DYNACORD VariLine VL262 2-Way Fullrange Speaker 300W (White)

The DYNACORD VL262 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL262 is ideally suited to be used in most demanding applications. The VL262 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two ultra-low distortion DND 6130-16 Neodymium transducers are used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.

Order-# D113101 Cabinet Full-Range Configuration passive 2-Way Nominal Impedance 8 ohms Rated Power RMS 300 watts Program Power 600 watts Peak Power 1200 watts SPL 2,83 V/1m 97 dB max. SPL 1m (calc. with Peak) 125 dB Freq. Range (-10 dB) 90Hz - 20Hz Coverage Angle nom. 90° x 40° Passive X-Over Frequency 2,2 kHz VCT Protections Halogen Components HIGH Ev DH 3 Order-# D353078 Components LOW 2x DND 6130-16 Order-# D366420 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF --- Pin Wiring Biamped LF --- Dimensions (WxHxD) mm 217x 543x 230 Net Weight 10 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel, Acoustic Foam

The AC16 is an ultra-compact, fullrange loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and be visually unobtrusive.  The enclosure design allows for installation very close to walls and ceilings, making it ideal for installation under balconies, columns, or for wall mounting.  The high frequency device is a 1" exit compression driver integrated into a 90° x 90° PT™ (Progressive Transition) waveguide that provides even coverage throughout the intended listening area.  The AC16 utilizes a 6.5" Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound 2" voice coil and a copper-capped pole piece that improves performance by reducing voice coil inductance and distortion.
The multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane. Mounting points are provided for an optional U-bracket and for an OmniMount® type bracket.  The AC16 is also equipped with attachment
points located on the bottom of the enclosure for a stand mount accessory.  The plywood enclosure features JBLʼs DuraFlex™ finish and comes with a powder coated steel, foam-backed grille.

Features:
1" Exit Compression Driver with 90° x 90° Coverage PT™waveguide.
6.5" (165 mm) LF transducer
Ultra compact enclosure
400W Program Power
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket, third-party OmniMount® typebracket and stand mount accessory.
Specifications:

Frequency Range (-10 dB): 55 Hz -20 kHz
Frequency Response (±3 dB): 65 Hz -18 kHz
Power Rating:
200W Cont. Pink Noise
400W Program
800W Peak
Impedance: 16 Ohms
Coverage Pattern: 90° x 90°
Dimensions: 15" H x 7.8" W x 8.9" D (381 x 199.4 x 226.1mm)
Weight: 15.8 lbs. (7.2 kg)

PRICE IS PER PIECE AND NOT PER PAIR

• 70 Hz to 23 kHz frequency range (-10 dB)
• 200 watts continuous program power capacity
• 87 dB sensitivity (1W/1m)
• 100° x 100° nominal dispersion
• 60W, 30W, 15W, 7.5W taps at 70V
• 60W, 30W, 15W taps at 100V
• 8 ohms bypass
• 3 kHz crossover frequency
• High-Impact Polystyrene (HIPS) enclosure
• Video shielded for use near video monitors
• Stainless steel grille for harsh environments
• Zinc-plated screw down input terminal strip
• Available in black or white (Control 25AV-WH)
• Dimensions (HxWxD):  236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
• Net Weight:  4.0 kg (9 lb)

The SR-H2S Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.

Specification  Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 180 W
Rated Impedance 8 Ω
Sensitivity 90 dB (1 W, 1 m equivalent, measured at 4 m)
Frequency Response 90 - 17,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜, Vertical: 20゜
Speaker Component 7 cm (2.8“) cone-type × 9
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 663.4 (H) × 115 (D) mm (3.31" × 26.12" × 4.53“)
Weight 4.2 kg (9.26 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206

Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.

Order No. D 113 127 Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish Black 2-component paint Grille Powder coated steel, acoustic foam

Compact design and a wealth of mount-ing options make the RCF Monitor 33T (black) and Monitor 33/WT (white) Compact 2-way loudspeakers ideal for use in business music systems.
The woofer is a high-excursion, carbon fiber design.
The mylar dome tweeter is mounted on a contant directivity horn to provide natural, smooth sound reproduction and high resistance to weather.
Installation of the Monitor 33T is fast and efficient using the accompanying adjustable mounting bracket.
Four M6 threaded inserts add to the speaker's flexibility.
Connections are made to recessed color-coded, spring-loaded terminals.
Wattage taps, voltage adjustments, and 4-ohm operation are selectable by means of two detented rotary switches.
The enclosure is constructed of high density, scratch resistant polystyrene and includes a protective perforated steel grille and connection cover.
The Monitor 33T is a part of RCFʼs Monitor Series, which includes two-way constant directivity, compact speakers in easily installed enclosures.