| Content |
The D 8A is the active version of the D 8 offering integrated Class-D power amplifiers, an electronic crossover and loudspeaker equalization.
The D 8A is ideal when combined with active subwoofers for the creation of very compact, active 3-way high-powered systems. For the low- and high frequency ranges, 2x 200 W RMS are available. The maximum overall amplifier output comes to 800 W. The frequency-range is 56 Hz - 20 kHz and the max. SPL is 123 dB / 1m)
The Line input is implemented as an XLR/jack combo socket. In addition an XLR microphone input with a separate level control is available. For operation with powered subwoofers, a switchable low-cut filter is provided.
The extensive range of optional accessories allows virtually unlimited use in fixed installations or flown configurations.
Cabinet Fullrange
Configuration Powered 2-Way
Components 8" / 1“
Rated Power RMS 200 W LF / 200 W HF
Max. Amplifier Output Capability 400 W LF / 400 W HF
max. SPL / 1m 123 dB
Frequency Range (-10 dB) 56 Hz - 20 kHz
Radiation-Pattern H x V 90° x 90°
Dimensions mm (W x H x D) 282 x 442 x 259
Weight 9 kg
|
- 2-way bi-amplified, bass-reflex design
- 200mm (8”) LF woofer with 50mm (2”) voice coil, custom made for FBT
- 25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil
- Frequency response from 65Hz to 20 kHz
- 80°H x 50°V Constant Directivity Rotatable Horn
- optional wall bracket mount thread, 35mm (1 3/8”) top-hat
- one integrated pocket handle
| Code: |
41212 |
| Configuration: |
2 way |
| Built-in amplifier LF/HF: |
700/200 W RMS |
| Built-in amplifier peak LF/HF: |
1400/400 W |
| Frequency response: |
65Hz-20kHz -6dB |
| Low Frequency woofer: |
8 - 2 coil inch |
| High Frequency driver: |
1 - 1.4 coil inch |
| Maximum SPL cont/peak: |
123/131 dB |
| Dispersion: |
80°x50° rotatable HxV |
| Input impedance: |
22 Kohm |
| AC Power requirements: |
640 VA |
| Input connector: |
XLR with loop, RCA ST |
| Power cord: |
5/16.4 m/ft |
| Net Dimension (WxHxD): |
274x500x300 / 10.8x19.7x11.8 mm/inch |
| Net Weight: |
15.6/34.39 Kg/lb |
| Transport Dimension (WxHxD): |
395x620x375 / 15.5x24.4x14.7 mm/inch |
| Transport Weight: |
15.3/33.7 Kg/lb |
|
- 2000W power via ultra-efficient Class-D amplification
- TruSourceTM Technology
- Mackie designed, vertically-aligned, common-magnet TruSource driver
- 8″ LF woofer / 1.75″ HF compression driver
- Incredibly compact, lightweight design
- Powerful TruSource DSP delivers seamless clarity, consistent dispersion and unmatched fidelity
- DL2 Integrated Digital Mixer
- Powerful, one-touch digital mixer with bright OLED screen
- Two highly-versatile input channels with FX
- Independent channel level, 3-band EQ and effects control
- 16 great-sounding channel effects include reverb, chorus and delay
- XLR/TRS combo and dual RCA connectors
- Handles mic, line, stereo and instrument signals
- Unmatched system control for professional applications
- Multi-band feedback destroyer
- Six speaker modes deliver the perfect voicing for your application
- Alignment delay up to 300ms for delay stack, balcony, etc.
- Three memory locations for instant venue setting recall
- Smart Protect DSP dynamically protects amp/driver
- Innovative ultra-compact design
- 1/3 smaller than a traditional 2-way
- Fit an entire DLM system in nearly any car
- Stack them up for storage
- Pole-mountable on tripod or atop DLM12S using SPM300 speaker pole
- Flyable via standard M10 rigging hardware
- Wall-mount them using SWM300 articulated arm for stealthy, powerful install system
- Roadworthy PC-ABS cabinet with pro black finish and ergonomic top carry handle
- Rugged, powder-coated 20 gauge steel grille
- Integrated kickstand delivers perfect angle for personal monitor use
- Ridiculously lightweight (22 lbs. / 10kg)
|
All-in-one portable PA system with full Bluetooth connectivity. Incredibly simple to set-up and use - no technical background required. 40 Watts of powerful, high-quality sound for audiences of up to 250 people. Perfect for parties, schools, corporate and educational presentations, seminars, aerobics, auctioneers, working musicians, tour guides, weddings, etc. . Connect your iPod, iPhone, iPad or any other MP3 player via Bluetooth. High-quality dynamic microphone with cable included. "Wireless ready" for high-quality BEHRINGER digital wireless microphone system (not included). AC & battery operated with up to 12 hours continuous use per battery charge. 2 microphone inputs with individual volume control. Additional Aux input to connect to your CD player. Effective and extremely musical 2-band EQ for perfect sound tuning. Powerful 8" woofer and high-resolution tweeter driven by a Class-D amplifier. Retractable luggage-style handle & sturdy wheels provide effortless transport. Integrated stand mounting with 35 mm pole socket. Weight 9 kgr | User´s Manual
Technical drawing
LD Systems STINGER 28 A G3
Active 2 x 8" 2-way bass-reflex PA speaker
- Active 2 x 8" 2-way bass-reflex PA speaker
- 131 dB max. SPL and 500-watt RMS performance with a highly-efficient digital amplifier
- Perfect all-rounder for full-range, satellite and monitor applications
- Practical presets for fast and user-specific frequency tuning
- Homogeneous dispersion pattern thanks to a BEM-optimised tweeter wave guide
- Two 8" custom woofers and BMS tweeter driver
- Distortion-free sound at even maximum volumes, thanks to DynX® DSP technology
- 2 line/mic input channels with individual gain controllers plus mono mix output
- Birch plywood housing with ultra-robust polyurea coating and M10 rigging points
- Shock-resistant front grille for optimum speaker protection
- 36 mm dual tilt stand attachment with 0° and 5° tilt angle
- Extensive and smart accessories for installation and transport
This highly professional 2-way active system is designed for absolute, long-term reliability. With its rugged bass reflex housing and finely tuned, user-friendly presets, it is suitable for use as a full-range speaker, satellite or monitor. The Stinger® 28 A G3 is powered by a highly efficient Class-D amplifier with a powerful 500-watt continuous output. Its two specially developed 8" woofers and a BMS tweeter driver achieve a powerful bass response and fresh, natural trebles. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflection from floors and ceilings and prevents sidelobe levels, thus achieving controlled and homogeneous dispersion.
LD Systems’ proprietary DynX® DSP technology means that the Stinger® 28 A G3 delivers perfect performance with maximum clarity and power under all conditions. The signal processing of the crossover function and the multi-band limiter achieve an optimal runtime and high freedom from distortion. Designed as an all-around workhorse, the housing of the speaker is made of robust birch plywood. An extremely resilient coating of polyurea offers exceptional robustness and durability. The features include a steel front grille, a dual-tilt stand attachment, flight points and ergonomic handles. The Stinger® 28 A G3 is a good value and attractive solution for professional sound systems, with extensive accessories that support usage on the stage and in fixed installations.
Product type
PA loudspeaker
Type
active
Low/mid driver dimensions
2 x 8 "
Woofer size
2 x 203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Amplifier
Class D
Dispersion (H x V)
90 x 50 °
RMS
500 W
Peak power
1000 W
Frequency response
58 - 20000 Hz
Max. SPL (peak)
131 dB
Protection circuits
Multiband limiter , over voltage , over-current , thermal overload
Input sensitivity
-5 dBu
Controls
2 x gain , 2 x Mic/Line , Mode
Indicators
Limit , Mode , On , Protect (protection circuit engaged) , Signal
Line inputs
2
Line input connectors
6.3 mm jack , XLR
Line outputs
1
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Operating Temperature
0 - 40 °C
Relative Humidity
< 80% (non-condensing)
Cabinet material
12 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
270 mm
Height
756 mm
Depth
290 mm
Weight
20,5 kg |
| User's manual - LDSATG2 [4,73 MB] |
|
|
The LD Systems SAT82AG² is an active installation monitor, which provides a convincing performance on a PC or laptop and as a home studio monitor.
The compact 2-way bass reflex design is equipped with an 8" custom-made woofer and a 1" compression driver which are driven by an 80 Watt Class AB power amplifier. The input is a combo socket; an XLR socket is used to loop through the signal. With a frequency response of 50 Hz - 20 kHz and 114 dB maximum sound pressure, the SAT82AG² produces a balanced sound with high dynamics. The monitor features protection circuits for the tweeter against overcurrent, and a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The cabinet of the SAT82G² is made of 12mm MDF with M6 flight points and is available in black or white with a durable textured paint finish. A versatile mounting bracket is included; a universal joint mount is available as an accessory.
- Product Type: installation monitor
- Type: active
- Woofer Size: 8“
- Woofer Size: 203.2 mm
- Woofer Magnet: ferrite
- Woofer Brand: custom-made
- HF Driver Size: 1“
- HF Driver Size: 25 mm
- HF Driver Magnet: ferrite
- HF Driver Brand: custom-made
- Amplifier (A): Class A/B
- Dispersion Angle (H x V): 60° x 60°
- Power Output (RMS): 80 W
- Frequency Response: 50 Hz - 20,000 Hz
- Max SPL: 114 dB
- Protection: overcurrent, HF drivers
- Controls: volume, power switch (on/off), power mode (on/auto)
- Indicators: Power, Overload
- Line Input Connectors: 6.3 mm TRS, XLR
- Line Output Connectors: XLR
- Power Supply: transformer
- Operating Voltage: 220 V AC - 240 V AC, 50 - 60 Hz
- Cabinet Material: 12 mm MDF
- Cabinet Surface: textured coating
- Cabinet Colour: black
- Cabinet Type: bass reflex
- Width: 274 mm
- Height: 410 mm
- Depth: 243 mm
- Features: wall bracket
|
|
Reviews
There are no reviews yet.