| Content |
Portable USB-DAC and headphone amplifier DA-10 provides Denon's audio performance on par with top sound systems of separate devices in a compact size and equipped with high-capacity rechargeable lithium-ion battery of 3200 mAh, for many hours listening pleasure anywhere, even on the road.
Excellent audio performance from your digital music sources
With many mobile devices, headphone amplifier section is mostly designed for low power consumption for extending battery life. While this is satisfactory with normal headphones with top type headphones, the sound performance suffers.
The DA-10 features advanced analog output stage, with the possibility of treatment of a very wide range of types of headphones, including top type models headset and studio-quality headphones, which are often high impedance and require more power than the output stage.
A mounted sideways gain switch allows you to adjust the gain of the output stage for a perfect combination with your favorite top headphones, including high impedance models, and the final analog output module has a separate power cache circuit for perfect listening experience. There is also the possibility steady output for connection to an external audio system.
High quality audio technologies
Located in an elegant aluminum chassis with solid volume slider aluminum alloy, the DA-10 is equipped with Denon's exclusive technologies for superior music listening experience. With the most sophisticated converting digital signal to analog, the DA-10 is equipped with a heading reference Burr-Brown PCM-1795 32-bit high resolution DAC chip, that can treat multiple sampling frequencies up to 192 kHz, and bit depths up 24 bits. The DA-10 can also decode high-resolution DSD audio tracks (the type found on SACDs), and has the ability to decode DSD files 2.8 and 5.6 MHz.
The AL32 proprietary technology Denon using our inventive DSP digital filtering, sampling upwardly and processing algorithms for converting upwardly and patterning high-resolution digital audio noise at 32 bits, providing drastically improved low-level details and disappearance deformation.
Design Net for music lovers
Equipped with Class Reference Burr-Brown PCM-1795 DAC chip, the DA-10 has a leading manufacture for music lovers, including dual master clock crystals, each optimized for specific sampling frequencies and located right next to the DAC chip on the sound board for maximum reduction in distortion. The digital section features asynchronous treatment USB signal for maximum stability and sound quality, and the DA-10 is equipped with the exclusive Denon AL32 advanced DSP digital filtering and shaping-noise, providing the highest resolution possible with current HD tracks.
There are separate circuit cards for digital audio portion and the power portion for avoiding interference between the steps, and the portion of the D / A converter is capable of decoding the wider range of sampling frequencies (up to 192 kHz) and bit depths (up to 24 bits ).
Compatibility with a wide range of Mobile Devices
The DA-10 is available with many connecting cables for compatibility with the widest variety of portable music players and smartphones. The USB-30 pin cable is compatible with many devices of Apple, including iPod, iPod touch, iPhone and iPad. The USB-Lightning cable is compatible with newer devices of Apple, including the iPhone 5 and 6, iPad Air, and other models with the wiring Lighting.
There is also, USB-micro "B" connector for compatibility with other smart devices, and is also included analog stereo 3.5mm-3.5mm cable to connect to a headphone output of a player, the cables with angled plug for secure connection.
Add and digital connectivity to an existing Hi-Fi system
At home, the DA-10 can still make your analogue Hi-Fi digital-compatible system. Connect the constant-level analog output of the DA-10 to the analog input of your Hi-Fi amplifier, then digital streaming music from your PC via micro USB-B input at high resolution up to 192kHz / 24bit or DSD64 (2.8MHz ) and DSD128 (5.6 MHz).
Long Lasting Battery Life with Battery Indicator
Featuring a high-capacity rechargeable lithium-ion battery of 3200 mAh, the DA-10 provides up to seven hours of continuous operation when connected to your portable music player or smartphone via USB. The multi-charging indicator function with LED lets you know the current battery charge level with the opening. When the battery is between 50% and 100%, flashing green. When the battery level falls between 20% and 49%, the LED blinks orange, and when the level falls below 20%, the LED changes to red, indicating that it is time to recharge.
When connected to a portable player through port 3.5mm, the battery life can be up to 24 hours. The recharge time can be short up to 3.5 hours when plugged into a USB charger with output of 1.5 A.
Sleek and Convenient Carrying Case
The included carrying case has a stylish design and includes two internal pockets for the DA-10 and your portable player or smartphone. The housing accommodates the portable device you have translucent plastic film, so that you can see and directly manipulate your device, there are safety belts to live everything in place. When folded closed, the carrying case also provides protection from mistreatment and even provides some protection against the elements.
With the portable USB-DAC and headphone amplifier DA-10 of Denon, your music will never sound better, and you can enjoy unchanged fidelity to the top headphones can provide. |
The new Fostex HP-A3 is the perfect DAC for Computer Audio. This high quality unit features 32bit D/A Conversion with an integrated headphone amplifier exclusively designed to get the most from and PC audio set-up.
Why settle for 'built-in' D/A conversion when you can drastically improve the quality of your audio with a Fostex HP-A3?
32bit D/A Converter USB Bus power without using unwanted AC adapterWorks with up to 24bit/96kHz audio sourceHigh quality analog headphone amp to drive any type of headphonesEquipped with high-grade AKM 32bit DAC AK4390 - USB Bus power without using unwanted AC adapter
- Works with up to 24bit/96kHz audio source
- Exclusive PLL power supply is built in to reproduce the stable electrical supply
- High quality analog headphone amp to drive any type of headphones
- Equipped with hgih-grade AKM 32bit(*) DAC AK4390
- Condensers and OP amp designed exclusively for audio products
- USB / Digital (Optical) input selector
- Headphones / RCA (Analog) output selector
- Doubles as D/D converter from USB digital audio to Optical
- An USB/AC adapter from the shelf can be used for use as an Optical / Analog converter
Note: When using the USB input, the sampling frequency is fixed at 96kHz. Audio file with Fs 32k/44.1k/48kHz will be reproduced by upsampling to 96kHz and the S/PDIF Out is also fixed at 96kHz.
Input
USB port sampling frequency 16bit-24bit/96kHz
Interface: USB full speed
Digital Connector: optical, square
Format: S/PDIF (32kHz - 96kHz)
Output
Phones Connector: Stereo phone
Max Output: 100mW (32-ohm loaded)
THD: less than 0.01% at 1kHz, 32-ohm loaded, 100mW
Frequency response: 20Hz / 20kHz +-0.3dB (32ohm loaded, 100mW)
Analog Connector: RCA Pin
Reference output level -10dBV
THD: less than 0.01% at 1kHz
Frequency response: 20Hz / 20kHz +-0.3dB
Digital Connector: Optical, square
Format S/PDIF (32kHz - 96kHz)
General
Power: DC5V (via USB port)
Power Consumption: 2.5W
Accessories: 1 x USB cable (1.0m), 4 x rubber foot, manual
Dimensions: 108mm(W) x 36mm(H) x 140mm(D)
Weight: approx. 450g
|
Transit Pro is a super-high resolution USB/DSD (Direct Stream Digital) converter that takes audio signal from your computer and delivers the highest quality digital (optical)/analog signal to any audio component. The key to Transit Proʼs outstanding audio performance is its 32bit/384kHz digital "engine,” which delivers a super-wide bandwidth frequency response, ultra-wide dynamic range and an extremely low noise floor. There are eight user-selectable sampling rates between 44.1 and 384kHz so you can achieve the exact performance level needed for any given circumstance.
Transit Pro has a built-in high quality headphone amplifier with both ¼-inch and 1/8-inch jacks, for connecting any headphones directly without the need for an adapter. Transit Pro is USB-bus-powered or you can use an optional AC wall adapter (not included). Transit Pro is the answer when you need to deliver a reference-quality digital signal from your computer to an external audio component.
Features - Super-high resolution USB to optical/DSD converter
- Eight user-selectable sampling rates: 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384kHz
- Signal-to-noise ratio: 112dB
- Extremely low distortion: THD+N 0.003%
- Digital (optical) and analog outputs
- Direct Stream Digital rates: DSD64, DSD128
- Dual headphone outputs: ¼-inch, 1/8-inch
- Compatible with headphones from 16–600 ohms
- USB-bus-powered or optional AC adapter
Requirements - Minimum System Requirements:
- M-Audio Windows Driver
- Windows 7
- OSx 10.9
| ”It makes a handsome difference to your on-the-go sound.” ’What Hi-Fi?’ 2019 award-winner.
Improve the sound of your smartphone
The Cyrus soundKey uses a top quality DAC (Digital to Analogue Convertor) built into an ultra-low power circuit that lets you hugely improve the sound of your smartphone or tablet without rapidly draining the battery. Using a much better DAC than the one built into most smartphones and tablets means music sounds more dynamic, detailed and true-to-life.
Compatible with Hi-Res music files
A further bonus with the soundKey is that it’s compatible with Hi-Res music files up to 24 bit/96kHz. This means that, as well as MP3 and AAC files, it will also replay your Hi-Res FLAC files. Hi-Res makes the music sound more natural, with subtle detail easier to detect.
Ultra-low power consumption
A key advantage with this DAC over others is the extremely low power consumption. With a battery drain of less than 50 milliamps – under half the maximum recommended by Apple for use with their iOS devices – the soundKey is kind to your phone’s battery. What this means is a much longer phone battery life than when using other mini-DACs. The device itself is also battery-free.
Works with Windows 10, Android 5+ and iOS9+
Compatible with Windows, Android and Apple devices the soundKey is suitable for just about any smartphone. Simply make sure you have the correct USB OTG (On The Go) connection (Apple Camera Kit connection for Apple iOS devices) and you’re good to go.
Compact, robust and light
Crafted using high quality brushed aluminium, the soundKey is both lightweight and strong. Its sleek design combined with its compact dimensions and mere 18g weight make it perfect for music on the move.
Unlock the key to great sound from your smartphone, with the Cyrus soundKey.
Brand Cyrus
Colour Graphite
USB Yes
Weight (KG) 18.1g
Bluetooth No
Dimensions WxDxH (mm) 23 x 8 x 54
High Resolution Audio Yes
Power Consumption- Normal Use Under 50mA
Optical Digital Inputs No
DAC Texas Instruments PCM5102 | Phono preamplifier with A/D converter and USB output
Record Box E: Pure vinyl listening pleasure plus recording functionality!
Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Record Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier.
- Amplification and RIAA equalisation for MM & MC
- Design principle inspired by Dr. Sykora
- Digitalisation of vinyl for recording direct to USB with suitable recording programs
- Automatic recognition, no additional drivers needed
- Runs on Windows®, Mac OS® & Linux operating systems
- SMD circuitry with special low noise components
- Internal metal shielding
- Small size allows installation close to record player
- Gold plated RCA connection sockets
- Outboard power supply included
- Black or White casing
| Input capacitance/input impedance |
MC: 100 ohms/120 pF (low output MC) MM: 47kohms/120 pF (MM or high output MC) |
| Gain, MM / MC |
40 dB / 60 dB |
| Output voltage typically |
300 mV/1 kHz bei 3 mV/1 kHz (MM) oder 0.3 mV/1 kHz (MC) |
| Max. output |
9,5 V (1 kHz) |
| Noise floor MM / MC |
94 dB (A weighted) / 75 dB (A weighted) |
| THD MM / MC |
<0,01% / <0,05% |
| RIAA-equalisation curve accuracy |
20 Hz - 20 kHz / max. 0.5 dB |
| A/D converter |
Burr Brown PCM2904 16-Bit Delta Sigma |
| Sampling rates |
32, 44,1 and 48 kHz |
| USB output |
5 pin Mini b Buchse |
| USB signal |
digital serial data protocol USB 1.1 |
| Operating systems |
Windows XP®, Windows Vista®, Windows 7®, Windows 8®, Mac OS, Linux |
| Input / Line output |
1 pair RCA/Cinch sockets each |
| Outboard power supply |
18 V / 500 mA DC, suitable for your country's mains supply |
| Power consumption |
100 mA DC |
| Dimensions W x H x D (D with sockets) |
120 x 32 x 100 (115) mm |
| Weight |
250g without power supply |
|
The Extremo DAC can be connected via S/PDIF
or AES/EBU to any existing digital source like
CD-player, DAT, CD-transport.
A I2S digital input allows a direct link with
M192 CD-transport for the best audio performance.
CS8416 - a very low jitter 192kHz digital receiver from
Cirrus Logic.
AD1896 - an high dynamic 192/24 upsampler from
Analog
Devices 2 x PCM1792 - 140 dB, 192/24 DAC from Texas
|
Reviews
There are no reviews yet.