The P 64 is a modular, networkcompatible audio matrix including signal processing, system monitoring and remote operability.
4 Audio slots can be equipped with 8 channel audio-inpout or output-cards to meet customized requirements. The P64 includes integrated selfmonitoring and supports spare/redundancy concepts in security-relevant systems. Complete recall of stored parameters and confiurations is possible.
300 MIPS computing power – Expandable to 1900 MIPS
Ethernet Interface – Configuration and control via TCP/IP
CAN interface – Communication with up to 100 external devices (e.g. Dynacord PowerH and/or DSA ampifieres)
RS-232 interface – Connection of media controls and building control systems
CobraNet interface – optianal redundant network module
.<br>
<br>
ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 640m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 640m.
</p>
<p>
</p>
Front Panel LED Indicators
<p>
Per Output:4 Independent Six-Segment Lightpipe Output Meters that range from -30 to +20 dBu, Threshold Meters
</p>
<p>
Other:LCD Display provides information about Source Selection, Page Steering, Zone Volume and Mute
</p>
Analog Inputs:
<p>
6 Total (4) Switchable Mic or Line, (2) Unbalanced, Mono-Summed RCA Input Pairs
</p>
<p>
Type:Euroblock (Mic/Line), RCA (Source)
</p>
<p>
Impedance (Euroblock):>50kΩ Balanced, >25kΩ Unbalanced, RF Filtered
</p>
<p>
Impedance (RCA):>25kΩ Unbalanced, RF Filtered
</p>
<p>
Max. Input Line Level:+20dBu Mic/Line, +12dBu RCA
</p>
<p>
CMRR:> 40dB, typically >55db @ 1kHz
</p>
<p>
Mic Pre Gain:30 to 60dB
</p>
<p>
Mic Input Noise (E.I.N.):
</p><p>
Mic Phantom Power:+15VDC
</p>
ANALOG OUTPUTS
<p>
Number of Outputs: 4 Total
</p>
<p>
Type:Electronically Balanced, RF Filtered Euroblock
</p>
<p>
Impedance:120Ω Balanced, 60Ω Unbalanced
</p>
<p>
Max. Output Level:+20dBu
</p>
A/D PERFORMANCE
<p>
Type: dbx Type IV™ Conversion System
</p>
<p>
Dynamic Range line: >113dB, A-weighted, >110dB unweighted
</p>
<p>
Type IV dynamic range:<br>
>119dB, A-weighted, 22kHz<br>
BW: >117dB, unweighted, 22kHz BW
</p>
<p>
Sample Rate: 48kHz
</p>
D/A PERFORMANCE
<p>
Dynamic Range: 112dB A-weighted, 109dB unweighted, 22kHz BW
</p>
SYSTEM PERFORMANCE
<p>
Dynamic Range: >109dB A-weighted, >106dB unweighted, 22kHz BW
</p>
<p>
THD+N: 0.003% typical at +4dBu, 1kHz, 0dB gain
</p>
<p>
Frequency Response: 20Hz – 20kHz, +/- 0.5dB
</p>
<p>
Interchannel Crosstalk: >80dB typical
</p>
<p>
Crosstalk input to<br>
output: >80dB
</p>
<p>
Propagation Delay 0.6 msec
</p>
POWER REQUIREMENTS
<p>
Operating Voltage: 100 VAC, 50/60Hz, 120 VAC, 60Hz, 230VAC 50/60Hz
</p>
<p>
Power Consumption: 29 Watts
</p>
<p>
BTU: </p></td><td>
<p>
Dante is a network technology for multi-channel transmission of digital audio data. The DM-1 compact interface module allows EV's NetMax System Controller to connect to a Dante network, enabling the simultaneous transmission of up to 32 digital audio input signals and 32 digital audio outputs.
</p>
<p>
</p>
<p>
* Designed for Club Sound, Commercial Sound/Life Safety, Concert Sound, House of Worship, Performance & Sports Venues, Pro Music, Stadium Systems, and other applications.<br>
* Gigabit primary and secondary Ethernet interfaces Typical latency: 1 mS Dante Zen device discovery Compatible with Dante Virtual Soundcard <br>
</p></td><td>8-ZONE MUSIC AND ANNOUNCEMENT CONTROL SYSTEM ZONE8 is PROEL's answer for general or zone-selectable announcements and program material. It can manage up to 8 zones and can be configured to use a single amplification system for program material and announcements, or separate amplification for each. The ZONE8 accepts input from up to 18 different microphone control bases connected through a CAT5 interface, can be configured to accept announcement input from telephones through the internal exchange, and can be easily interfaced with alarm systems.
Main features: - 5 selectable program material inputs: Tape, CD, Tuner, AUX1, AUX2 - Level control for announcement inputs - Program material level control - Program material routing selectors for each zone - 'BUSY' LED indicators for active announcements in each zone - Priority microphone input for emergency announcements.</td><td>
<p>
The NAI48-ES is a digital audio network interface that uses the EtherSound network protocol. Digital mixing consoles such as the Yamaha PM5D, M7CL, or LS9 can be connected to AD8HR 8-channel microphone preamp/AD converter or DA824 DA converter units via the NIA48-ES for remote analog input or output interfacing on stage or wherever needed. This type of system eliminates noise problems that are unavoidable with conventional analog console plus multi-cable type setups, and dramatically reduces microphone cable length for superior sound quality. Cabling between the console and "acrobat_reader_logo."){kind=logo}
Reviews
There are no reviews yet.