DEFINITIVE TECHNOLOGY SuperCube Reference Sub Loudspeaker PIANO GLOSS BLACK

Dimensions | Metric :16-3/4” W x 16-3/4” D x 16-15/16” H | 42.5 x 42.5 x 43.0 cm
Driver Complement :One high-definition 14" long throw woofer, pressure coupled to two 14” low bass radiators
Frequency Response :11 Hz – 200 Hz
Internal Amplifier Power :1800 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :97 lbs | 44.0 kg
Warranty :5 Years; 3 Years for Amplifiers

The SX-120 subwoofer was designed from the ground up by our engineers in London, with a custom-designed 8-inch driver and a powerful 70W RMS amplifier. Components were hand picked by our in-house engineers and then painstakingly voiced to provide premium sound quality

 Features

        Rigid MDF cabinet
        70W RMS amplifier
        8-inch long-throw woofer
        Individual controls to tailor volume, crossover frequency and phase adjustment

 Sensitivity    180mV for full power output
Frequency response    34Hz - 150Hz
Rated output power    70W
Drive units    1 x 8" (203mm) long throw woofer
Crossover    50 - 150Hz continuous/active
Max. power consumption    100W
Colour    Black
Dimensions (WxHxD)    300 x 300 x 310mm (11.8 x 11.8 x 12.2“)
Weight    7.7kg (17lbs)

Length    No
Accessories    Mic, mic stand, remote control
Amplifier    360 watts Dynamic/180 watts RMS Power
Auto On/Off    Yes
Cabinet Design    Extended Excursion Down-firing port
Color    Black Ash Wood Grain
Dimensions: (H/W/D)    14.5" x 13.25" x 14.875" (36.8 x 33.7 x 37.8 cm)
HiPass Crossover    80 Hz*, 6 dB/octave
LoPass Crossover    40-120 Hz adjustable (12 dB octave, 24 dB ultimate)
Phase Control    0, 90, 180, 270 Degrees
Removable Grille    Yes
Shipping Weight    31 lbs. (14 kg)
Size    No
Voice Coil    2-Layer copper
Warranty (N. Am.)    Two years (electronics & drivers - parts & labor)

Impact Series: High Performance, High Value Subwoofers

The down-firing port on the Impact-12 gives more bass output with less distortion than similarly priced subwoofer from other companies. With its 275 watts of amplifier focused on the 29 Hz to 140 Hz frequencies, you get a ton of bass for you dollar. You can blend the Impact-12 with your satellite speakers using the adjustable low pass crossover frequency feature. All this great sound is wrapped up in an attractive black ash wood grain colored cabinet with black gloss trim.

Features

• Compact, stylish cabinet; high-value subwoofer
• High quality, long throw drivers
• 12" forward firing coated fiber woofer
• Down-firing port minimizes distortion
• 2" copper-wound voice coils for exceptional reliability
• “Green” MDP amp rated at 275 watts Dynamic power

Amplifier Output: 1000 watts (RMS) 2000 watts (Peak)
Frequency Response: 16Hz to 40/160Hz variable
Crossover (Low Pass): 40Hz - 160Hz Variable slope characteristic from
12 - 36dB/Octave
Sub-Sonic Filter (High Pass): 16Hz - 31Hz
EQ: 4 x Presets 1 x User Setting
Equalisation: Graphic 9 band Equaliser ±6dB in 0.5dB steps
Volume Level: -80 - 0dB (1dB increments from 0 to -30dB & 2dB
increments from -31 to -80dB)
Auto Sensing Input Requirements: Line Level>5mV (RMS) Variable delay time
5, 10, 15, 20, 25 & 30 minutes
Variable Phase Control: 0. 45. 90, 135, 180, 225, 270 & 315º
Internal Memory: 3 Independent memory locations
Cabinet Specification:
Sealed Cabinet with 25mm thick M.D.F
construction with critical internal bracing
Amplifier Classification:
Class-D amplifier with DSP control
Driver Complement:
1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil

External Dimensions -
Excluding Plinth: Width: 485mm (19 inches)
Height: 455mm (18 inches)
Depth: 475mm (18 3/4 inches)
Weight: 50 Kg (110lbs)
Mains input Voltage: 100 - 240 Vac 50/60Hz (Factory Set)
Trigger Input:
3.5mm Jack input, +12Vdc = On State

User's Manual

AVAILABLE IN THESE COLOR FINISHES