| Price | €48.35 Original price was: €48.35.€42.15Current price is: €42.15. incl. GR VAT | €1,612.00 Original price was: €1,612.00.€1,384.99Current price is: €1,384.99. incl. GR VAT | €378.56 Original price was: €378.56.€269.00Current price is: €269.00. incl. GR VAT | €633.80 Original price was: €633.80.€469.00Current price is: €469.00. incl. GR VAT | €4,960.00 Original price was: €4,960.00.€4,255.00Current price is: €4,255.00. incl. GR VAT | €1,240.00 Original price was: €1,240.00.€1,048.99Current price is: €1,048.99. incl. GR VAT |
| Content | ALPS Japan 100mm Studio-K-Fader RSAOK11 single LIN 10kOhm Fader
Professional studio-fader for the application in studio mixing consoles and high end audio equipments.
Mono K-Alps fader lineair
10KOhm,
100mm travel, mounting distance 120mm,
M3 thread mounting holes.
Part number: 10300094
- Part number 4251029600405
- MODEL RSA0K11K-01-B103
- RoHS compliant Yes
- Total resistance 10K ohm
- Number of resistors elements Single-unit
- Resistance characteristic linear (B)
- Travel 100mm
- TotalLength 132.6mm
- Hole spacing 120mm
- Length of lever 9.4mm
- Lever type Lever type 1
- Detent Without
- Rated Voltage 350 V/AC / 20V/DC
- Rated Power 0.25W
- Insulation Resistance 100M Ohm or more at 250V DC
- Operating life 30.000 cycles
Smooth running 100mm track mixing console fader with mounting distance of 120mm and shaft dimensions of 1.2x8mm.
M3 mounting holes.
Used in the following mixingconsoles: AIRLAB, Airmix, Scorpius, Airmax, Cinemix to control VCA\'s | 16-channel Multi-format I/O via a Single Slot
The MY16AE Mini-YGDAI Digital I/O card can be used with Yamaha's DM2000, 02R96, DM1000 and future digital consoles to provide up to 16 channels of simultaneous AES/EBU-format (D-sub 25 pin) I/O via a single expansion slot. All 16 channels can be used independently at sample rates up to 48-kHz, or the MY16AE card can be used for "double channel" connection to 96-kHz recorders providing 8 channels of I/O at 88.2 or 96-kHz.
Connection with 96-kHz recorders
Although the DM2000, DM1000 and 02R96 handle 96-kHz audio as standard, most of the currently available digital recorders can handle 96- kHz audio only in double channel mode (using 2 tracks to make one). In this configuration the DM2000, DM1000 and 02R96 use one channel for one (96-kHz) track, but twice the number of I/O connections must be used. The newly introduced MY16-AT/TD/AE cards can handle 16 channels of 44.1/48-kHz audio or up to 8 channels of 96-kHz audio in double channel mode. With the newest recorders that handle 96-kHz audio as standard (in double speed mode like the DM2000, DM1000 and 02R96) you can make standard connections using the MY8- AE96(S) card. MY8-AE96(S) card can work either in double speed or single speed mode.
Features
- 24bit resolution, 16-in/16-out AES/EBU interface (8-in/8-out at 96kHz)
- 2x D-sub 25 pin connectors
Specifications
| General Specifications |
| Channel Count |
16IN / 16OUT |
| Format |
AES/EBU |
| Connector |
2x D-sub 25 pin |
| Resolution |
24 bit |
|
High-Performance 32-Channel ADAT / Wordclock Expansion Card for X32
- 32-channel ADAT* in/out on 8 fiber-optical connectors (TOSLINK)
- Simultaneous 32-in, 32-out audio streaming
- BNC word-clock in/out for external clock synchronization—in/out switchable
- Perfect for studio and live recordings on HD recorders with ADAT interface
- High-speed 24-bit signal transmission at 48 or 44.1 kHz for ultimate signal integrity
- Light-pipe fiber-optic connections to prevent ground loop interference
- External clock synchronization to any of the 4 Toslink inputs possible
- 3-Year Warranty Program**
- Conceived and designed by BEHRINGER Germany
|
High-Performance 32-Channel Audinate Dante Expansion Card for X32
- 32-channel 48 kHz, bi-directional audio interface for Dante* IP networks
- High-speed 24-bit signal transmission with sample-accurate synchronization and low latency
- Allows interfacing with standard 100 MBit/s or Gigabit network infrastructure with DSCP-based QoS
- Mixed sample and bit rates can coexist on the same network
- Full remote control of X32 possible using the integrated Ethernet switch
- Audinate* Dante Controller application with full control over configuration and signal routing among all Dante-enabled devices
- Dante Virtual Soundcard allows employing your PC or Mac* for IP-based multitrack recording and playback of up to 64 channels (license optionally available at www.audinate.com)
- Secondary connection can be configured for seamless redundant audio networking
- 3-Year Warranty Program**
- Conceived and designed by BEHRINGER Germany
| 8-Channel AES/EBU I/O Card with REF Video Input
The MY8-AEB is an eight-channel digital input/output card that complies with the AES 3id-1995 standard. It provides video input jacks that allow the host device in which the MY8-AEB is installed to be synchronized to a video signal.
In addition to 8 BNC connectors (4 stereo inputs and 4 stereo outputs) the MY8-AEB has a REF Video input that can be used to receive a PAL or NTSC format Reference video (Black Burst) signal that will provide the synchronization word clock for the device into which the card is installed.
Features
- 24bit resolution, 8-in/8-out AES/EBU interface
- 9x BNC connetors: 4x IN, 4x OUT, 1x Reference video input
- “eXi-Clock" synchronization maintenance function
Specifications
| General Specifications |
| Channel Count |
8IN / 8OUT / 1REF Video IN |
| Format |
AES/EBU (AES-3id) |
| Resolution |
24 bit |
| Connector |
8 x BNC(4 x AES In, 4 x AES Out)
1 x BNC (Reference Video In with "eXi-Clock" sync capability) |
*“eXi-Clock" is a function that is capable of seamlessly continuing word clock generation even if the Reference video signal is interrupted. | 96kHz Compatible 8-Channel Analog Output Card
Mini-YGDAI cards make it easy to add I/O in a wide variety of audio and network formats to Yamaha digital mixing consoles, processors, and power amps that are equipped with compatible card slots. Mini-YGDAI cards can give your system the most up-to-date capabilities for any application.
Features
- 24bit resolution, 96kHz compatible 8-out analog audio interface
- 1x D-sub 25 pin connector (balanced)
- Max output level before clip: +18dBu
Specifications
| General Specifications |
| Channel Count |
96kHz compatible 8OUT |
| Format |
Analog |
| Max output level |
+18dBu |
| Sampling frequency |
96kHz |
| Resolution |
24 bit |
| Connector |
1x D-sub 25pin connector |
|
Reviews
There are no reviews yet.