Weight 5 kg Woofer Diameter 8 Material Polyresin Transformer 15W (100V/70V) Dimensions (WxHxD) 325x290x270 Sensitivity (dB@1m 1W) 89dB Frequency response (-6 dB) 35Hz – 20KHz In-ground Loudspeaker Cabinet ECLER ESSENTIALS eRK108 is an outdoor and cost-effective ground loudspeaker, ready to be installed in gardens, theme parks, leisure facilities, etc. It features an 8″ […]
ECLER ESSENTIALS eRK108 is an outdoor and cost-effective ground loudspeaker, ready to be installed in gardens, theme parks, leisure facilities, etc. It features an 8″ woofer, 0.5″ tweeter and 70/100V transformer.
Applications:
• Theme parks
• Gardens, nature parks and urban spaces
• Leisure centers
• Health and sport centers
• Museums
• Residential buildings, outdoor areas
Weight
5.00 kg
Reviews
There are no reviews yet.
Be the first to review “ECLER eRK108 Outdoor speaker 100V” Cancel reply
In-ground Loudspeaker Cabinet
ECLER ESSENTIALS eRK108 is an outdoor and cost-effective ground loudspeaker, ready to be installed in gardens, theme parks, leisure facilities, etc. It features an 8" woofer, 0.5" tweeter and 70/100V transformer.
Key Features:
• IP65 outdoor rated loudspeaker
• 70/100 V (15 W)
• 8” woofer + 0,5” tweeter
• Stripped wire connection
Applications:
• Theme parks
• Gardens, nature parks and urban spaces
• Leisure centers
• Health and sport centers
• Museums
• Residential buildings, outdoor areas
Weatherproof IP56 outdoor speaker
5.25" woofer
1.2" high-frequency driver
40 watts continuous power
Frequency range up to 15 kHz
Operated at 8 ohms and 100 volts
For gardens, parks etc.
The Contractor COGS 52 is a rugged outdoor speaker in army green with an IP56 rating. It is operated at 8 ohms and 100 volts with taps for 2, 4, 8, 16 and 32 watts and is equipped with a 5.25" woofer and 1" tweeter. It achieves a sound pressure level of 86 dB at 1 W / 1 m with a power capacity of 40 watts of continuous power.
Product type
Installation Loudspeakers
Type
Outdoor Loudspeaker
Version
Outdoor Loudspeaker
Speaker type
2-way speaker
Colour
Army green
Woofer dimensions
5.25 "
Woofer size
133 mm
Tweeter dimensions
1.2 "
Tweeter dimensions (mm)
30 mm
Mounting depth
74 mm
Impedance (low-impedance)
8 Ohm(s)
100 V Inputs
16 W , 2 W , 32 W , 4 W , 8 W
Frequency response
80 - 15000 Hz
Height
372 mm
Diameter
345 mm
Weight
3,88 kg
Crown CDi 1000 2x700W-4Ω Power Amplifier
The Crown? CDi 1000 power amplifi er shall be a solid-state two-channel model with a switch-mode universal power supply. The outputs shall be usable as dual or bridged-mono modes of operation. The bridged-mono mode shall bridge the outputs to provide increased output voltage. Front panel controls and indicators shall include the following: Level: Detented rotary level control, one per channel. Power Switch: On/off switch applies AC power to the amplifi er. Sel/Prev/Next Buttons: Three buttons near the LCD screen shall be used to access menu items and front panel lockout. LCD Screen: Backlit liquid crystal display shows speaker presets and signal processing. Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input. ?10 Indicator: Green LED fl ashes when output signal exceeds ?10 dB below clip. ?20 Indicator: Green LED fl ashes when output signal level exceeds ?20 dB below clip. Ready Indicator: Green LED, one per channel, illuminates when the amplifi er is ready to produce audio. Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion. Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions. Power Indicator: Blue LED illuminates when the amplifi er has been turned on and has power. Rear panel controls and connectors shall include the following: AC Line Connector: NEMA 5-15P (15A). Input Connector: Two 3-pin removable Phoenix-type connectors each accept a balanced line-level input signal. Output Connectors: 4-position barrier strip with connectors for dual louspeakers or bridge-mono loudspeaker. Dual connectors shall work with 2-8 ohm or 70V loads. Bridge-mono connectors shall work with 4-8 ohm or 140V loads. HiQnet USB Connector: Type B, connects to a USB port on a PC. The amplifi er shall have the following specifi cations: Output Power: 2 ohm Dual (per channel): 700W with 1% THD, 4 ohm Dual (per channel): 500W, 8 ohm Dual (per channel) 275W, 4 ohm Bridge-Mono: 1,400W with 1% THD, 8 ohm Bridge-Mono: 1,000W, 70V Dual (per channel): 500W. Voltage Gain at 1kHz, 8 ohm rated output: 30.5 dB. Frequency Response: +0/?1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms. Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode. Sensitivity: 1.4V. Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 100 dB (A weighted). Damping Factor: Better than 500 from 20 Hz to 400 Hz. Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz. Input Stage: Input is electronically balanced and employs precision 1% resistors. Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced. Maximum Input Signal: +22 dBu typical. AC Line Voltage and Frequency Confi gurations Available: 100V, 120V, 220-240V, 50/60 Hz. AC Line Current: 6.5A. At Idle: Draws no more than 90 watts. Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing). The DSP section shall have the following specifi cations: Input EQ: 6 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving fi lters. This 8-fi lter EQ section can be bypassed. Crossover Filters: Highpass and lowpass per channel. Butterworth 6/12/18/24 dB per octave and Linkwitz-Riley 24/48 dB per octave. Also includes ±15 dB bandpass gain and polarity control. Output EQ: 8 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut. This 8-fi lter EQ section can NOT be bypassed. Filters are enabled individually. Delay: Up to 50 msec total delay per channel. Output Limiter: Prevents clipping and protects loudspeakers. Choice of ?3, ?6, or ?12 dB threshold per channel. Presets: 20 presets. 19 are user-definable. Protection shall include the following: CDi-Series amplifi ers shall be protected against shorted, open or mismatched loads; overloaded power supplies; excessive temperature; chain destruction phenomena; excessive output current, and input overload damage. They also protect loudspeakers from input/output DC, large or dangerous DC offsets and turn-on/turn-off transients The chassis shall be steel. Cooling shall be by a proportional speed fan with front-to-rear airfl ow. Dimensions shall be EIA Standard 19-in. rack mount width (EIA RS-310-B), 3.5 in. (8.9 cm) high and 12.25 in. (31.11 cm) deep behind mounting surface. Net weight shall be 19 lb (8.6 kg). Shipping weight shall be 22 lb (10.0 kg). The amplifier shall be designated the Crown CDi 1000.
Description
The Kurv is all about distinction through simplicity. The organic design houses the latest technology. The 5,25” driver with coaxial tweeter is housed in a water-repellent, sloping jacket. You connect the Kurv to many an amplifier and bring it to life. For everyone who wants to be visually and audibly spoiled by a true icon. The Kurv has both a low imedance as well as a 100V connection.
A musical style icon
Standing out with simplicity is what this Kurv speaker does. Its acclaimed organic design houses the latest technology. The 5.25" driver with coaxial tweeter is housed in a water-repellent, undulating jacket. You connect it to many an amplifier and bring it to life. For anyone who wants to pamper their eyee and eare with a true icon.
Water-resistant power
Thanks to its special 5.25" driver, this speaker generates exceptionally warm vibrations outdoors. It can come out particularly powerful. The downfiring ensures a handsome dispersion in 360°.
For home and professional use
This speaker is flexible. You connect it to both a low-impedance and a 100V amplifier. With the latter, you can connect several copies to one amplifier.
Range
< 50 m²
System
2-way
Woofer
5,25" polypropylene cone
Frequency range
75Hz - 20kHz
Tweeter
0,75” silk dome
Sensitivity
85dB
Impedance
6Ω
Composition
LLPDE plastic / aluminium grill
Waterproof
IP66
Amp Power RMS
20 W
Amp power max.
10 W - 100 W
Color
White / quartz
- HIGH POWER, LOW DISTORTION
120W of RMS power with less than 1% THD.
- ADVANCED PROTECTION CIRCUITRY
Thermal and current overload protection, power-on delay and automatic idling circuitry for component and loudspeaker protection.
- BATTERY BACKUP
Can be powered by 24VDC battery for emergency backup and true portability.
- SLIM DESIGN, COMPACT SIZE
Streamlined design fits in a compact 3RU space.
PA- 2312
Rated Output (RMS, THD 1%, 1kHz)
120W
Input Sensitivity/Impedance
1V/10kΩ, Balanced
T.H.D
Less than 1%
S/N
Better than 95dB
High Pass Filter
-3dB at 400Hz
Channel Separation
Less than –70dB
Output Voltage/Impedance
EC, JAPAN: 4Ω/22V, 41Ω/70V, 83Ω/100V
USA/CANADA: 4Ω/22V, 5.2Ω/25V, 41Ω/70V
Power Source
100–120VAC or 220–240VAC; 50/60Hz, 24VDC
Power Consumption(1/8 Power)
290W
Weight
20Kg/44.1Ib
Dimensions
482(W) x 132(H) x 280(D)mm/19(W) x 5.2(H) x 11(H)in
- AUTOMATIC CHARGING
Tapered charging circuitry charges your backup batteries without risk of overcharging.
- EASY BATTERY MONITORING
Integrated digital volt meter and digital ampere meter allow you to monitor the status of your batteries.
PB-607
Battery Requirement
24V DC
Starting Current
3A Max.
Charge Complete Voltage
27.3V ±10%
Operation Temperature
-10℃~+40℃
Power Source
100-120VAC or 220-240VAC; 50/60Hz
(Supplied AC mains transformer depends on country requirements)
Power Consumption
130W
Weight(SET)
7Kg/15.4Ib
Dimension(SET)
482(W) x 88(H) x 280(D)mm/19(W) x 3.5(H) x 11(D)in
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.