Eminence Kappa Pro 18 LF 18″ Speaker 1600 W 8 Ohms

• 4'' sandwich voice coil fiberglass former
• Double progressive wave Konex spider
• Cloth suround with DAR technology
• Autoclave waterproof cone treatment
• Balanced neodymium magnet circuit
• Cooling radiator and ventilated voice
• coil to reduce power compression
• 98.1 dB sensitivity

Manual/Εγχειρίδιο 

• 1400 W continuous program power capacity 100 mm (4 in) copper voice coil 30 - 1000 Hz response 95.5 dB sensitivity Double silicone spider with optimized compliance

• 95 dB Sensitivity 1 W / 1 m
• 1.200 W Power Handling
• 4" Copper Sandwich Voice Coil for low Power Compression
• Neodymium Magnet System
• Double treated Cone for Water Protection
• Triple Aluminum demodulating Rings for ultra low Distortion
• Optimal for high Output Subwoofers
• Leight Weight Carbon Fiber Diaphragm

Nominal Specifications

    Nominal Diameter 18“, 460 mm
    Overall Diameter 18.11“, 460 mm
    Bolt Circle Diameter 17.32“, 440 mm
    Baffle Cutout Diameter 16.6“, 422 mm
    Depth 9.09“, 231 mm
    Flange and Gasket Thickness 0.55“, 14 mm


Electrical Specifications

    Minimum Impedance 7.2 Ohm
    Nominal Impedance 8 Ohm
    Nominal Power Handling*** 1,600 W
    Maximum Power Handling**** 3,200 W
    Sensitivity (1W/1m) 98 dB
    Frequency Range 30 - 1500 Hz
    Voice Coil Diameter 4“, 100 mm
    Winding Material Copper
    Former Material Glass Fiber
    Winding Depth 1.23“, 31.3 mm
    Magnetic Gap Depth 0.61“, 15.5 mm
    Flux Density 1.05 T


THIELE & SMALL Parameters

    Resonant Frequency (fs) 32 Hz
    DC Resistance (Re) 5.4 Ohm
    BL Product (BL) 26.7 N/A
    Diaphragm Mass inc. Airload (Mms) 240 grams
    Mechanical Compliance of Suspension (Cms) 0.1 mm/N
    Rms 5.27 Kg/s
    Electromagnetic Q (Qes) 0.37
    Mechanical Q (Qms) 9.3
    Total Q (Qts) 0.36
    Compliance Equivalent Volume (Vas) 6.9 ft³, 195.5 dm³
    Surface Area of Cone (Sd) 182“², 1,174 cm²
    Maximum Linear Excursion (Xmax)* 13 mm
    Xdamage** 28 mm
    Coil Inductance (Le) 1.45 mH
    Diaphragm mass (Mmd) 217 g
    Eta Zero 1.76 %

Notes

    *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
    **Maximum excursion before permanent damage
    ***2 Hours Test According to AES 2-1984 Rev. 2003
    ****Maximum power is defined as 3dB greater than nominal power

Nominal Diameter     460 mm (18 in)
Overall Diameter     460 mm (18.11 in)
Bolt Circle Diameter     440 mm (17.32 in)
Baffle Cutout Diameter     424 mm (16.7 in)
Depth     202 mm (7.95 in)
Flange and Gasket Thickness     13.9 mm (0.55 in)
Net Weight     4.7 Kg (10.4 lb)
Shipping Box
(Single Carton Box)     536x536x293 mm (21.1x21.1x11.5 in)
Shipping Weight     6 Kg (13.2 lb)

Nominal Impedance     8 Ohm
Minimum Impedance     6 Ohm
Nominal Power Handling ***     600 W
Maximum Power Handling ****     1200 W
Sensitivity (1W/1m)     99 dB
Frequency Range     30÷3150 Hz
Voice Coil Diameter     77 mm (3 in)
Winding Material     Cu
Former Material     Glass Fiber
Winding Depth     22 mm (0.87 in)
Magnetic Gap Depth     10.5 mm (0.41 in)
Flux Density     1.2 T

Fs     30 Hz
Re     5.1 Ohm
Qes     0.34
Qms     8.68
Qts     0.33
Vas     404.2 dm^3 (14.27 ft^3)
Sd     1166 cm^2 (180.7 in^2)
Xmax *     9.25 mm
Xdamage **     17.5 mm
Mms     134.3 g
Bl     19.5 N/A
Le     1.35 mH
Mmd     112.6 g
Cms     0.21 mm/N
Rms     2.91 Kg/s
Eta Zero     3.1 %
EBP     88 Hz