum / Nominal)     250W / 100W
Impedance     6 Ohms
Product Dimensions (W x H x D)     10-7/8" x 43-5/16" x 15-3/8“
Product Weight (lbs. each)     53.7

System Format: 3 Way
Frequency Response: 35 Hz - 60 kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 114.5 dBA
Power Handling (RMS): 150 W
Recommended Amplifier Requirements (RMS): 100 - 150 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: L.F - M.F: 400 Hz
M.F - H.F: 2.6 kHz
Drive Unit Compliment: 2 x 5.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

951 x 170 x 300 mm
(37 7/16 x 6 11/16 x 11 13/16 inch)
Weight (each) Excluding stands: 22.2 Kg (48.9 lbs)