| Price | €48.35 €42.15 incl. GR VAT | €633.80 €469.00 incl. GR VAT | €794.84 €715.00 incl. GR VAT | €2,480.00 €2,269.00 incl. GR VAT | €97.00 €85.00 incl. GR VAT | €1,240.00 €1,048.99 incl. GR VAT |
| Content | ALPS Japan 100mm Studio-K-Fader RSAOK11 single LIN 10kOhm Fader
Professional studio-fader for the application in studio mixing consoles and high end audio equipments.
Mono K-Alps fader lineair
10KOhm,
100mm travel, mounting distance 120mm,
M3 thread mounting holes.
Part number: 10300094
- Part number 4251029600405
- MODEL RSA0K11K-01-B103
- RoHS compliant Yes
- Total resistance 10K ohm
- Number of resistors elements Single-unit
- Resistance characteristic linear (B)
- Travel 100mm
- TotalLength 132.6mm
- Hole spacing 120mm
- Length of lever 9.4mm
- Lever type Lever type 1
- Detent Without
- Rated Voltage 350 V/AC / 20V/DC
- Rated Power 0.25W
- Insulation Resistance 100M Ohm or more at 250V DC
- Operating life 30.000 cycles
Smooth running 100mm track mixing console fader with mounting distance of 120mm and shaft dimensions of 1.2x8mm.
M3 mounting holes.
Used in the following mixingconsoles: AIRLAB, Airmix, Scorpius, Airmax, Cinemix to control VCA\'s |
High-Performance 32-Channel Audinate Dante Expansion Card for X32
- 32-channel 48 kHz, bi-directional audio interface for Dante* IP networks
- High-speed 24-bit signal transmission with sample-accurate synchronization and low latency
- Allows interfacing with standard 100 MBit/s or Gigabit network infrastructure with DSCP-based QoS
- Mixed sample and bit rates can coexist on the same network
- Full remote control of X32 possible using the integrated Ethernet switch
- Audinate* Dante Controller application with full control over configuration and signal routing among all Dante-enabled devices
- Dante Virtual Soundcard allows employing your PC or Mac* for IP-based multitrack recording and playback of up to 64 channels (license optionally available at www.audinate.com)
- Secondary connection can be configured for seamless redundant audio networking
- 3-Year Warranty Program**
- Conceived and designed by BEHRINGER Germany
| Suitable for use with many Soundcraft mixing consoles including:
200SR (24ch), 200B (24ch), 200BVE (8ch), 200 Delta (24ch), Delta AVE (8ch)
DC power connector: 5 pin screw-lock
3 Output rails: +17V, -17V, +48V
Power requirements: 110/120/220/240VAC ±10% 50/60Hz
Input power: 100VA
Dimensions: 483(w) x 195(d) x 89(h)mm
Physical: standard 19" (2u) rack mount kit included
Weight: 5kg |
16-Channel EtherSound Network I/O Card
Mini-YGDAI cards make it easy to add I/O in a wide variety of audio and network formats to Yamaha digital mixing consoles, processors, and power amps that are equipped with compatible card slots. Mini-YGDAI cards can give your system the most up-to-date capabilities for any application.
Features - 24bit resolution,16-in/16-out EtherSound (ES100) interface (8-in/8-out at 96kHz)
- Expandable to up to 64-in/64-out with MY16-EX expansion cards
- 2x etherCON CAT5 connectors for EtherSound I/O, 1x D-sub 9 pin connector for RS232-C, 2x RJ-45 connectors for MY16-EX connection
- Remote setup, patching and monitoring by AVS Monitor
Specifications | General Specifications | | Channel Count | 16IN / 16OUT | | Format | EtherSound | | Resolution | 24 bit | | Connector | 2x EtherCon (for EtherSound),
2x RJ-45 (for MY16-EX),
D-sub 9-pin (for HA remote) |
| Rack Mount Kit for MG12&MG12XU | 96kHz Compatible 8-Channel Analog Output Card
Mini-YGDAI cards make it easy to add I/O in a wide variety of audio and network formats to Yamaha digital mixing consoles, processors, and power amps that are equipped with compatible card slots. Mini-YGDAI cards can give your system the most up-to-date capabilities for any application.
Features
- 24bit resolution, 96kHz compatible 8-out analog audio interface
- 1x D-sub 25 pin connector (balanced)
- Max output level before clip: +18dBu
Specifications
| General Specifications |
| Channel Count |
96kHz compatible 8OUT |
| Format |
Analog |
| Max output level |
+18dBu |
| Sampling frequency |
96kHz |
| Resolution |
24 bit |
| Connector |
1x D-sub 25pin connector |
|
Reviews
There are no reviews yet.