The polyphonic SUPEREGO Synth Engine reinvents sample and hold, performs fluid glissandos and creates oscillator like, synthesizer effects. It can stack sounds or create infinite sustain, it even lets you tweak attack and decay, or use its effects loop to invent novel synth patches. Indulge your guilty pleasures!
The polyphonic SUPEREGO Synth Engine reinvents sample and hold, performs fluid glissandos and creates oscillator like, synthesizer effects. It can stack sounds or create infinite sustain, it even lets you tweak attack and decay, or use its effects loop to invent novel synth patches. Indulge your guilty pleasures!
Weight
2.00 kg
Reviews
There are no reviews yet.
Be the first to review “ELECTRO-HARMONIX Superego” Cancel reply
The polyphonic SUPEREGO Synth Engine reinvents sample and hold, performs fluid glissandos and creates oscillator like, synthesizer effects. It can stack sounds or create infinite sustain, it even lets you tweak attack and decay, or use its effects loop to invent novel synth patches. Indulge your guilty pleasures!
Vintage BOSS phasing effects including 4-, 8-, 10-, and 12-stage phasers, plus new "Rise" and "Fall" effects for unidirectional phasing. Tap tempo sync or realtime control of rate via an Expression/Pedal input.
Nominal Input Level
-20 dBu
Input Impedance
1 M ohms
Nominal Output Level
-20 dBu
Output Impedance
1 k ohms
Recommended Load Impedance
10 k ohms or greater
Residual Noise Level
-92 dBu (IHF-A, Typ.)
Connectors
INPUT Jack, OUTPUT Jack, EXP/CTL Jack, AC Adaptor Jack (DC 9 V)
Power Supply
DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor
Current Draw
50 mA (DC 9 V)
Accessories
Dry Battery 9 V type (6F22/9 V)
Options
AC Adaptor (PSA-Series), Expression Pedal (Roland EV-5), Footswitch (FS-5U)
Size and Weight ( incl. battery )
Width
73 mm
2-7/8 inches
Depth
129 mm
5-1/8 inches
Height
59 mm
2-3/8 inches
Weight
420 g
0 lbs. 15 oz.
Tame your tone with the new Snake Charmer Compressor. The result? Silky smooth, mesmerizing tone that behaves as it should. The Snake Charmerʼs compression affects the ratio and threshold of the signal, smoothing out peaks and spikes. At the same time, the Snake Charmer also increases the Gain level to complement the corresponding ratio and threshold settings so that the overall gain remains constant.
Thereʼs also a Gain Reduction Indicator that gives you visual cues of the results of your settings. And a High/Low Switch lets you choose between two overall levels of ratio. The Snake Charmer is equipped with other controls for Attack, which determines how quickly the gain reduction kicks in, and Release, which determines how long the gain is attenuated. Finally, the High-End Emphasis control fine-tunes the amount of compression applied to the top end of the guitar signal.
Power Supply: Four AA alkaline batteries or DC9V AC adapter
Battery Life: Approx. 18 hours
Current Consumption: 95 mA
Dimensions: 168.5 (W) x 155.5 (D) x 64.0 (H) mm / 6.63” (W) x 6.12” (D) x 2.52” (H)
Weight: 1,007 g (excluding batteries / 1,102 g including batteries)
Included Items: Four AA alkaline batteries
The FZ-5 is a modern pedal built for the modern guitarist, but the sounds you can get from the FZ-5 are pure retro. Looking back at the glorious rock sounds of the ʼ60s and ʼ70s, the FZ-5 recreates its vintage fuzz through BOSS state-of-the-art COSM technology. Recall the fuzz-filled flavors of classic pedals such as the Maestro FZ-1A, Fuzz Face, and Octavia pedals, and kick ʼem into overdrive with the FZ-5ʼs Boost knob. BOSS' proprietary COSM technology allows guitar players to recreate classic fuzz BOOST control for more aggressive tone. The FZ-5 is the perfect weapon for players wanting to beef up their rigs with classic retro fuzz artillery.
Vintage sounds inspired by famous fuzz pedals of the ʼ60s and ʼ70s
Uses advanced COSM technology to recreate classic fuzz
BOOST control for more aggressive tone
Road-tough BOSS metal construction
Nominal Input Level
-20 dBu
Input Impedance
1 M ohm
Nominal Output Level
-20 dBu
Output Impedance
1 k ohm
Recommended Load Impedance
10 k ohms or greater
Controls
Pedal switch, LEVEL knob, FUZZ knob, MODE knob
Indicator
CHECK indicator (Serves also as battery check indicator)
Connectors
INPUT jack, OUTPUT jack, AC adaptor jack (DC 9 V)
Power Supply
DC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional)
Current Draw
36 mA (DC 9 V)
Expected battery life under continuous use
Carbon: 3 hours, Alkaline: 10 hours * These figures will vary depending on the actual conditions of use.
Accessories
Owner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), MODE sticker, Dry Battery 006P/9V (6LR61)
Options
AC Adaptor (PSA series)
Size and Weight
Width
73 mm
2-7/8 inches
Depth
129 mm
5-1/8 inches
Height
59 mm
2-3/8 inches
Weight
440 g
1 lbs.
Product Features:
Shape your sound and eliminate feedback with 7 bands of equalization
This BEHRINGER product has been designed to compete head to head with leading products on the market
Wide frequency range from 50 Hz to 10 kHz with a powerful 15 dB boost/cut per band
Status LED for effect on/off and battery check
Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
First-class electronic On/Off switch for noise-free operation
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
How the specific frequency bands of the BEQ700 can shape your sound
50 Hz (sub-bass)
Boost: To thicken up sub-bass content, which is mostly felt rather than heard
Cut: To eliminate stage "rumble” and sub-bass content that can rob sound system power
120 Hz (soft bass)
Boost: To enhance the lower end of the bass spectrum
Cut: To reduce the tendency of low frequency content to overwhelm a small room
400 Hz (hard bass)
Boost: To enhance the "hard” bass punch of fundamental tones
Cut: To reduce punch for better linkage with the kick drum
500 Hz
Boost: or Cut: To control bass clarity and warmth
800 Hz
Boost: To add an aggressive edge to the overall bass sound
Cut: For reducing somewhat nasal or horn-like content
4.5 kHz
Boost: To make the bass cut through the mix. Creates a more distinctive plucked tone
Cut: To eliminate harshness
10 kHz
Boost: To bring out the upper harmonics and add edge to the overall bass tonality
Cut: Apply a cut to reduce harsh high-frequency content or hiss
User's Manual
Studio Quality Effects at Your Feet
Premier recording studios worldwide use Eventide on hit after hit. ModFactor features Eventide's 27 best modulation effects without compromising quality OR flexibility.
Flexibility Built-In
Plug-and-play expression pedal control of wet/dry mix or any combination of parameters. Control program changes and vary parameters continuously via MIDI. Supports instrument or line level inputs and outputs. Plays well with others; adapts seamlessly with a wide variety of amps and other foot pedals.
Obsolescence is so 20th Century
Easy to upgrade; download new software from the Internet and install via USB.
Features
27 of Eventideʼs signature stereo or mono effects:
Liquid Chorus
Shimmer Chorus
Organic Chorus
Negative Phaser
Postive Phaser
BiPhase Phaser
Feedback Phaser
WahWah Q-Wah
Voc-Wah Q-Wah
Positive Flanger
Negative Flanger
Jet Flanger
Thru-o Flanger
Lowpass ModFilter
HiPass ModFilter
BandPass ModFilter
Standard Rotary
Giant Rotary
Bias Tremolo
Opto Tremolo
Modern Vibrato
Vintage Vibrato
Retro Vibrato
Pitch Undulator
Feedback Undulator
Ring (DC) Ringmod
String (AC) Ringmod
Studio quality sound
Software upgradeable via USB 2.0
MIDI control via USB or MIDI in, out/thru
Instant program change
Real-time control with 10 knobs, MIDI, or expression pedal
Tap tempo and MIDI clock sync
40 factory presets, unlimited through MIDI
True analog bypass
Rugged cast metal construction
Reliable metal footswitches for instant preset access
Mono or stereo operation
Guitar or line level inputs and outputs
SPECIFICATIONS:
Analog Input/Output
Input impedance
500K ohms
Output Impedance
470 ohms
Recommended Load Impedance
10K ohms or greater
Connectors
Input 1 (mono)
¼ inch mono phone jack
Input 2
¼ inch mono phone jack
Output 1 (mono)
¼ inch mono phone jack
Output 2
¼ inch mono phone jack
Expression Pedal
¼ inch mono phone jack
Aux Switch
¼ inch stereo phone jack
USB
Type B Socket. Use 2.0 cables only.
MIDI In
Five pin DIN (Female)
MIDI Out/Thru
Five pin DIN (Female)
AC Adapter Jack
Power Supply included (see below)
Physical
Power
9 VDC, 1200 mA, Tip hot (+)
Dimensions
English: 4.8" (H) x 7.5" (W) x 2.12" (D)
Metric: 122 (H) x 190 (W) x 54 (D) mm
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
![acrobat_reader_logo.](http://"images/acrobat_reader_logo.jpeg“/ "acrobat_reader_logo."){kind=logo}
User's Manual
Reviews
There are no reviews yet.