Content |
Denon AVR-X1700H 7.2ch 8K AV Receiver with 3D Audio, Voice Control and HEOS®
Designed for 4K or 8K setups, the AVR-X1700H delivers the ultimate 3D audio home theater/gaming experiences and supports the latest HDMI specifications.
Powerful, discrete 7-channel amplifier
Delivers maximum performance and 80W per channel to provide the classic and dynamic Denon sound experience.
Advanced 8K HDMI video with eARC support
Three 8K inputs support the latest HDMI specifications—8K/60Hz, select 4K/120Hz pass-through, VRR, Dolby Vision™, HDR10+, ALLM.
Full 3D audio support with virtual surround sound
Enjoy immersive 3D audio with Dolby Atmos®, Dolby Atmos Height Virtualization Technology, DTS:X®, and DTS Virtual:X™.
Enhanced gaming experiences
Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) care for amazing imaging as well as reduced lag and latency
Specifications
- Number of Power Amps: 7
- Power Output (8 ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive): 80 W
- Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive): 120 W
- Power Output (6 ohm, 1 kHz, 1% 1ch Drive): 145 W
- Power Output (6 ohm, 1 kHz, 10% 1ch Drive): 175 W
DTS HD Master / DTS:X |
Yes / Yes |
DTS Neo:X / DTS Neural:X |
No / Yes |
DTS Virtual:X |
Yes |
Dolby TrueHD / Dolby Atmos |
Yes / Yes |
Dolby ProLogic II / Dolby Surround |
No / Yes |
Dolby Height Virtualization |
Yes |
Multichannel Stereo |
Yes |
Dialog Enhancer |
Yes |
Max Number of Processing (Preamp) Channels |
7.1 |
Discrete Power Amplifier |
7 |
Audyssey |
MultEQ XT |
Audyssey Dynamic EQ / Dynamic Volume |
Yes / Yes |
Audyssey APP Support |
Yes |
Speaker Setup Presets |
2 |
Compressed Audio Restorer |
Yes |
HEOS Multiroom and Streaming |
Yes |
Lossy Formats: MP3 / WMA / AAC |
Yes / Yes / Yes |
Lossless Formats: FLAC / ALAC / WAV |
Yes / Yes / Yes |
DSD Audio Streaming |
up to DSD5.6 |
FLAC HD 192/24 |
Yes |
WAV 192/24 |
Yes |
ALAC 192/24 |
Yes |
Gapless playback |
Yes (FLAC, WAV, ALAC, DSD) |
AirPlay 2 |
Yes |
Roon Tested |
Yes |
Internet Radio |
TuneIn |
Spotify Connect* / Tidal* / Deezer* / others * |
Yes / Yes / Yes / Yes |
Amazon Prime Music* / Pandora* |
Yes / Yes |
Compatible with Remote APP for Smart Phones |
Android / iOS |
Compatible with Remote APP for Tablets |
Android / iOS / Amazon Kindle |
Ethernet Ports |
Yes |
Wi-Fi |
Yes |
Bluetooth |
Yes |
Bluetooth Headphone transmission |
Yes |
HDMI Inputs: Back / Front |
6 (3x 8K) / 0 |
HDCP2.3 support |
Yes |
HDMI Outputs: Main / Zone |
1 / No |
HDMI max Resolution (8k / 4k) |
8k/60 - 4k/120 |
HDMI to HDMI Scaling |
up to 8K 60/50 |
HDMI: 8K / 4K / CEC / eARC |
Yes / Yes / Yes / Yes |
HDMI: Dolby Vision / HDR 10+ / Dynamic HDR / HLG |
Yes / Yes / Yes / Yes |
HDMI: ALLM / QMS / QFT / VRR |
Yes / Yes / Yes / Yes |
HDMI pass-though in standby mode |
Yes |
HEOS Multiroom integrated |
Yes |
TV Sound grouping |
Yes |
Multiroom zones |
2 |
Main room multichanel audio - Zone stereo downmix |
Yes |
Zone Audio Source: HDMI / Opt, Coax / Network, USB / Analog |
Yes (2ch) / Yes (2ch) / Yes / Yes |
Zone Audio Output: Speaker / Preout |
Yes / Yes |
Webbrowser Setup |
Yes |
IP Control / RS232 Control / Web Control / App Control |
Yes / No / Yes / Yes |
Remote In / Out |
1 / No |
Voice Control - Works with Amazon Alexa |
Yes |
Voice Control - Google Assist / Apple Siri |
Yes / Yes |
Auto Speaker Setup by Microphone |
Audyssey MultEQ XT |
FL Display |
1 line |
Graphic User Interface - GUI |
Hybrid GUI |
GUI Languages |
3 |
Setup Assistant |
Yes |
Quick Select Plus / Quick Select |
Yes / No |
Firmware Update by: Network / USB |
Yes / Yes |
Variable Cross Over |
Yes |
Optimized Bass Redirection |
Yes |
ECO Mode |
Yes |
Auto Power Off |
Yes |
Sleep Timer |
Yes |
Composite In / Out |
2 / 1 |
Component In / Out |
No / No |
HDMI In / Out |
6 / 1 |
Multi-room Video Out: Video / HDMI |
No / No |
Analogue In/out |
2 / No |
Phono (MM) In |
Yes |
Digital In: Optical / Coaxial |
2 / 1 |
Multi-room Out: Analog / Digital |
Yes / No |
Multichannel Preout |
Yes (0.2) |
Subwoofer Out |
2 |
Speaker Terminal: Gold Plated Screw / Regular Screw |
No / Yes |
Number of Speaker Terminals |
7 |
Speaker A / B |
assignable |
Bi-amp Drive |
assignable |
Multi-Room Speaker Terminal |
assignable |
Front Inputs: Audio / Composite / Digital (Opt) / HDMI / USB |
No / No / No / No / Yes |
USB Audio / Made for iPod / Made for iPhone |
Yes / AirPlay / AirPlay |
Tuner: FM / AM |
Yes / Yes |
Number of Power Amps |
7 |
Power Output (8 ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive) |
80 W |
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive) |
120 W |
Power Output (6 ohm, 1 kHz, 10% 1ch Drive) |
175 W |
Available colors: Black / Premium Silver |
Yes / No |
System Remote Control |
RC-1244 |
Pre-programmed / Learnable / LCD Display |
No / No / No |
Power Consumption in W |
430 |
Power Consumption No-Sound (ECO On / Off) in W |
29 W / 39 W |
Dimensions (W x D x H) |
434 x 339 x 151 mm |
Standby Consumption in W |
0.1 |
CEC Standby Consumption in W |
0.5 |
Network Control On Consumption in W |
2.0 |
Maximum Dimensions w/ Antenna (W x D x H) |
434 x 339 x 151 mm |
Weight in kg |
8.6 |
Carton Maximum Dimensions (W x D x H) in mm |
523 x 435 x 232 |
Carton Weight (inc. product) in kg |
10.6 |
Maximum Dimensions
Antenna: Horizontal: (W x D x H) in Inches
Antenna: Vertical: (W x D x H) in Inches
W/O Antenna: (W x D x H) in Inches |
17.1× 13.3 × 6
( 17.1 x 13.3 x 8.5) |
Weight in LBS |
18.96 |
Carton Maximum Dimensions (W x H x D) in Inches |
20.6 x 17.1 x 9.1 |
Carton Weight (inc. product) in LBS |
23.37 |
|
Features
7.2-Channel AV Receiver Featuring Class D3 (Direct Energy HD) Amplifier, Ultra HD (4K/60p) Upscaling/Pass-through, DSD Playback via Network, Subwoofer EQ, Dual Subwoofer Preout, Built-in AVNavigator, and Insulated Dual Chassis
Main Features
- Direct Energy HD amplifier
- Output Power per Channel 200W
- Impedance at Output Level 4Ω
- Number of Channels 7
- 4Ω Speaker Support
- Signal / Noise Ratio 101 dB
- Input Connections Front:
• 1 x HDMI • 1 x USB 2.0 (iPod/iPhone Digital Audio, USB drive) • 1 x MCACC Setup MIC
Rear: • 6 x HDMI (1 for HDMI/MHL) • 1 x Ethernet • 2 x AV Composite • 1 x Audio (Assignable) • 2 x Digital Coaxial (Assignable) • 2 x Digital Optical (Assignable) • 2 x Component Video(Assignable) • 1 x IR • 1 x USB charge port for AS-WL300 Wireless Converter
- Output Connections Front:
• 1 x Phones out
Rear: • 2 x HDMI (selectable for MAIN ZONE/HDZONE) • 1 x AV Composite • 1 x Monitor Component • 1 x Monitor Composite • 1 x IR • 2 x Preout Subwoofer • 9 x Speaker out
- File Playback • AM/FM Tuner (63 presets)
• Internet Radio with vTuner • Spotify Ready • Apple AirPlay
Via LAN/USB: • MP3, WAV, AAC, WMA, FLAC, AIFF, DSD, and Apple Lossless • iPod Digital Transmission
192 kHz/24-bit audio playback: WAV, FLAC, and AIFF
Multi-channel audio playback (5.0/5.1, 24-bit)(*): WAV, FLAC
Gapless playback: • WAV, FLAC, AIFF, and Apple Lossless(**)
Via HDMI: • SACD
(*) Up to 96 kHz (**) Except multi-channel audio streaming
- MHL Terminal for Android Smartphones
- HD Audio Formats • Dolby TrueHD
• DTS-HD Master Audio
- Audio Return Channel
- Stand-by Pass Through
- Control with HDMI (+)
- On-Screen Display (GUI) Dot Matrix with Album Artwork (HDMI only)
7 languages: • Dutch • English • French • German • Italian • Russian • Spanish
- Sleep Timer
- Firmware updates (via Internet or USB)
- AVNavigator
- Bluetooth (Built-in, with aptX support)
- Internet Radio (vTuner)
- Spotify Connect (+)
- DLNA Certified (+) (v1.5)
- HTC Connect (+)
- Windows 8.1 Compatible
- Remote Control Glow-key, learning remote control
- Eco Mode
Input & Output connections
- Audio/Video Output
- Bi-Amplifier
- Component Video Input/Output 2/1 (assignable)
- Composite Video Input/Output 2/1
- Digital Optical Input/Output 2/- (assignable)
- Digital Coaxial Input/Output 2/- (assignable)
- Ethernet (+)
- HDMI Front Input
- HDMI Input/Output 7 (assignable) / 2
- HDMI version 2.0
- Headphone
- IR In/Out (+) 1/1
- Large speaker terminals
- Pre-amp Output (2.1 ch)
- Speaker A/B Versatile speaker configuration
- USB Host (Front) (+)
Apps
- iControlAV5 (+)
- AVNavigator Built-in
Apple Compatibility
- Works with iPod
- Works with iPhone
- AirPlay Compatible Generations Via USB:
• iPhone 5/5S/5C • iPhone 4/4S • iPhone 3G/3GS • iPhone • iPod touch 5G/4G/3G/2G/1G • iPod nano 7G/6G/5G/4G/3G
- Supported Functions • Audio playback
• On-screen album art • Battery charging
Network Features
- Wireless LAN (optional AS-WL300 adapter required)
- Network Standby
Surround Sound Formats
- Dolby Pro Logic IIz (+)
- Dolby TrueHD (+)
- DTS Neo X
- DTS-HD Master Audio (+)
- Surround Modes (+) 11+1 (Action, Drama, Advanced Game, Sports, Classical, Rock/Pop, Extended Stereo, Front Stage Surround, Sound Retriever AIR, ECO MODE 1, ECO MODE 2 + Phones Surround)
Audio Features
- AM/FM Tuner with RDS
- Tuner Pre-set Stations 63
- Auto Level Control (+) (Multi-channel)
- Auto Surround
- Bass/Treble Tone Controls
- Dialogue Enhancement (+)
- Digital Noise Reduction (+)
- DSD-to-PCM Convertor (2 channel / Multi-channel)
- Dynamic Range Control
- Wide Surround
- Headphone Surround
- Front Stage Surround Advance (+)
- Multizone Function (+) (2)
- Mute Level Setup
- Volume Limit Setup
- Power ON Level Setup
- Phase Control (+)
- Phase Control Plus
- Auto Phase Control Plus
- Automatic Crossover Detection
- MCACC (+) (Advanced)
- Manual MCACC
- PQLS (+) Bit-stream / Multi-surround / 2-channel
- Sound Delay (LipSync) (+)
- Auto Sound Retriever
- Auto Sound Retriever for ARC
- Sound Retriever AIR (+)
- Sound Retriever link
- Standing Wave Control (+)
- Stream Direct (+)
- Symmetric EQ (+)
- Subwoofer EQ
- Virtual Speakers
- Virtual Depth
- Virtual Surround Back (+)
- Virtual Height
- Virtual Wide
- X-Curve (+)
- Polarity Check
Video Features
- Frame Rate Conversion
- Deep Colour (+)
- 3D Ready
- 3D Noise Reduction
- Triple HD Noise Reduction
- x.v.Colour (+)
- Video Scaler
- Upscaling to 1080p
- 4K Pass Through
- 4K Upscaling
- 4K (MAIN ZONE) Up to 4K60p, 4:4:4, 24-bit
- 4K Dual (MAIN/HD ZONE) Up to 4K60p, 4:2:0, 24-bit
- Resolution Parameter • AUTO/PURE
• 480p • 720p • 1080i/ 1080p/ 1080-24p • 4K/4K-24p
- Aspect Through / Normal
- I/P Conversion
- Advanced Video Adjust
- PureCinema
- Stream Smoother
- Stream Smoother Link
- HDMI Standby Through
- HDMI Standby Input Switching
Power Output
- Condition 1kHz, 1% THD
- Rated Power Output • Simultaneous Power Output: 560W all channels
• 6Ω: 160W per channel • 4Ω: 200W per channel
- Input (Sensitivity/Imp.): LINE etc. 380 mV / 47 kΩ
- Signal-to-Noise Ratio: LINE etc. (DIN) 101 dB
- Power Requirements AC 220-230V / 50/60 Hz
- Power Consumption (in use / standby) 290 W / 0.1 W
- Auto Power Down
Construction
- Advanced Direct Construction
- Design • Insulated Dual Chassis
• Rigid Trans-Stabiliser
Amplifier Specifications
- Amplifier Direct Energy HD Amplifier
- Multi-channel Simultaneous Drive
- Digital Signal Processor Texas Instruments AureusTM (TMS320DA808)
- D/A Converter 192 kHz / 24-bit
- A/D Converter 96 kHz / 24-bit
- Hi-bit / Hi-sampling Hi-bit 24 processing
- Dimensions (W x H x D) 435 x 185 x 441 mm
- Weight 14.7 kg
|
Designed for the ultimate music and movie surround sound experience, the Marantz MM8077 7-channel power amplifier delivers power and detail, and is rated at 150 watts per channel into 8 ohms, and 180 watts per channel into 6 ohms.
The power supply features a high current toroidal power transformer along with high power (71WVDC) filter capacitors with a total 100,000µF capacitance to easily handle sharp short-term transient peaks.
|
|
Featuring our unique current feedback discrete power amp output stages that are identical for all channels, the MM8077 is equipped with multiple high current discrete power transistors that feature high slew rate and wide operating bandwidth to extract the most detail from todayʼs high resolution audio formats.
The output devices are mounted on our unique dual extruded aluminum alloy heat sink assembly, configured in a tunnel arrangement that provides both passive and active cooling. The massive heat sinks feature multiple ribbed fins that provide a large passive cooling area, and the assembly is book-ended with a whisper quiet fan that automatically kicks in to provide near silent active cooling when the soundtrack heats up. As the fan is mounted internally directly to the heat sinks, and not externally to the chassis cover as is often the case, even when itʼs running, itʼs designed to be whisper quiet.
|
|
For maximum connectivity, the MM8077 features both unbalanced (RCA) and balanced (XLR) inputs, and each amp channel can be configured to use your choice of input connector. The loudspeaker terminals feature audiophile-grade construction, and are gold-plated for maximum signal transfer, and they can easily handle a wide range of audiophile speaker cable connectors.
|
|
The MM8077 features a DC trigger input for external power on/off control, and thereʼs also dual RC-5 remote control in/out jacks for connection to a compatible Marantz A/V pre-amp/processor.
The copper-plated chassis provides isolation from extraneous noise, and features a multi-layer reinforced bottom panel assembly for maximum rigidity along with triple-layer top cover. Elegantly finished in anodized black satin, the MM8077 features the classic Marantz ringed porthole display with a blue illumination accent that includes a display on/off function.
|
Front Panel | Aluminum/Glass-reinforced resin |
Power Requirement | AC 120 V, 60 Hz |
Power Consumption | 800W (Standby: 0.4W) |
Dimensions W x H x D (Inchs) | 17.32" x 7.29" x 15.1“ |
|
9.2-channel AVENTAGE model with superior three-dimensional sound field playback and the latest, most advanced Surround:AI features. Product available from September
- 9-channel powerful surround sound
- --- 140 W per channel (8 ohms, 20 Hz-20 kHz, 0.06% THD, 2-ch driven)
- --- 220 W per channel (8 ohms, 1 kHz, 10% THD, 1-ch driven)
- --- 220 W per channel (4 ohms, 1 kHz, 0.9% THD, 1-ch driven)
- Surround:AI automatically optimises the surround effect in real time
- Dolby Atmos® and DTS:X™ with CINEMA DSP HD3
- YPAO™-R.S.C. with 3D, multi-point measurement and precision EQ
- Ability to add wireless surround speaker/s* (*MusicCast 20 or MusicCast 50)
- Amazon Alexa voice control compatibility* (*Availability varies by region)
- Highly rigid construction including Anti Resonance Technology (A.R.T.) Wedge?
- High quality parts for optimum performance
- Professional quality digital audio by ESS DAC
- MusicCast multi-room technology
- Music streaming services built-in
- HDMI® (7 in / 3 out) with Dolby Vision™ and Hybrid Log-Gamma
- Phono input for vinyl playback
|
Slim 5.2Ch 4K Ultra HD AV Receiver with HEOS Built-in
Experience exceptional audio performance from the slim profile Marantz NR1510 5.2ch 4K Ultra HD AV receiver that drives elevated surround sound and high-fidelity audio from a compact chassis. At half the height of a traditional AV receiver, the NR1510 features the latest in HDMI connectivity and delivers high-resolution surround sound from Dolby TrueHD and DTS-HD Master Audio. Six HDMI inputs — including one on the front panel — support the latest video and picture formatting and eARC transmission of enhanced audio. Stream music from popular online sources, and easily connect your analog turntable to the receiver to enjoy your vinyl collection. Control the NR1510 with voice control compatibility via Amazon Alexa, Google Assistant and Apple Siri.
Key Features
- Slim profile that’s half the height of a traditional AV receiver delivers exceptional performance and the most musical sound
- 5-channel discrete power amplifier, 50W per channel (8-ohm, 20Hz – 20kHz, 0.08% THD, 2 Ch. drive)
- 6 HDMI inputs with full HDCP 2.3 support
- Supports Dolby Vision, Hybrid Log-Gamma (HLG), eARC and ALLM for enhanced picture and audio
- 4K/60 Hz full-rate pass-through, 4:4:4 color resolution, HDR10 and BT.2020
- Surround format support for Dolby TrueHD and DTS-HD Master Audio
- ALAC, FLAC and WAV lossless file decoding up to 24-bit/192-kHz for high-resolution listening
- HEOS Built-in for multi-room streaming, music streaming and voice control
- Built-in Wi-Fi with 2.4GHz/5GHz dual band support (dual antenna)
- Supports all major voice control agents and streaming services
- Integrated phono input to directly connect your turntable
Power Output (8 ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive) |
50 W |
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive) |
60 W |
Power Output (6 ohm, 1 kHz, 10% 1ch Drive) |
100 W |
|
9.2 Channel Full 4K Ultra HD AV Receiver with 11.2 channel processing, Wi-Fi, Bluetooth®, Dolby Atmos, DTS:X, HDCP2.2/HDR, MultEQ XT32, 8/3 HDMI In/Out, AL32 Multi, L/R Symmetrical Monolithic Amplifier Design
Designed to deliver the ultimate audio and video experience, the AVR-X7200WA is packed with the latest audio, video and networking technologies, including Dolby Atmos surround decoding, which re-creates the stunning three-dimensional soundspace of the latest blockbuster movies.
Featuring built-in Wi-Fi and Bluetooth, the AVR-X7200WA lets you stream music wirelessly from your home network and connected devices, and features Apple AirPlay along with Pandora, SiriusXM, and Spotify Connect music streaming services, as well as internet radio streaming that lets you choose from thousands of internet radio stations around the globe. The built-in AM/FM tuner features HD Radio for superior sound quality.
Number of Power Amps 9
Power Output (8 ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive)
Power Output (8 ohm, 20 Hz - 20 kHz, 0.05% 2ch Drive) 150 W
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive) 190 W
Power Output (6 ohm, 1 kHz, 10% 1ch Drive) 260 W
Metal Front Panel
System Remote Control RC-1194
Pre-programmed / Learnable / LCD Display / /
Power Consumption in W 780
Power Consumption No-Sound (ECO On / Off) in W 70 W / 125 W
Standby Consumption in W 0.1
CEC Standby Consumption in W 0.5
Network Control On Consumption in W 4.5
Maximum Dimensions
Antenna: Horizontal: (W x D x H) in Inches
Antenna: Vertical: (W x D x H) in Inches
W/O Antenna: (W x D x H) in Inches 17.1 x 17.2 x 7.7
17.1 x 17.2 x 10.2
17.1 x 16.9 x 7.7
Weight in LBS 37.7
|
Reviews
There are no reviews yet.