Content |
DRIVE RACK Studio Monitor Management System
The dbx Professional Products DriveRack Studio provides all of the tools necessary to optimize Studio Monitor management in a single rack mount chassis design regardless of the environment. The DriveRack Studio offers dual XLR inputs and six XLR outputs, dual channel graphic EQ, classic dbx Compression, multiple crossovers, parametric EQ and a built-in real time audio analyzer. In addition, this audio toolbox provides the end user with 24 custom presets that have been specifically written and designed to work in tandem with the most popular studio reference monitors available. The DriveRack Studio now allows you to fine-tune even the most sonically challenged rooms. The DriveRack Studio continues the legacy of DriveRack series, which has been created by the company that has been redefining the standard of signal processing for more than 30 years. The DriveRack Studio was designed with the purpose and vision of providing state-of- the-art signal processing in the studio environment, while utilizing a simple and intuitive user interface. This goal has been achieved by offering two independent channels of processing power with a linkable 28-Band Graphic equalizer, industry-standard dbx? stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input, with a six channel output system that includes parametric EQs, and Peak Plus? limiters (which are used to provide protection against speaker blowouts) and alignment delay. These features combined with the Wizard setup system, represent a methodical design that is guaranteed to deliver optimal, all-inclusive processing in a completely scalable system.
? 24 Custom Factory Programs Optimized for Studio Monitor Management ? Dual 28-band Graphic EQ ? Classic dbx? Compressor ? 120A Sub-harmonic Synthesizer ? 2x3, 2x4, 2x5, 2x6 Crossover Configurations ? Stereo Multi-band Parametric EQ ? Stereo Output Limiters ? Alignment Delay ? Pink Noise Generator ? Auto-EQ with 28-Band RTA ? 2-Channel XLR Input and 6 Channel XLR Output ? Front panel RTA-M XLR input with phantom power ? 24-Bit ADC/24-Bit DAC. >110dB Dynamic Range ? TYPE IV? Conversion System ? Full Graphic LCD Display
| Behringer CX-3400 3-Way Stero/4-Way Mono Frequency Crossover with Limiters
The CX3400 is an active frequency crossover enabling 2 or 3-way stereo or even 4-way mono operation. Each band features two 24-dB Linkwitz-Riley filters, as well as individual IGC limiters, while the integrated delay enables flexible time alignment. Polarity switches for each output allow quick and easy runtime compensation for various driver and horn types.2
Respectively:
3-Way stereo or 4-way mono
24 dB / octave Linkwitz-Riley filter
Mono-Sub switchable
LF / HF gain regular / mutable
CD horn EQ switchable
Vertex frequency tunable
Factor switching (10x)
Multi-band limiter switch / variable (threshold)
Limit display each way
LF Delay (max 2ms / 60cm)
Phase reverse
25 Hz subsonic filter, sym
XLR in / out with multiband limiters
Dimensions: 19", 1U, 147 mm case depth
Weight: 1.7 kg | Advanced Feedback Suppression Processor with Full LCD Display
The AFS2 Dual-Channel Advanced Feedback Suppression Processor from DBX protects your ears and audio equipment from annoying and potentially damaging audio feedback without altering your sound. The AFS2 features application-specific filter types for speech, music low, music medium, and music high. The 24 fixed or live narrow-band notch filters are capable of removing frequencies at 1/80 of an octave, ensuring an optimal frequency response without the possibility of feedback.
The front panel features the wizard function to take the guesswork out of setting up any room by incorporating an advanced feedback suppression module and providing a full LCD display for system settings and menus. Additionally, the AFS2 offers a five-segment LED for accurately monitoring input levels for each channel, while the notch filter indicator allows you to monitor the number of filters applied. Dedicated bypass buttons are included to help isolate problem channels. The rear panel offers XLR and 1/4" inputs and outputs, both switchable between +4 and -10 dB operations. A USB port has been provided for firmware updates. The AFS2 ships with a standard IEC power cable.
Number of Channels |
2 |
Inputs |
Connectors: Female XLR and 1/4" TRS
Type: Electronically balanced and unbalanced, RF filtered
Impedance: Balanced 50 kohm, unbalanced 25 kohm
Max Line Level: +20 dBu |
Input CMRR |
>40 dB, typically >55dB @ 1 kHz |
Outputs |
Connectors: Male XLR and 1/4" TRS
Type: Electronically balanced and unbalanced, RF filtered
Impedance: Balanced >120 ohms, unbalanced >60 ohms
Max Level: +20 dBu |
A/D/A Converter |
A/D Converter: DBX type IV conversion system
A/D Dynamic Range: >113 dB A-weighted, >110 dB, unweighted, 22 kHz BW
Type IV Dynamic Range: >119 dB, A-weighted, 22 kHz BW; >117 dB, unweighted, 22 kHz BW
A/D Conversion: 24-bit
Sample Rate: 48 kHz
D/A Dynamic Range: 112 dB A-weighted, 109 dB unweighted
D/A Conversion: 24-bit |
Dynamic Range |
109 dB A-weighted, 106 dB unweighted, 22 kHz BW |
THD + Noise |
0.003% typical at +4 dBu, 1 kHz |
Frequency Response |
20 Hz to 20 kHz, ±0.5dB |
Crosstalk |
Interchannel Crosstalk: >80 dB typical
Crosstalk Input to Output: >80 dB |
Power |
US: 100 to 120 VAC 60 Hz
EU: 220 to 240 VAC 50 Hz
9 W |
Dimensions (HxDxW) |
1.8 x 5.8 x 19.0" / 4.4 x 14.6 x 48.3 cm |
Weight |
4.5 lb / 2.0 kg |
|
Power supply: |
100-240 V AC, 50/60 Hz
6 V DC 800 mA |
Power connection: |
Mains input via Coaxial power connector (M) mounting version power supply cord with AC adapter (provided) |
Frequency range: |
10 - 30000 Hz |
THD: |
<0,005 % at 1 kHz |
DSP: |
Digital signal processor |
Impedance: |
Input: 10 kOhm
Output: 50 Ohm |
Gain: |
Output: -50 dB to +12 dB |
Filter: |
Linkwitz-Riley; Butterworth; Bessel; 6db/oct; 12db/oct; 18db/oct; 24db/oct |
Delay: |
0 - 5 ms |
Dynamic range: |
Input: 114 dB
Output: 110 dB |
Sample rate: |
67 kHz |
Connections: |
Input: line via 2 x 3-pin XLR
Output: line via 6 x 3-pin XLR |
Crossover frequency: |
20-20000 Hz |
Max. level: |
Input: +22 dBu
Output: +9 dBu |
USB port: |
Typ B |
PC connect: |
DXO Software via USB, firmware can be updated |
Housing design: |
(19") 48.3 cm rack installation 1 U |
Dimensions: |
Width: 48,3 cm
Depth: 12,8 cm
Height: 4,45 cm |
Weight: |
1,77 kg |
Operating system: |
Win XP, Win Vista, Win 7, Win 10, OS X 10,5 or better |
|
Based on a two-in, six-out topology, the DC-One is designed primarily for users of small-to-medium sized sound systems in both mobile and installed applications. While the unit is an all-new development based on a powerful SHARC processor, it is 100 percent compatible with all settings from other Electro-Voice signal processors. A large part of DC-Oneʼs development was aimed at ensuring that users can easily handle its serious digital horsepower and high-end audio performance. Free. PC-Editor software is available, or the DC-One can be operated via the front panel.
A/D Conversion 24-Bit Delta-Sigma A/D Conversion 24-bit/sigma-delta (linear phase) 128 times oversampling Analog Inputs 2 XLR (Electronically Balanced), 2 XLR THRU OUT (Electronically Balanced) Analog Outputs 6 XLR (Electronically Balanced) Control Protocol Front Panel USB Connector D/A Conversion 24-bit/sigma-delta 128 times oversampling D/A Conversion 24-Bit Delta-Sigma Data Format 24-Bit Digital Inputs 1 XLR AES/EBU (2 Ch) Dynamic Range 111 dB (unweighted, band limited 22 Hz - 22 kHz) Electronics Type Processor FIR-Drive No Frequency Response 10 Hz - 22 kHz (±0.5 dB) Input Impedance (Balanced) 10 kΩ Internal Processing 32-Bit Floating Point Mains Voltage 100-240 VAC Maximum Input Voltage 8.7 V / +21 dBu (Without -6 dB Analog Pad Engaged) Maximum Output Voltage 8.7 V / +21 dBu Nominal Input Voltage 1.23 V / +4 dBu Nominal Output Voltage 1.23 V / +4 dBu Output Impedance (Balanced) 50 Ω Power Consumption 25 W Sample Rate 48 kHz THD+N < 0.01% (band limited 22 Hz - 22 kHz) Height 1RU 44.45 mm (1.75“) Width 482.6 mm (19“) Depth 355.6 mm (14“) Weight Net 4.6 kg (10.14 lbs) |
The LD DPA260 is a 6-Channel 19" Speaker Processor for our VA-4, VA-8 and UNO-Array with plenty of useful setups for each system
- Type: DSP Controller for Line Array VA-4, VA-8 and UNO
- Model Name: DPA-260
- Description: 6-Channel 19" speaker processor, 32bit DSP, 24bit AD/DA (48 kHz) converter
- Inputs: 2 Channels Analog/Digital, L + R, Noise Gate, the inputs and outputs are freely assignable, that means you can assign any input to any output and vice versa
- Input EQ: 5 Band PEQ, Low Shelf and High Shelf Types available
- Crossover Range: 20 Hz - 20 kHz
- Outputs: 6 Channels, High/Low Pass Filter, Filtertype and dB available, 7 Band PEQ, Low Shelf and High Shelf Types available, Limiter with Threshold, Attack and Release Parameters
- Delay: Time or Meter available, Max. Delay up to 848 ms
- Phase Invert Function: USB Port, Full programmable Software included with 24 Memory Capacity for Presets
- Display: 2 × 16 character LCD with backlight
- Switch mode power supply: 90 V - 250 V
- Dimensions: 19" / 1U
|
Reviews
There are no reviews yet.