| Content |
DSP-355
ΗΧΟΣΤΗΛΗ AΛΟΥΜΙΝΙΟΥ ΕΞΩΤΕΡΙΚΟΥ / ΕΣΩΤΕΡΙΚΟΥ ΧΩΡΟΥ
EXTRA ΛΕΠΤΟ / SLIM DESIGN
23 W / 70 - 100V
MEΓΑΦΩΝΟ: 3ʼʼ x 5” x 3
TWEETER: 2,5ʼʼ x 1
88 dB@1w / 1m - 99 dB PEAK
ΑΠΟΚΡΙΣΗ ΣΥΧΝΟΤΗΤΑΣ: 140 Hz - 14 KHz
ΧΡΩΜΑ: ΑΣΠΡΟ
ΔΙΑΣΤΑΣΕΙΣ: 59 x 11 x 11 cm
ΒΑΡΟΣ: 3 kg
ΣΤΗΝ ΣΥΣΚΕΥΑΣΙΑ ΠΕΡΙΛΑΜΒΑΝΕΤΑΙ Η ΒΑΣΗ ΣΤΗΡΙΞΗΣ
|
100V bi-directional Sound Projectors with 2 speakers mounted back to back for projecting the sound in two directions. 3 positions selector for adjusting the sound power. They are recommended for music or speech reproduction. Weather-proof design and suitable for indoor and outdoor use.
Technical Info
Input power: RMS 15W
Output power: 3.75, 7.5, 15W
Speaker: Two 5.5" paper
/plastic cone speaker
Input voltage: 50, 70, 100V
Impedance: 100V-2.66K Ohm / 1.33K Ohm
/ 666 K Ohm 70V-1.33K Ohm
/ 666 Ohm / 326 Ohm
50V-666 Ohm / 326 Ohm / 166 Ohm
Freq. resp.: 150~20kHz
S.P.L: 94 dB (1W/M)
Material: ABS resin
|
The BS-634 and BS-634T are wall-mount speakers matched with a supplied plug-in speaker receptacle, for easy installation. The 6W
rated input BS-634/634T are 5" (12cm) cone-type speakers. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A selectable attenuation function is provided on the BS-634T. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible.Enclosure and grille net colour is off-white.
| BS-634 |
|
|---|
| Speaker Component: | 5" (12cm) Cone-type | | Impedance: | 100V LINE: 1.7 kΩ (6W), 3.3 kΩ (3W), | | Sensitivity: | (1w 1m) 90dB | | Frequency Responce: | 120 -20,000Hz | | Input Terminal: | Push-in terminal | | Finish: | Cabinet:HIPS resin, off white, paintable. Grille: SECC, off white, paintable | | Dimensions: | 320(W)x200(H)x85(D)mm |
|
The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.
| SPECIFICATIONS |
|
|---|
| BS-633A | | | Rated Input: | 6W (100V line), 3W (70V line) | | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ(1W) | | Sensitivity | (1W, 1m): 91dB | | Frequency Response: | 120 – 15,000Hz (–20dB) | | Speaker Component: | 5" (12cm) cone-type | | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16) | | Connetion: | Push-in connector (bridging terminal) | | Operating Temperature: | –10°C to 50°C (14°F to 122°F) | | Finish: | Case: ABS resin, off-white | | Rear bord: | Hard board | | Dimensions: | 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) | | Wall Mounting Case front mount: | 184mm (7.24“) | | Dimensions: | Fixing hole mount: 120mm (4.72“) | | Weight: | 780g (1.72 lb) | | Accessory: | Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16(0.16" x 0.63“)) × 2 |
|
F-1000BTWP: 100V weather proof line full range speaker
Weather Proof version of the F-1000BT
IPX4 Water rated
| Specification | Model F-100BTWP | | Enclosure Type | Bass-reflex type | | Rated Input | 15W | | Impedance | 100V line 670Ω(14W), 2kΩ(5W),33kΩ(3W),10kΩ(1W) | | Sensitivity | 87dB (1w,1m) | | Frequency Responce | 85-20,000Hz | | Crossover Frequency | 5kHz | | Directivity Angle | Horizontal 90°, vertical 90° | | Speaker Componenrs | Low frequency 10 cm cone type. High Frequency, Balanced dome tweeter | | Input Terminals | Push-in terminal | | Finish | HIPS, black | | Dimensions | 130(W) × 202(H) × 131(D)mm | | Weight | 2 kg (3.97 lb) (including the supplied brackets) | | Accessories | Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set, Terminal covers x 1, Terminal cover mounting screws. |
|
PRICE IS PER PIECE AND NOT PER PAIR!
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
|
Reviews
There are no reviews yet.