| Content | General
Product type
Loudspeaker Chassis
Overall diameter
309.1 mm
Pitch Circle Diameter
298.5 mm
Cut- out Measurement
282.7 mm
Diameter of fixing holes
6.1 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
70 W
Sensitivity (1 W / 1 m)
100.7 dB
Frequency response
80 - 5000 Hz
Voice Coil Material
copper
Thiele & Small Parameter
Fs (Resonance Frequency)
70 Hz
Re (DC resistance)
6.47 Ohm(s)
Qms (mechanical quality)
11.46
Le (inductance of the voice coil)
0.49 mH
Qes (electrical quality)
0.45
Qts (overall quality)
0.43
Vas (equivalent volume)
71.19
BL (power factor)
13.18 T/m
Xmax (maximum displacement)
0.79 mm
Cms (elasticity of the suspension)
0.19 mm/N
Sd (membrane area)
519.5 cm²
|
For use in 2-way or compact 3-way systems, the 1225 bass and mid range driver has a high sensitivity and excellent power handling characteristics.
General specifications | Nominal diameter (mm/in) | 305/12 | | Power Rating (AES, W rms) | 250 | | Nominal impedance (Ω) | 8 | | Voice coil diameter (mm/in) | 63.5/2.5 | | Magnet type | Ceramic | | Magnet weight (kg/oz) | 1.2/42 | | Chassis type | Pressed steel | | Sensitivity (dB) | 97 | | Frequency range (Hz) | 40-4000 | | Coil material | Round copper | | Former material | Polyimide | | Cone material | Kevlar loaded paper | | Surround material | Cloth-sealed | | Suspension | Single | | Xmax (mm/in) | 2.4/0.09 | | Gap depth (mm/in) | 8.0/0.31 | | Voice coil winding width (mm/in) | 12.7/0.50 | Small Signal Parameters | D (m/in) | 0.26/10.24 | | Fs (Hz) | 63 | | Mmd (g/oz) | 39.60/1.40 | | Mair | | | Qms | 6.70 | | Qes | 0.54 | | Qts | 0.50 | | Re (Ω) | 5.13 | | Vas (lt/ft3) | 54.5/1.92 | | BI (Tm) | 13.20 | | Cms (mm/N) | 0.14 | | Rms (kg/s) | 2.76 | | Le (mH) | | Mounting Information | Overall diameter (mm/in) | 309/12.17 | | Overall depth (mm/in) | 130/5.12 | | Cut-out diameter (mm/in) | 283/11.14 | | Mounting slot dimensions (mm/in) | Ø 7.9/0.31 | | Number of mounting slots | 4 | | Mounting slot PCD range (mm/in) | 297/11.69 | | Unit weight (kg/lb) | 4.1/9.0 | Packed Dimensions and Weight | Single pack size W x D x H (mm/in) | 330 x 330 x 150/13.0 x 13.0 x 5.9 | | Single pack weight (kg/lb) | 3/6.6 | | Multipack (60) size W x D x H (mm/in) | 1080 x 980 x 880/42.5 x 38.6 x 34.6 | | Multipack (60) weight (kg/lb) | 190/419 |
|
Building on the platform of the Blue, the Gold is a higher-powered, Alnico-magnet speaker that recreates the unmistakable sonic signature of a ʽwell played-inʼ original. Over time, the high frequencies of a Blue soften and become less chalky as the cone becomes more flexible – a much sought after characteristic that the Gold exhibits straight out of the box. Also present in the Gold sound from the outset is an added warmth and complexity in the midrange which, coupled with the classic Alnico qualities of a laid-back attack, rounded low end and brilliant belllike highs, deliver huge rhythm voicings and saturated vocal lead tones.
The Gold is a wonderfully expressive and revealing loudspeaker, affording guitarists an unprecedented degree of dynamic control. It has already become a favourite for many working players worldwide whether picking and bending with Brad Paisley, or rocking hard with Danny Spitz of Anthrax.
| General specifications |
|---|
| Nominal diameter | 12“, 305mm | | Power Rating | 50W | | Nominal impedance | 8Ω and 15Ω | | Sensitivity | 100dB | | Chassis type | Pressed steel | | Voice coil diameter | 1.75“, 44.5mm | | Voice coil material | Round copper | | Magnet type | Alnico | | Frequency range | 75-5000Hz | | Resonance frequency, Fs | 75Hz | | DC resistance, Re | 6.4Ω & 11.8Ω | | Mounting Information | | Diameter | 12.2“, 309mm | | Overall depth | 6.5“, 165mm | | Magnet structure diameter | 5.0“, 128mm | | Cut-out diameter | 11.1“, 283mm | | Mounting slot dimensions | 0.31“, 7.9mm Ø | | Number of mounting slots | 4 | | Mounting slot PCD | 11.7“, 297mm | | Unit weight | 9.3lb, 4.2kg |
|
- 98 dB sensitivity 1 W / 1 m
- 500 W + 80 W Power Handling
- 3" Copper Sandwich voice Coil
- Triple Aluminum Demodulating Rings
- Single Point Source providing coherent Wave Front
- Very high SPL, superb Quality Sound
- Optimal for compact 2-way Systems
|
| 700 W continuous program power capacity |
| | 80° nominal coverage |
| | 45 – 18000 Hz response |
| | 99 dB sensitivity |
| | Single Neodymium magnet assembly |
|
Originally created as a higher-power handling variant of the G12M Greenback, the G12-65 is widely regarded as one of the best speakers ever produced for use in a 4x12 cabinet.
With its fast attack and tightly controlled low-end, the G12-65 became a firm favourite in the ʼ80s with hard rock players. The precisely tuned midrange and crisp defined top-end contribute to an aggressive crunch sound that punches through the mix while the mid-range warmth and detail give weight and depth to single notes.
| General specifications |
|---|
| Nominal diameter | 12“, 305mm | | Power Rating | 65W | | Nominal impedance | 8Ω and 15Ω | | Sensitivity | 97dB | | Chassis type | Pressed steel | | Voice coil diameter | 1.75“, 44.5mm | | Voice coil material | Rounded copper | | Magnet type | Ceramic | | Magnet weight | 35oz, 0.99kg | | Frequency range | 80-5000Hz | | Resonance frequency, Fs | 85Hz | | DC resistance, Re | 6.9Ω & 11.8Ω | | Mounting Information | | Diameter | 12.2“, 309mm | | Overall depth | 5.0“, 128mm | | Magnet structure diameter | 5.7“, 145mm | | Cut-out diameter | 11.1“, 283mm | | Mounting slot dimensions | 0.31“, 7.9mm Ø | | Number of mounting slots | 4 | | Mounting slot PCD | 11.7“, 297mm | | Unit weight | 12.1lb, 5.5kg |
|
Reviews
There are no reviews yet.