DYNACORD D-8W 2-Way Speaker 250 Watts White

The D 8 is a light-weight, robust 8“/1”, 2-way plastic cabinet for professional sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D 8 is ideally suited to be used in demanding fixed installations.
The cabinet is manufactured from ABS and therefore is extremely resistant against abuse on the road. For low and mid frequencies a DYNACORD DND8200-8 neodymium transducer is used. The Electro-Voice DH3 driver is used for the projection of the high frequencies. The Constant-Directivity HF horn has been integrated into the baffle by CAD methods. The nominal coverage angle of the cabinet is 90°*90°, horizontal*vertical, respectively.
Power handling of the cabinet is 250 W (rated) and 1000W (peak). The maximum sound pressure level is 124 dB, the frequency range of the D 8 is from 65Hz to 20kHz. The D 8 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in high-performance small-format active and passive satellite systems.
Every transducer is protected against short-term thermal overload with thermal cutout switches and halogen protectors. In case of a potential thermal overload the power applied to the speakers is reduced to a safe level. The protection exhibits ʽsoftʼ switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.
Extremely durable acoustic foam mounted to a strong powder-coated steel grille protects the loudspeaker components against any mechanical damage. The trapezoidally shaped enclosure also allows employing the cabinet in monitoring applications. A stable, integrated carrying handle and the integrated stand socket for pole-mount stands allow easy transportation and set-up. A protective cover is available as an optional accessory.

Ειδική έκδοση του AM 7200/95 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
14 σημείων. Πιστοποίηση IP55 κατά πρότυπο IEC
529. Παράδοση κατόπιν παραγγελίας.  

* 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.

    * CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.

    * 2432H High-Frequency Compression Driver

    * PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.

    * Bi-Amp/Passive Switchable.

    * Optional planar array frame kits for a number of array configurations (see AE Series Array Guide).


Frequency Range (-10 dB)       :       260 Hz – 20 kHz

Frequency Response (±3 dB)       :       330 Hz – 18 kHz

Coverage Pattern       :       90°x 50°, rotatable waveguide

Directivity Factor (Q)       :       11

Directivity Index (DI)       :       10.5 dB

Crossover Modes       :       Bi-amp/Passive switchable

Crossover Frequency       :       2.2 kHz

Transducer Power Rating (AES)       :       MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs

Long-Term System Power Rating (IEC)       :       MF/HF: 200 W (800 W peak), 100 hrs

Maximum SPL5       :       Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)

System Sensitivity (1W @ 1m)       :       Passive mode: 108 dB SPL

Nominal Impedance       :       8 ohms

Midrange Driver       :       JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver

Sensitivity (1W @ 1m)
(Midrange)       :       108 dB SPL

High Frequency Driver       :       JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil

Sensitivity (1W @ 1m)
(High Frequency)       :       113 dB SPL

Waveguide       :       PT-K95MH

Enclosure       :       Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood

Suspension Attachment       :       13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware

Finish       :       Black DuraFlex™ finish.
White available upon request.

Grille       :       Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Input Connector       :       NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

Environmental Specifications       :       Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical cabinet orientation)       :       548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)

Net Weight       :       27.2 kg (60 lb)

Optional Accessories       :       M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.

Key Features:
- Compact enclosure
- 205 mm (8 in) LF transducer
- 90° x 50° Progressive Transition™ Field
Rotatable Waveguide with a 25 mm
(1 in) exit compression driver
- Dual Neutrik NL4 connectors plus
screw terminals
- Multiple Attachment Points for Ultimate
Flexibility
 
Specifications:
System:
Frequency Range (-10 dB): 52 Hz - 20 kHz
Frequency Response (+/-3 dB): 63 Hz - 19 kHz
Horizontal Coverage: 90°
Vertical Coverage: 50°
Directivity Factor (Q): 8 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 9 dB (avg. 500 Hz - 16 kHz)
System Sensitivity1: 93 SPL dB/1W/1m
Rated Maximum SPL (1m)2: 117 dB
System Nominal Impedance: 8 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 250 W / 500 W / 1000 W
AES Standard Power Rating4: 375 W
Crossover: 2.1 kHz
Transducers:
Low Frequency Driver: 1 x JBL 228H, 205 mm (8 in) SFG™ driver with 64 mm (2.5 in)
edge wound voice coil
High Frequency Driver: 1 x 2408H-1 25 mm (1 in) exit compression driver, 38 mm (1.5
in) voice coil
High-Frequency Waveguide: PT-D95HF-1 (Field Rotatable)
Physical:
Enclosure: 12 mm and 15 mm exterior grade multi-ply hardwood
plywood
Suspension Attachment: 6 x M8 points; 1 top, 3 bottom, 2 rear.
4 x M6 rear for OmniMount® 30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX available upon request
Grille: Powder coated 16 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 469.9 x 237.5 x 254.0 mm
(18.5 x 9.4 x 10.0 in)
Weight: 12.8 kg (28.2 lb)

Features:

    Contemporary Style, Weather Resistant Enclosure and Components - Ideal for a wide range of applications.
    8-Inch, 2-Way System - in a lightweight, multipurpose enclosure featuring a heavy duty, powder coated aluminum grill.
    IntelliDock™ Intelligent Mounting System - consists of a mounting plate and detachable docking station that incorporates termination points for wiring. Benefits include installation ease and reduced chance of enclosure theft.
    Advanced Directivity™ Rotatable Waveguide -(60° x 90°) enables the loudspeaker to deliver accurately focused sound, regardless of the enclosure's mounted orientation.
    High and Standard Power Versions - Power handling capabilities suitablefor a multitude of environments, with built-in dynamic power protection duringoverload conditions.

Specifications:

    Configuration: Compact 2-way, ported enclosure
    Transducers:
        * Low-Frequency: 8" high power treated paper cone, 2" voice coil, neodymium magnet
        * High-Frequency: 1" high output compression driver
    Frequency Range:
        * Frequency Response (-6 dB): 80 Hz - 21 kHz
        * Useable Frequency Range (-10 dB): 60 Hz - 22 kHz
    Maximum Output:
        * Calculated Peak Output: 119 dB SPL
        * Calculated Continuous Output: 113 dB SPL
    Nominal Impedance: 8 ohms (7 ohm minimum, 210 Hz, 135 ohm maximum)
    Power Rating:
        * RMS Power Handling: 240 W (8 hours IEC), 200 W (100 hours IEC)
        * Recommended Max. Amp Power: 400 W RMS
    Power Limiting: Dynamic, full range power protection circuitry activated by signal overload conditions
    Sensitivity: 90.5 dB, 1 m, free field
    Nominal Coverage (HV): 90° x 60° (-6 dB) rotatable to 60° x 90°
    Transformers:
        * Type: Custom low distortion laminated core, wide bandwidth design
        * 70V Taps: 60, 30, 15, 7.5, W
        * 100V Taps: 60,30, 15, W
    Enclosure:
        * Material: Injection molded, weather resistant, high impact polystyrene
        * Finish: White or black (paintable)
        * Weather Resistant: Yes
        * Grille: Heavy duty powder coated aluminum
        * Connectors: Pair of concealed 5-way binding posts, in conjunction with IntelliDock mounting/connection system
        * Mounting Hardware: AcousticDesign IntelliDock or Yoke Mount options
    Weight: 16.2 lbs. (7.4 kg)

Ειδική έκδοση του AM 7315/95 για χρήση σε
εξωτερικό περιβάλλον και ακραίες καιρικές
συνθήκες με επιπλέον αναβάθμιση 14 σημείων.
Πιστοποίηση IP56 κατά πρότυπο IEC 529.
Παράδοση κατόπιν παραγγελίας.

* 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.

    * CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.

    * 2432H High-Frequency Compression Driver

    * PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.

    * Bi-Amp/Passive Switchable.

    * Optional planar array frame kits for a number of array configurations (see AE Series Array Guide).


Frequency Range (-10 dB)       :       260 Hz – 20 kHz

Frequency Response (±3 dB)       :       330 Hz – 18 kHz

Coverage Pattern       :       90°x 50°, rotatable waveguide

Directivity Factor (Q)       :       11

Directivity Index (DI)       :       10.5 dB

Crossover Modes       :       Bi-amp/Passive switchable

Crossover Frequency       :       2.2 kHz

Transducer Power Rating (AES)       :       MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs

Long-Term System Power Rating (IEC)       :       MF/HF: 200 W (800 W peak), 100 hrs

Maximum SPL5       :       Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)

System Sensitivity (1W @ 1m)       :       Passive mode: 108 dB SPL

Nominal Impedance       :       8 ohms

Midrange Driver       :       JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver

Sensitivity (1W @ 1m)
(Midrange)       :       108 dB SPL

High Frequency Driver       :       JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil

Sensitivity (1W @ 1m)
(High Frequency)       :       113 dB SPL

Waveguide       :       PT-K95MH

Enclosure       :       Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood

Suspension Attachment       :       13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware

Finish       :       Black DuraFlex™ finish.
White available upon request.

Grille       :       Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Input Connector       :       NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

Environmental Specifications       :       Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical cabinet orientation)       :       548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)

Net Weight       :       27.2 kg (60 lb)

Optional Accessories       :       M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.

Key Features:
- Compact enclosure
- Dual 205 mm (8 in) LF transducers
- 90° x 50° Progressive Transition™ Field
Rotatable Waveguide with a 25 mm (1 in) exit
compression driver
- Dual Neutrik NL4 connectors plus screw
terminals
- Multiple Attachment Points for Ultimate
Flexibility

Specifications:
System:
Frequency Range (-10 dB): 53 Hz - 20 kHz
Frequency Response (+/-3 dB): 65 Hz - 20 kHz
Horizontal Coverage: 90°
Vertical Coverage: 50°
Directivity Factor (Q): 8.9 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 7.5 dB (avg. 500 Hz - 16 kHz)
System Sensitivity1: 94 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 120 dB
System Nominal Impedance: 8 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 375 W / 750 W / 1500 W
AES Standard Power Rating4: 700 W
Crossover: 2 kHz
Transducers:
Low Frequency Driver: 2 x JBL 228J, 205 mm (8 in) SFG™ driver with 64 mm (2.5 in)
edge wound voice coil
High Frequency Driver: 1 x 2408H-1 25 mm (1 in) exit compression driver, 38 mm
(1.5 in) voice coil
High-Frequency Waveguide: PT-D95HF-1 (field rotatable)
Physical:
Enclosure: 12 mm and 15 mm exterior grade multi-ply hardwood
plywood
Suspension Attachment: 6 x M8 points; 1 top, 3 bottom, 2 rear.
4 x M8 rear for OmniMount® 60.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX available upon request
Grille: Powder coated 16 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental ratings,
use WRC or WRX.
Dimensions (H x W x D): 679.5 x 237.5 x 254.0 mm
(26.8 x 9.4 x 10.0 in)
Weight: 18.6 kg (40.9 lb)