Content |
The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to our 900 Series and the 560A continues that tradition.
Featuring the same switch-selectable OverEasy? and Hard Knee compression curves as our industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! It’s also versatile enough to go from subtle compression to "brick wall" peak limiting. | WDR 24 is a wireless receiver in the operating free band ISM 2.4 GHz, which has been designed to work with the transmitter WDT 24, creating a digital audio wireless system.
The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
- Wireless Digital Audio Receiver System
- Operating Band ISM 2.4GHz (free band).
- One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
- GFSK digital modulation/demodulation.
- External antenna can help to increase the transmission distance.
- Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
- Automatic mute in bad channel quality conditions or high error code rate.
- Transmission distance higher than 30 meters in open places.
- Up to three transmitters WDT 24 in a zone
- Balanced XLR and unbalanced ¼\'\' jack outputs
- Working mode: stereo or mono
Power Supply |
AC 9V-500 mA 50/60 Hz |
Frequency |
2404-2476MHz |
Channel |
25 |
Modulation/Demodulation |
GFSK |
Receive Sensitivity (WDR 24) |
-84dBm (min.) |
Transmitted Power (WDT 24) |
6 dBm |
Output Level (WDR 24) |
+13dBu (BAL max.) |
Input Level (WDT 24) |
+5dBu (max.) |
Bandwidth |
>=1.8 MHz |
Frequency Response |
20Hz - 20kHz, +3dB / -3dB |
S/N |
>80 dB |
Dynamic Range @ 1 kHz |
>90 dB |
Crosstalk @ 1kHz |
>90 dB |
THD |
|
|
The Symphony I/O Chassis from Apogee provides two I/O Module slots for a variety of digital audio conversion options that form the interface side of the Symphony I/O. Elegant and easy to use, the front panel of Symphony I/O Chassis presents the visual feedback needed to monitor levels, sample rate and clock status, along with the controls required to adjust gain, output levels ,and select the Audio Interface Mode (AIM).
The rear panel provides access to the two I/O Module slots that are capable of a combined thirty-two channels of input and output. PCI, USB and Ethernet connectivity ensures complete compatibility with popular workstations, while the panel also includes Wordclock I/O connectors and termination, LoopSynch I/O connectors, and a quiet digitally-controlled fan to keep everything running cool.
The Audio Interface Mode (AIM) allows the system to be optimized for the most popular audio workstation environments, including Symphony PCI, Pro Tools HD PCI, USB audio, or to function as a standalone converter. With a two-step adjustment using a single front panel encoder knob, the interface can be easily switched back and forth between the preferred modes.
The optional five I/O Modules allow the user to choose from standard configurations, or customize the following - channel count, analog to digital input, digital to analog output, microphone preamps (requires an analog card) and digital I/O.
Two input/output module slots Ethernet connector USB 2.0 connector Two Symphony PC-32 ports for direct connection to Symphony 64 PCI card and Pro Tools core card Wordclock I/O and LoopSync I/O Wordclock termination switch Sixteen, 10-segment meters Two multi-function encoder knobs OLED GUI provides function selection and function adjustment and Audio Interface Mode (AIM) selection Two 1/4" headphone outputs 7-segment sample rate display Clock source display Meter source display High-performance, temperature controlled fan Connectors 2 x 1/4" TRS phone Headphone
2 x Symphony I/O PC-32 Ports
1 x Ethernet
1 x USB
2 x BNC Wordclock I/O
2 x BNC LoopSync I/O
Headphones THD+N: -105dB @ 19dBu
Dynamic Range: 119dB, A-weighted
Output Impedance: 30Ω
Power Requirements 90~240VAC, 50/60Hz, 150W
System Requirements Mac OS X 10.5.8 and above
Dimensions (WxDxH) 19 x 11.5 x 3.5" (483 x 292 x 89mm)
|
Κάρτα 4άρων εισόδων για BLU-800, BLU-320, BLU-160 & BLU-120 με δυνατότητα Echo cancellation. | Passive stereo line isolator with RCA sockets
- For avoiding signal interference and ground loop problems
- Input and outputs galvanically isolated
- Two high-quality audio transformers
- Rugged metal housing
- For application areas such as: Installation; mobile use; mobile djs / entertainer
Package contents
Frequency range: |
20 - 30000 Hz |
S/N ratio: |
>95 dB |
THD: |
<0,001 % at 1 kHz |
Impedance: |
Input: 15 kOhm
Output: 15 kOhm |
Connections: |
Input: line via 1 x stereo RCA
Output: line via 1 x stereo RCA |
Dimensions: |
Width: 6,7 cm
Depth: 4,2 cm
Height: 3,1 cm |
Weight: |
110 g |
|
The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction.
The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts only when required. The Interactive Attack Control (IAC) circuit analyzes the program material to calculate the attack time of the gate. Separate hold and release controls offer additional flexibility. The XR4400 has a switchable operating mode for the gate and expander. With the MODE function off, the unit works in gate mode using an extremely fast attack time, thus preserving the transient details of the program material. In expander mode, the device analyzes the shape and dynamic contents of the input signal to calculate the control time parameters. The result is that vocals, instruments and complex mix signals can be cleaned up without audible clicks or other detrimental effects.
A couple function on the XR4400 provides a great deal of flexibility to link the expander/gate sections in a master/slave configuration.
Quadruple expander/gateHigh-precision parametric filter for frequency selective operationFully adjustable Ratio control in Expander modeFully adjustable Attenuation control in Gate modeIndependent Hold/Release controls for any envelope shapingFlexLink system for flexible Master/Slave configurationsExtremely low-noise operational amplifiers and high-grade VCA\'sFilter Monitor facility for monitoring the filter sectionHigh-quality detent potentiometers and backlit switchesServo-balanced gold-plated XLR and 1/4" TRS inputs and outputs8-digit LED meters for input level, output level and gain reduction monitoring
Function |
Four channel expander/gate |
Number of Channels |
4 |
Inputs |
4 x XLR, 4 x TRS 1/4" phone |
Output |
4 x XLR, 4 x TRS 1/4" phone |
Maximum Input Level |
+21dBu |
Compression Threshold |
Not applicable |
Compression Ratio |
Not applicable |
Attack Time |
Not applicable |
Release Time |
Not applicable |
Gate Threshold |
0 to -80dB |
Gate Rate |
Attack: Program dependant Hold: 0 to 4 sec, variable Release: 50ms to 4 sec, variable |
Maximum Output Level |
+21dBu |
Make-up Gain |
Not specified by manufacturer |
Frequency Response |
18HZ to 30kHz |
Dynamic Range |
Not specified by manufacturer |
Noise |
>95dBu, unweighted, 22Hz to 22kHz |
Dimensions |
1U rack mount, 8 1/2" deep |
Specialties |
Unit will operate at either +4dB or -10 dB |
|
Reviews
There are no reviews yet.