Content | General
Product type
Loudspeaker Chassis
Overall diameter
309.1 mm
Pitch Circle Diameter
298.5 mm
Cut- out Measurement
282.7 mm
Diameter of fixing holes
6.1 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
70 W
Sensitivity (1 W / 1 m)
100.7 dB
Frequency response
80 - 5000 Hz
Voice Coil Material
copper
Thiele & Small Parameter
Fs (Resonance Frequency)
70 Hz
Re (DC resistance)
6.47 Ohm(s)
Qms (mechanical quality)
11.46
Le (inductance of the voice coil)
0.49 mH
Qes (electrical quality)
0.45
Qts (overall quality)
0.43
Vas (equivalent volume)
71.19
BL (power factor)
13.18 T/m
Xmax (maximum displacement)
0.79 mm
Cms (elasticity of the suspension)
0.19 mm/N
Sd (membrane area)
519.5 cm²
|
- 98 dB sensitivity 1 W / 1 m
- 500 W + 80 W Power Handling
- 3" Copper Sandwich voice Coil
- Triple Aluminum Demodulating Rings
- Single Point Source providing coherent Wave Front
- Very high SPL, superb Quality Sound
- Optimal for compact 2-way Systems
|
Originally created as a higher-power handling variant of the G12M Greenback, the G12-65 is widely regarded as one of the best speakers ever produced for use in a 4x12 cabinet.
With its fast attack and tightly controlled low-end, the G12-65 became a firm favourite in the ʼ80s with hard rock players. The precisely tuned midrange and crisp defined top-end contribute to an aggressive crunch sound that punches through the mix while the mid-range warmth and detail give weight and depth to single notes.
General specifications | Nominal diameter | 12“, 305mm | Power Rating | 65W | Nominal impedance | 8Ω and 15Ω | Sensitivity | 97dB | Chassis type | Pressed steel | Voice coil diameter | 1.75“, 44.5mm | Voice coil material | Rounded copper | Magnet type | Ceramic | Magnet weight | 35oz, 0.99kg | Frequency range | 80-5000Hz | Resonance frequency, Fs | 85Hz | DC resistance, Re | 6.9Ω & 11.8Ω | Mounting Information | Diameter | 12.2“, 309mm | Overall depth | 5.0“, 128mm | Magnet structure diameter | 5.7“, 145mm | Cut-out diameter | 11.1“, 283mm | Mounting slot dimensions | 0.31“, 7.9mm Ø | Number of mounting slots | 4 | Mounting slot PCD | 11.7“, 297mm | Unit weight | 12.1lb, 5.5kg |
|
2000 W continuous program power capacity |
|
100 mm (4 in) copper voice coil |
|
45 – 1000 Hz response |
|
95 dB sensitivity |
|
Aluminium demodulating ring allows a very low distortion figure |
|
Double silicone spider with optimized compliance |
|
Ventilated voice coil gap for reduced power compression |
|
Specification Nominal Diameter 320 (12) mm (in) Nominal Impedance (1) 8 Ohm Minimum Impedence 7.5 Ohm Nominal Power Handling (2) 450 W Continuous Power Handling (3) 900 W Sensitivity (1W/1m) (4) 95 dB Frequency Range 40 - 1000 Hz Voice Coil Diameter 76 (3) mm (in) Winding Material Copper Former Material Glass Fibre Winding Depth 22 (0.9) mm (in) Magnetic Gap Depth 10.5 (0.4) mm (in) Flux Density 1.15 T
Thiele & Small Parameters Fs 42 Hz Re 6.1 Ohm Qes 0.22 Qms 3.8 Qts 0.2 Vas 75 (2.6) dm3 (ft3) Sd 522 (80.9) cm2 (in2) Eta Zero 2.4 % Xmax +/- 7 mm Xvar +/- 9 mm Mms 74 g Bl 23.5 Txm Le 2 mH
Mounting and Shipping Info Overall Diameter 316 mm (12.4 in) Bolt Circle Diameter 296 mm (11.6 in) Baffle Cutout Diameter 282 mm (11.1 in) Depth 140 mm (5.5 in) Flange and Gasket Thickness 16 mm (5/8 in) Net Weight 7.6 kg (16.7 lb) Shipping Weight 8.4 kg (18.5 lb) Shipping Box 340x340x170 mm (13.4x13.4x6.7 in) 1For different impedances, please ask. 22 hours test made with continuous pink noise signal (6 dB crest factor). Power calculated on rated minimum impedance. 3Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. |
400 W continuous program power capacity |
|
90° nominal coverage |
|
50 – 20000 Hz response |
|
98 dB sensitivity |
|
XO-2 dedicated crossover network |
|
Reviews
There are no reviews yet.