Content |
For use in low voltage sound systems, a 60 W high efficiency multi-tap transformer is built into the Factor-8T. These models can be used in 50, 70 or 100 volt distributed systems and offer a 6-step impedance switch. Available in an outdoor IP-54 version.
FEATURES: 2-way vented loudspeaker system 8" speaker 1" soft dome ferrofluid cooled tweeter Wide coverage Built-in line transformer Hi-fi sound character Highly resistant polypropylene enclosure Punched steel grilles Horizontal or vertical use
SPECIFICATIONS; Transformer RMS Power Handling: 60 W RMS (Average) Power HandlingR: 100 W Program Power HandlingP: 200 W Peak Power HandlingK: >400 W Frequency ResponseF: 55 Hz - 22 kHz Total System ImpedanceI: 82/163/335/670/1340/2680 Ω Loudspeaker Nominal ImpedanceI: 8 Ω On-axis Sensitivity 1W / 1 mS: 91 dB SPL Nominal -6 dB BeamwidthsB:145° Horizontal (average, 500 Hz to 8 kHz) 135° Vertical Speech Coverage AnglesC: 155° Horizontal x 150° Vertical Enclosure Material: Mineral loaded polypropylene Color: Black or white Transducers/Replacement Parts: Bass: G-8/GM G-8 HF: TWT-8/GM TWT-8 Connector: Spring loaded push terminals Dimensions (H x W x D):44 x 27 x 23 cm (17.5 x 10.5 x 9 in) Weight:8.1 kg (18 lbs) Shipping Weight: 9.2 kg (20 lbs) Accessories (optional): AX-8 wall/ceiling mount |
The C3108 is a full range extremely versatile wide-dispersion, low profile, two-way loudspeaker system for near field applications.
Its compact size makes it ideal for low visibility side wall mounting.
The high-frequency section is a constant directivity horn loaded to a 1” neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is an 8” woofer with a 2” voice coil.
Features |
---|
90°x 70° CMD (Constant Matching Design) constant directivity horn | Linear/HF boost switch | Rotatable Horn System for horizontal cabinet mounting applications | HF driver AMCDP (Active Mosfet Compression Driver Protection) | LICC (Low Impedance Compensated Crossover) network | 4 Suspension points (M10) | Omnimount™ 75 Plate fixing positions on rear of cabinet | 35 mm standard internal pole mount |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 60 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 100 Hz | ÷ 18 kHz | Max SPL @ 1m: | 120 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 70° | | Directivity index; Q: | 9.4 | | System Sensitivity: | 94 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 300 Watt | | Peak Power Handling: | 1200 Watt | | Recommended Amplifier: | 600 | | Protections: | Dynamic | | Crossover frequencies: | 2100 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1" HFdriver, 1.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 25 Watt AES | | Sensitivity: | 109 dB | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 200 Watts AES | | Sensitivity: | 94 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 | | Output connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 10 mm birch plywood construction | | Hardware: | 3 x M10, 4 X M5, 2 X M6 inserts | | Pole Mount/Cap: | Yes | | Grille: | Custom perforated steel grille | | Colour: | Black, white, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 427 / 16.81 mm/inch | | Width: | 242 / 9.52 mm/inch | | Depth: | 228 / 8.98 mm/inch | | Net Weight: | 10 / 22 Kg/Lbs |
|
Key Features:
- Compact enclosure
- 205 mm (8 in) LF transducer
- 90° x 50° Progressive Transition™ Field
Rotatable Waveguide with a 25 mm
(1 in) exit compression driver
- Dual Neutrik NL4 connectors plus
screw terminals
- Multiple Attachment Points for Ultimate
Flexibility
Specifications:
System:
Frequency Range (-10 dB): 52 Hz - 20 kHz
Frequency Response (+/-3 dB): 63 Hz - 19 kHz
Horizontal Coverage: 90°
Vertical Coverage: 50°
Directivity Factor (Q): 8 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 9 dB (avg. 500 Hz - 16 kHz)
System Sensitivity1: 93 SPL dB/1W/1m
Rated Maximum SPL (1m)2: 117 dB
System Nominal Impedance: 8 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 250 W / 500 W / 1000 W
AES Standard Power Rating4: 375 W
Crossover: 2.1 kHz
Transducers:
Low Frequency Driver: 1 x JBL 228H, 205 mm (8 in) SFG™ driver with 64 mm (2.5 in)
edge wound voice coil
High Frequency Driver: 1 x 2408H-1 25 mm (1 in) exit compression driver, 38 mm (1.5
in) voice coil
High-Frequency Waveguide: PT-D95HF-1 (Field Rotatable)
Physical:
Enclosure: 12 mm and 15 mm exterior grade multi-ply hardwood
plywood
Suspension Attachment: 6 x M8 points; 1 top, 3 bottom, 2 rear.
4 x M6 rear for OmniMount® 30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX available upon request
Grille: Powder coated 16 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 469.9 x 237.5 x 254.0 mm
(18.5 x 9.4 x 10.0 in)
Weight: 12.8 kg (28.2 lb) |
Ειδική έκδοση του AM 7200/95 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
14 σημείων. Πιστοποίηση IP55 κατά πρότυπο IEC
529. Παράδοση κατόπιν παραγγελίας.
* 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.
* CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.
* 2432H High-Frequency Compression Driver
* PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.
* Bi-Amp/Passive Switchable.
* Optional planar array frame kits for a number of array configurations (see AE Series Array Guide).
Frequency Range (-10 dB) : 260 Hz – 20 kHz
Frequency Response (±3 dB) : 330 Hz – 18 kHz
Coverage Pattern : 90°x 50°, rotatable waveguide
Directivity Factor (Q) : 11
Directivity Index (DI) : 10.5 dB
Crossover Modes : Bi-amp/Passive switchable
Crossover Frequency : 2.2 kHz
Transducer Power Rating (AES) : MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs
Long-Term System Power Rating (IEC) : MF/HF: 200 W (800 W peak), 100 hrs
Maximum SPL5 : Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
System Sensitivity (1W @ 1m) : Passive mode: 108 dB SPL
Nominal Impedance : 8 ohms
Midrange Driver : JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver
Sensitivity (1W @ 1m)
(Midrange) : 108 dB SPL
High Frequency Driver : JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
Sensitivity (1W @ 1m)
(High Frequency) : 113 dB SPL
Waveguide : PT-K95MH
Enclosure : Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment : 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish : Black DuraFlex™ finish.
White available upon request.
Grille : Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector : NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications : Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in vertical cabinet orientation) : 548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)
Net Weight : 27.2 kg (60 lb)
Optional Accessories : M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
The P4228 is a weatherproof full range, wide-dispersion, two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
The high frequency section is a constant directivity CMD horn loaded with a 1.4” RCF Precision Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a double 8” woofer with a 2.5” voice coil. The cabinet is asingle piece rotational moulded in medium density polyethylene, full UV protected. The cabinet is equipped with 4 x M8 brass inserts, a stainless steel U-Bracket. The front logo is in aluminium and rotatable. The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. P 4228 is suitable for indoor and outdoor applications/installations, it meets the requirements of IP 55 code (International Protection Rating).
Features |
---|
Weatherproof cabinet IP 55 | Aluminium grill and stainless steel bracket | Two 8" high-output LF transducer with 2.5" voice coil | Once RCF Precision Neodymium 1.4" Compression Driver with 2.5" voice coil | 110° x 60° constant directivity horn | Built in passive crossover | 2° x 15° enclosure sides for array configurations | Active Mosfet Compression Driver Protection |
LICC (Low Impedance Compensated Crossover) network
Acoustical Specifications |
---|
Frequency Response -10 dB: | 80 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 100 Hz | ÷ 20 kHz | Max SPL @ 1m: | 129 dB | | Horizontal coverage angle: | 110° | | Vertical coverage angle: | 60° | | Directivity index; Q: | 9 | | System Sensitivity: | 97 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 400 Watt | | Peak Power Handling: | 1600 Watt | | Recommended Amplifier: | 800 | | Protections: | Dinamyc | | Crossover frequencies: | 1100 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1.4“(35.5mm) throat, 2.5" (63.7 mm) coil diaphragm assembly | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 90 Watt AES | | Sensitivity: | 110 dB | | Woofer: | 2x8" (200 mm) woofer with 2.5" (64 mm) coil | | Nominal Impedence: | 16 Ω | | Input Power Rating: | 300 Watts AES | | Sensitivity: | 95 dB | |
INPUT SECTION |
---|
Input connector: | 4 pole Amphenol | |
CABINET |
---|
Cabinet Material: | 8 mm Polyethylene rotomoulded | | Hardware: | 4 x M8 + U-bracket and pair of spacers | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | Colour: | Gray | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 268 / 10.55 mm/inch | | Width: | 566 / 22.28 mm/inch | | Depth: | 250 / 9.84 mm/inch | | Net Weight: | 13.5 / 29.7 Kg/Lbs |
|
|
* 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.
* CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.
* 2432H High-Frequency Compression Driver
* PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.
* Bi-Amp/Passive Switchable.
* Optional planar array frame kits for a number of array configurations (see AE Series Array Guide).
Frequency Range (-10 dB) : 260 Hz – 20 kHz
Frequency Response (±3 dB) : 330 Hz – 18 kHz
Coverage Pattern : 90°x 50°, rotatable waveguide
Directivity Factor (Q) : 11
Directivity Index (DI) : 10.5 dB
Crossover Modes : Bi-amp/Passive switchable
Crossover Frequency : 2.2 kHz
Transducer Power Rating (AES) : MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs
Long-Term System Power Rating (IEC) : MF/HF: 200 W (800 W peak), 100 hrs
Maximum SPL5 : Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
System Sensitivity (1W @ 1m) : Passive mode: 108 dB SPL
Nominal Impedance : 8 ohms
Midrange Driver : JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver
Sensitivity (1W @ 1m)
(Midrange) : 108 dB SPL
High Frequency Driver : JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
Sensitivity (1W @ 1m)
(High Frequency) : 113 dB SPL
Waveguide : PT-K95MH
Enclosure : Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment : 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish : Black DuraFlex™ finish.
White available upon request.
Grille : Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector : NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications : Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in vertical cabinet orientation) : 548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)
Net Weight : 27.2 kg (60 lb)
Optional Accessories : M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
Reviews
There are no reviews yet.