• Professional switched mode power amplifier.
• Strong, rugged steel housing.
• Clear led indicators for status mode, signal input, protection, clip, overheat.
Stereo output power 8 Ohm: 650W (1)
Stereo output power 4 Ohm: 1100W (1)
Stereo output power 2 Ohm: 1500W (2)
Bridge output power 8 Ohm: 2200W (1)
Bridge output power 4 Ohm: 3100W (2)
Frequency response (8 Ohm): 20 Hz- 20 kHz,
+/- 0,5 dB
S/N Ratio: >90 dB
Input sensitivity: 0,775V/1,0V/1,4V
THD+N (8 Ohm,
1 kHz)
¼ Output power: 200
Amplifier: 3 steps Class H
Slewrate: 13V/uSec
Protection circuit: DC/Short circuit
/VHF/Temp
Cooling: Internal heatsink with front to rear airflow
Signal input connectors: XLR 3 pin,
male/female
Speaker output connectors: Binding post,
4 pole speakon
Dimensions (LxWxH): 483 x 500 x 89 mm
Weight: 15,0 kg
(1)The output power is tested conform EIA Standard. (2) The output power is tested conform 1 kHz, 1 x THD, 40 mSec Burst
Weight
15.00 kg
Reviews
There are no reviews yet.
Be the first to review “DAP AUDIO D4502 Stage-Amp 2.2 2 x 1050W SMPS Power Amplifier” Cancel reply
• Professional switched mode power amplifier.
• Strong, rugged steel housing.
• Clear led indicators for status mode, signal input, protection, clip, overheat.
Stereo output power 8 Ohm: 650W (1)
Stereo output power 4 Ohm: 1100W (1)
Stereo output power 2 Ohm: 1500W (2)
Bridge output power 8 Ohm: 2200W (1)
Bridge output power 4 Ohm: 3100W (2)
Frequency response (8 Ohm): 20 Hz- 20 kHz,
+/- 0,5 dB
S/N Ratio: >90 dB
Input sensitivity: 0,775V/1,0V/1,4V
THD+N (8 Ohm,
1 kHz)
¼ Output power: 200
Amplifier: 3 steps Class H
Slewrate: 13V/uSec
Protection circuit: DC/Short circuit
/VHF/Temp
Cooling: Internal heatsink with front to rear airflow
Signal input connectors: XLR 3 pin,
male/female
Speaker output connectors: Binding post,
4 pole speakon
Dimensions (LxWxH): 483 x 500 x 89 mm
Weight: 15,0 kg
(1)The output power is tested conform EIA Standard. (2) The output power is tested conform 1 kHz, 1 x THD, 40 mSec Burst
Amplifier Gain 32 dB
Continuous Rated Power
(1 kHz, THD 1%) 2Ω 2100 Watts
Continuous Rated Power
(1 kHz, THD 1%) 4Ω 1500 Watts
Continuous Rated Power
(1 kHz, THD 1%) 8Ω 900 Watts
Continuous Rated Power
(20-20 kHz, THD
Number of Channels: 2
Output Power: (per channel)
8 ohms 625W 4 ohms 1150W 2 ohms 2100w
Output Power: (bridged)
8 ohms 2300W 4 ohms 4200w
THD%: (@1dB below max output)
@ 1kHz 20Hz to 20kHz Gain / Sensitivity:
Gain 32/36dB Sensitivity (for max power) +7.5/3.5dBu (1.8/1.2V)
Frequency Response: 20Hz to 20kHz (+ 0/- 0.5dB)
Power Consumption:
Nominal @ 240v into 4 ohms 2.8A Nominal @ 120v into 4 ohms 5.6A
Dimensions: (2U) (mm)
Amplifier 88(h) x 482(w) x 460(d) Single Box (UK shipping) 230 x 580 x 560 Double Box (outside UK) 250 x 610 x 600
2x1350W/4Ω-1000W/8Ω-1Χ2700W
Crown XLI 3500
The Crown XLI 3500 is a reasonably priced, but robust and powerfull power amplifier. It suits ideally for the use in budget-oriented applications at mobile and stationary area. It offers a power of 2 x 1800 W / 4 Ohm. Thereby the integrated fan guarantees a high operating safety, due to the constant airstream for cooling the power amplifier. The XLI 3500 offers a robust an analogue circuit, which is supplied by a conventional power supply. Furthermore it features three different, selectable modes (stereo, bridge and parallel).
Crown XLI 3500:
Reasonably priced, robust and powerfull power amplifier
Robust and analog circuit
LED display for each channel for signal, clip and error
Stereo, bridge and parallel modes
Conventional power supply
Performance: 2 x 1200 W / 8 Ohm, 2 x 1800 W / 4 Ohm
Inputs: Cinch, XLR
Outputs: 2 x speakon, spring clip
Robust 19 inch housing
Hight: 2 hight units
Specifications
XLi800
XLi1500
XLi2500
XLi3500
Channels
2
2
2
2
Sensitivity (full rated power at 8 ohms)
0.775V or 1.4V
0.775V or 1.4V
0.775V or 1.4V
0.775V or 1.4V
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted)
> 100 dB
> 100 dB
> 100 dB
> 100 dB
Total Harmonic Distortion (THD) (20Hz - 20kHz)
Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB)
= /
= /
= /
= /
Frequency Response (at 1W, 20Hz - 20kHz)
0 dB, -1 dB
0 dB, -1 dB
0 dB, -1 dB
0 dB, -1 dB
Crosstalk (below rated power)
at 1kHz: -75 dB
at 1kHz: -75 dB
at 1kHz: -75 dB
at 1kHz: -75 dB
at 20kHz: - 59 dB
at 20kHz: - 59 dB
at 20kHz: - 59 dB
at 20kHz: - 59 dB
Damping Factor (from 10Hz to 400Hz, 8 ohms)
> 200
> 200
> 200
> 200
AC Line Voltage and Frequency Configurations (± 10%)
120VAC 60Hz
120VAC 60Hz
120VAC 60Hz
120VAC 60Hz
220VAC 50/60Hz
220VAC 50/60Hz
220VAC 50/60Hz
220VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
Dimensions (H x W x D)
3.5" x 19" x 12.4“
3.5" x 19" x 12.4“
3.5" x 19" x 12.4“
3.5" x 19" x 14.4“
(89 x 482 x 315mm)
(89 x 482 x 315mm)
(89 x 482 x 315mm)
(89 x 482 x 366mm)
Net Weight
25.1 lb (11.4 kg)
28.0 lb (12.7 kg)
29.7 lb (13.5 kg)
43.0 lb (19.5 kg)
Net Shipping Weight
29.5 lb (13.4 kg)
32.4 lb (14.7 kg)
34.2 lb (15.5 kg)
47.4 lb (21.5 kg)
The versatile PX series power amplifiers lineup combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. 2x800W@8Ω / 2x1050W@4Ω
The versatile PX series power amplifiers lineup combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments.
2x800W@8Ω
2x1050W@4Ω
Newly developed Class-D amplifier engine with a custom LSI
Flexible onboard PEQ, crossover, filters, delay, and limiter functions
Solid DYNACORD technology for fixed installations at very competitive prices. DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch. The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.