DAP AUDIO SPZOM023 Coaxial Woofer 15inch 300W 8ohm

Discontinued
All products by DAP AUDIO

€120.96 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: Discontinued Discontinued SKU: SPZOM023 Category:
Coaxial Woofer 15inch 300W 8ohm For Dap Audio CX-15 MKII

 

Read more

Coaxial Woofer 15inch 300W 8ohm

For Dap Audio CX-15 MKII

Weight 5.00 kg

Reviews

There are no reviews yet.

Be the first to review “DAP AUDIO SPZOM023 Coaxial Woofer 15inch 300W 8ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

DAP AUDIO SPZOM023 Coaxial Woofer 15inch 300W 8ohm removeJBL CONE EON 15 PASSIVE removeEMINENCE EKP15A Kappa Pro-15 15'' 500 W 8 Ohm SPEAKER - Alu Basket removeB & C Speakers 15-PK40 Woofer 15 inch 400WRMS 99dB removeEMINENCE Delta 15 LFA 15" Speaker 500 W 8 Ohms removeJBL 2226H 15" Low Frequency Transducer (8 ohm) remove
NameDAP AUDIO SPZOM023 Coaxial Woofer 15inch 300W 8ohm removeJBL CONE EON 15 PASSIVE removeEMINENCE EKP15A Kappa Pro-15 15'' 500 W 8 Ohm SPEAKER - Alu Basket removeB & C Speakers 15-PK40 Woofer 15 inch 400WRMS 99dB removeEMINENCE Delta 15 LFA 15" Speaker 500 W 8 Ohms removeJBL 2226H 15" Low Frequency Transducer (8 ohm) remove
Imagerecone kit jbl eon15 c8reon15
SKUSPZOM023JBL-C8REON15EKP15A15-PK40ED15LFA2226H
Rating
Price€120.96 incl. GR VAT Original price was: €349.68.Current price is: €346.18. incl. GR VAT€304.06 incl. GR VAT Original price was: €304.80.Current price is: €280.00. incl. GR VAT€285.19 incl. GR VAT Original price was: €484.83.Current price is: €469.00. incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Coaxial Woofer 15inch 300W 8ohm

For Dap Audio CX-15 MKII

KAPPA PRO-15A Professional Series Recommended for professional audio in a vented mid-bass or bass enclosure. Also suitable for bass guitar.
SPECIFICATION
  • Nominal Basket Diameter 15“, 381 mm
  • Nominal Impedance 8 ohms
  • Power Rating Watts 500 W / Music Program 1000 W
  • Resonance 47 Hz
  • Usable Frequency Range 46 Hz - 4 kHz
  • Sensitivity 101
  • Magnet Weight 80 oz.
  • Gap Height 0.375“, 9.53 mm
  • Voice Coil Diameter 3“, 76.2 mm
THIELE & Small Parameters
  • Resonant Frequency (fs) 47 Hz
  • DC Resistance (Re) 5.23
  • Coil Inductance (Le) 1.01 mH
  • Mechanical Q (Qms) 8.01
  • Electromagnetic Q (Qes) 0.40
  • Total Q (Qts) 0.38
  • Compliance Equivalent Volume (Vas) 167.7 liters / 5.9 cu. ft.
  • Peak Diaphragm Displacement Volume 274 cc
  • Mechanical Compliance of Suspension (Cms) 0.16 mm/N
  • BL Product (BL) 16.6 T-M
  • Diaphragm Mass inc. Airload (Mms) 72 grams
  • Efficiency Bandwidth Product (EBP) 118
  • Maximum Linear Excursion (Xmax) 3.2 mm
  • Surface Area of Cone (Sd) 856.3 cm²
  • Maximum Mechanical Limit (Xlim) 13.2 mm
MOUNTING Information
  • Recommended Enclosure Volume Sealed N/A Vented 54-184 liters/1.9-6.5 cu.ft.
  • Overall Diameter 15.32“, 389.1 mm
  • Baffle Hole Diameter 14.0“, 355.6 mm
  • Front Sealing Gasket fitted as standard
  • Rear Sealing Gasket fitted as standard
  • Mounting Holes Diameter 0.28“, 7.1 mm
  • Mounting Holes B.C.D. 14.56“, 369.9 mm
  • Depth 6.06“, 154 mm
MATERIALS of Construction
  • Aluminum voice coil
  • Polyimide former
  • Ferrite magnet
  • Vented core
  • Die-cast aluminum basket
  • Paper Cone
  • Cloth cone edge
  • Solid composition paper dust cap
High efficiency 15" woofer with a very flat frequency response up to 2 kHz and high power handling (800W). Good LF performance, smooth voice response, and compatibility with compact bass-reflex enclosures, the 15 PK 40 achieves perfect balance in two-way systems. Specifications Nominal Diameter 380 mm (15 in) Nominal Impedance 8 Ω Minumum Impedance 6.2 Ω Power Handling (50 –500 Hz) Nominall 400 W Continuous Program2 800 W Sensitivity (1W/1m)3 99 dB Frequency Range 50-2000 Hz Voice Coil Diameter 76 mm (3 in) Winding Material Copper Former Material Glass Fibre Winding Depth 16 mm (5/8 in) Magnetic Gap Depth 9 mm (11/32 in) Flux Density 1.1 T Thiele & Small Parameters4 Fs 47 Hz Re 5.1 Ω Qes 0.33 Qms 5.1 Qts 0.31 Vas 140 dm3 (4.9 ft3) Sd 855 cm2 (132.5 in2) η0 4.2% X max ± 4 mm X var ± 6 mm Mms 84 g Bl 19.7 T·m Le 2.3 mH Mounting and Shipping Information Overall Diameter 394 mm (15.5 in) Bolt Circle Diameter 374 mm (14.6 in) Baffle Cutout Diameter 355 mm (13.9 in) Depth 162 mm (6.4 in) Flange and Gasket Thickness 16 mm (5/8 in) Net Weight 8.3 kg (18.3 lb) Shipping Weight 9.6 kg (21.1 lb) Shipping Box 450x450x200 mm (17.7x17.7x8 in) 1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. Loudspeaker in free air. 2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average SPL from 200 to 2000Hz. 4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.Recommended for professional audio as a mid-bass or floor monitor in a sealed enclosure. Also suitable as a woofer in vented, bass guitar or PA enclosures. Product type Loudspeaker Chassis
Type PA
Nominal Diameter 15 "
Nominal Diameter 381 mm
Voice Coil 2.5 "
Voice Coil 63.5 mm
Overall diameter 384.8 mm
Pitch Circle Diameter 369.9 mm
Cut- out Measurement 352.3 mm
Diameter of fixing holes 6.4 mm
Depth 160 mm
Nominal Impedance 8 Ohm(s)
Nominal Load Capacity 500 W
maximum rated load 1000 W
Sensitivity (1 W / 1 m) 96 dB
Frequency response 42 - 3200 Hz
Voice Coil Material copper
Magnet Ferrite
Depth of the magnetic gap 9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency) 39 Hz
Re (DC resistance) 6.11 Ohm(s)
Qms (mechanical quality) 6.3
Le (inductance of the voice coil) 1.37 mH
Qes (electrical quality) 0.52
Qts (overall quality) 0.48
Vas (equivalent volume) 241
Mms (moving mass) 75 g
BL (power factor) 14.6 T/m
Xmax (maximum displacement) 4.8 mm
Cms (elasticity of the suspension) 0.23 mm/N
Sd (membrane area) 873 cm²
Weight 6,449 kg

The high power handling and robust construction of the 2226H make it a natural for tour sound and fixed sound reinforcement use, while the low distortion and smooth response make it an ideal choice for critical high level monitoring applications.

To increase power handling while reducing power compression, JBL engineers created a unique, direct voice coil-to-air heat dissipation method called Vented Gap Cooling. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature—a direct improvement in power compression.

The 2226H incorporates a SFG (Symmetrical Field Geometry) magnetic structure. Computer-aided magnet optimization and analysis allowed JBL engineers to optimize magnet weight, flux density and reduced distortion. This patented magnet structure offers much of the weight advantage of rare earth magnet structures without their higher cost.

JBL 2226H 15" Low Frequency Transducer Specifications:

  • Nominal Diameter : 15" (380 mm)
  • Rated Impedance : 8ohms
  • Power Capacity : 600W AES continuous pink noise
  • Sensitivity : 97dB SPL, 1W, 1m (3.3 ft)
  • Frequency Range : 30Hz-2.5kHz
  • Power Compression - at —10 dB power (60 W) : 0.7dB
  • Power Compression - at —3 dB power (300 W) : 2.5dB
  • Power Compression - at rated power (600 W) : 4.0dB
  • Distortion - 2nd harmonic :
Weight5.00 kg1.00 kg8.80 kg6.00 kg6.50 kg10.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.00 kg
Weight 1.00 kg
Weight 8.80 kg
Weight 6.00 kg
Weight 6.50 kg
Weight 10.00 kg

Related products