Content |
Dimensions | Metric :16-3/4” W x 16-3/4” D x 16-15/16” H | 42.5 x 42.5 x 43.0 cm
Driver Complement :One high-definition 14" long throw woofer, pressure coupled to two 14” low bass radiators
Frequency Response :11 Hz – 200 Hz
Internal Amplifier Power :1800 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :97 lbs | 44.0 kg
Warranty :5 Years; 3 Years for Amplifiers
|
Technical features 500W class 'D' power amplifier
Description Active closed-box subwoofer system
Drive unit 1x f250mm (10 in) paper / Kevlar® cone long-throw
Frequency range -6dB at 18Hz and 40/140Hz adjustable (EQ at A)
Frequency response ±3dB 25Hz – 40/140Hz adjustable (EQ at A)
Power output: 500W
Rated power consumption: 94W
Input impedance: 33kΩ
Signal / noise: >80dB
Functions: Input Level (line in)
Input Level (speaker in)
Low-pass filter frequency
Low-pass filter bypass (line in only)
Bass extension
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs: Line In (RCA Phono)
Speaker Level In (Binding post)
Low-pass filter Active 4th-order, variable cut-off frequency
Height: 325mm 12.8 in)
Width: 325mm (12.8 in)
Depth: 362mm (14.3 in)
Net weight 15.5kg (34.4 lb)
Cabinet Gloss Black
AVAILABLE IN gloss black,wenge,rozenut COLORS
| Hxείο Sub, high Fidelity, 300 Watts Continuous Program Power (2 hrs) 150 Watts ContinuousPink Noise (2 hrs)200 Watts Continuous Program Power (100 hrs) 100 Watts Continuous Pink Noise (100 hrs), 115dB average, 121dB peak (near corner) 109dB average, 115 dB peak (center of wall) 32 Hz ? 200 Hz +-3dΒ Eπιλογή λειτουργίας 70/100v/, 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru, με 1 woofer 200 mm (8 in) με polypropylene cone, ανάρτηση butyl rubber, με πηνίο φωνής 38 mm (1.5 in) 4-layer copper-clad, και αεριζόμενο former αλουμινίου. Διαστάσεις: 356 x 391 x 203 mm. Περιέχεται βάση στήριξης. Χρώμα Μαύρο-Λευκό. Μπορεί να λειτουργήσει με 2 ή 4 δορυφόρους ?ηχεία, και σε συνδυασμό με ηχεία οροφής της σειράς 40 της JBL. Βάρος 9kg. |
Impact Series: High Performance, High Value Subwoofers
The down-firing port on the Impact-12 gives more bass output with less distortion than similarly priced subwoofer from other companies. With its 275 watts of amplifier focused on the 29 Hz to 140 Hz frequencies, you get a ton of bass for you dollar. You can blend the Impact-12 with your satellite speakers using the adjustable low pass crossover frequency feature. All this great sound is wrapped up in an attractive black ash wood grain colored cabinet with black gloss trim.
Features
- Compact, stylish cabinet; high-value subwoofer
- High quality, long throw drivers
- 12" forward firing coated fiber woofer
- Down-firing port minimizes distortion
- 2" copper-wound voice coils for exceptional reliability
- “Green” MDP amp rated at 275 watts Dynamic power
Length |
No |
Accessories |
N/A |
Amplifier |
165 watts RMS, 275 watts Dynamic Power |
Auto On/Off |
Yes |
Cabinet Design |
N/A |
Color |
Black Ash Wood Grain |
Dimensions: (H/W/D) |
15.1" x 14.2" x 18.9" (38.4 x 36 x 48 cm) |
Frequency Response (+/-3 dB) |
29-140 Hz |
HiPass Crossover |
Full Range |
LoPass Crossover |
50 Hz-200 Hz |
Phase Control |
0, 180 Degrees |
Removable Grille |
Yes |
Shipping Weight |
33 lbs. (15 kg) |
Size |
Large |
Voice Coil |
2" dual layer copper-wound |
Warranty (N. Am.) |
Two years (electronics & drivers - parts & labor) |
|
With the Impact-Mini you get amazing bass in a tiny cabinet that is almost the same size as the MiniVee-8, but at a very budget-friendly price. This engineering marvel is lightweight with an aluminum cone, furniture-quality cabinet finish and concentrates its 300 watts of output power in the 38 Hz to 140 Hz range. This is Velodyne's lightest weight subwoofer and includes an adjustable low pass crossover frequency so you can easily match the Impact-Mini to your satellite speakers.
Features
Compact, stylish cabinet; high-value subwoofer
6.5" active and 8" passive andonized aluminum woofers
High quality, long throw drivers
2" copper-wound voice coil for exceptional reliability
Down-firing bass radiator for more output, less distortion
"Green” MDP amp rated at 300 watts Dynamic power
User's Manual Specifications
|
A subwoofer designed specifically to shine alongside the rest of the BMR-driven Aero speakers, it adds phenomenal amounts of depth and power to your music and movies.
Features
500W power
10" front-firing subwoofer driver
10" down-firing ABR (Auxiliary Bass Radiator)
Premium construction
Rated output power 500W
Frequency response 21Hz - 200Hz
Drivers 1 x 10" (250mm) front-firing subwoofer
1 x 10" (250mm) down-firing ABR
Crossover Active - variable 40Hz - 200Hz
Colour Black
Dimensions (WxHxD) 330 x 340 x 355mm (13.0 x 13.4 x 14.0“)
Weight 11.7kg (25.8lbs) each
|
Reviews
There are no reviews yet.