EMINENCE EOP18A Omega Pro-18 A 18″ Speaker 800 W 8 Ohms – Alu Basket

• 95 dB Sensitivity 1 W / 1 m
• 1.200 W Power Handling
• 4" Copper Sandwich Voice Coil for low Power Compression
• Neodymium Magnet System
• Double treated Cone for Water Protection
• Triple Aluminum demodulating Rings for ultra low Distortion
• Optimal for high Output Subwoofers
• Leight Weight Carbon Fiber Diaphragm

Nominal Specifications

    Nominal Diameter 18“, 460 mm
    Overall Diameter 18.11“, 460 mm
    Bolt Circle Diameter 17.32“, 440 mm
    Baffle Cutout Diameter 16.61“, 422 mm
    Depth 7.95“, 202 mm
    Flange and Gasket Thickness 0.55“, 13.9 mm


Electrical Specifications

    Minimum Impedance 6.6 Ohm
    Nominal Impedance 8 Ohm
    Nominal Power Handling*** 1,000 W
    Maximum Power Handling**** 2,000 W
    Sensitivity (1W/1m) 99 dB
    Frequency Range 38 - 2500 Hz
    Voice Coil Diameter 4“, 100 mm
    Winding Material Aluminium
    Former Material Glass Fiber
    Winding Depth 0.9“, 23 mm
    Magnetic Gap Depth 0.47“, 12 mm
    Flux Density 1.3 T


THIELE & SMALL Parameters

    Resonant Frequency (fs) 38 Hz
    DC Resistance (Re) 5.5 Ohm
    BL Product (BL) 24.5 N/A
    Diaphragm Mass inc. Airload (Mms) 163 grams
    Mechanical Compliance of Suspension (Cms) 0.11 mm/N
    Rms 4.42 Kg/s
    Electromagnetic Q (Qes) 0.35
    Mechanical Q (Qms) 8.75
    Total Q (Qts) 0.34
    Compliance Equivalent Volume (Vas) 7.37 ft³, 208.8 dm³
    Surface Area of Cone (Sd) 180.7“², 1,166 cm²
    Maximum Linear Excursion (Xmax)* 9.5 mm
    Xdamage** 17.5 mm
    Coil Inductance (Le) 1.36 mH
    Diaphragm mass (Mmd) 141 g
    Eta Zero 3.14 %

Notes

    *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
    **Maximum excursion before permanent damage
    ***2 Hours Test According to AES 2-1984 Rev. 2003
    ****Maximum power is defined as 3dB greater than nominal power

Nominal Diameter     460 mm (18 in)
Overall Diameter     460 mm (18.11 in)
Bolt Circle Diameter     440 mm (17.32 in)
Baffle Cutout Diameter     424 mm (16.7 in)
Depth     202 mm (7.95 in)
Flange and Gasket Thickness     13.9 mm (0.55 in)
Net Weight     4.7 Kg (10.4 lb)
Shipping Box
(Single Carton Box)     536x536x293 mm (21.1x21.1x11.5 in)
Shipping Weight     6 Kg (13.2 lb)

Nominal Impedance     8 Ohm
Minimum Impedance     6 Ohm
Nominal Power Handling ***     600 W
Maximum Power Handling ****     1200 W
Sensitivity (1W/1m)     99 dB
Frequency Range     30÷3150 Hz
Voice Coil Diameter     77 mm (3 in)
Winding Material     Cu
Former Material     Glass Fiber
Winding Depth     22 mm (0.87 in)
Magnetic Gap Depth     10.5 mm (0.41 in)
Flux Density     1.2 T

Fs     30 Hz
Re     5.1 Ohm
Qes     0.34
Qms     8.68
Qts     0.33
Vas     404.2 dm^3 (14.27 ft^3)
Sd     1166 cm^2 (180.7 in^2)
Xmax *     9.25 mm
Xdamage **     17.5 mm
Mms     134.3 g
Bl     19.5 N/A
Le     1.35 mH
Mmd     112.6 g
Cms     0.21 mm/N
Rms     2.91 Kg/s
Eta Zero     3.1 %
EBP     88 Hz
      

• 1400 W continuous program power capacity
• 100 mm (4 in) copper voice coil
• 40 - 2000 Hz response
• 97 dB sensitivity
• Double silicone spider with optimized compliance

• Specifications
  • Nominal diameter460 mm (18.0 in)
  • Nominal impedance8 Ω
  • Minimum impedance6.5 Ω
  • Nominal power handling *700 W
  • Continuous power handling *1400 W
  • Sensitivity (1W/1m) *97.0 dB
  • Frequency range40 - 2000 Hz
  • Voice coil diameter100 mm (4.0 in)
  • Winding materialCopper
  • Former materialGlass Fibre
  • Winding depth21 mm (0.83 in)
  • Magnetic gap depth8 mm (0.31 in)
  • Flux density1.15 T
• Design
  • Surround shapeDouble Roll
  • Cone shapeExponential
  • Magnet materialFerrite
  • SpiderDouble Silicone
  • Pole designStraight Pole
  • Woofer cone treatmentTWP Waterproof Both Sides
  • Recommended enclosure160.0 dm3 (5.65 ft3)
  • Recommended tuning39 Hz
• Parameters *
  • Fs30 Hz
  • Re5.3 Ω
  • Qes0.25
  • Qms8.8
  • Qts0.24
  • Vas297.0 dm3 (10.5 ft3)
  • Sd1134.0 cm2 (175.8 in2)
  • η₀3.1 %
  • Xmax8.0 mm
  • Xvar8.0 mm
  • Mms170 g
  • Bl26.0 Txm
  • Le2.1 mH
  • EBP120 Hz
• Mounting And Shipping Info
  • Overall diameter480 mm (18.0 in)
  • Bolt circle diameter440 mm (17.3 in)
  • Baffle cutout diameter422.0 mm (16.6 in)
  • Depth202 mm (7.95 in)
  • Flange and gasket thickness16 mm (0.62 in)
  • Air volume occupied by driver9.5 dm3 (0.33 ft3)
  • Net weight12.1 kg (26.6 lb)
  • Shipping units1
  • Shipping weight14.0 kg (30.8 lb)
  • Shipping box520x520x240 mm (20.5x20.5x9.4 in)