| Price | €453.80 €330.13 incl. GR VAT | €163.30 €129.59 incl. GR VAT | €217.36 €170.75 incl. GR VAT | €150.03 €135.03 incl. GR VAT | €195.50 €153.00 incl. GR VAT | €183.00 €166.50 incl. GR VAT |
| Content | Specifications
Product type
Loudspeaker Chassis
Overall diameter
260.35 mm
Pitch Circle Diameter
247.14 mm
Cut- out Measurement
231.65 mm
Diameter of fixing holes
6.5 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
400 W
Sensitivity (1 W / 1 m)
92 dB
Frequency response
50 - 3700 Hz
Voice Coil Material
copper
Depth of the magnetic gap
9.27 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
52 Hz
Re (DC resistance)
5.71 Ohm(s)
Qms (mechanical quality)
5.87
Le (inductance of the voice coil)
0.62 mH
Qes (electrical quality)
0.3
Qts (overall quality)
0.28
Vas (equivalent volume)
41.41
BL (power factor)
16,8 T/m
Xmax (maximum displacement)
6.58 mm
Cms (elasticity of the suspension)
0.21 mm/N
Sd (membrane area)
376.9 cm²
| |
DELTA-10A Series Standard American
Recommended for professional audio and bass guitar applications as a woofer/mid-bass or mid-range in vented monitors, satellites and multi-way enclosures.
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
10 "
Nominal Diameter
254 mm
Voice Coil
2.5 "
Voice Coil
63.5 mm
Overall diameter
256.2 mm
Pitch Circle Diameter
245.4 mm
Cut- out Measurement
232.4 mm
Diameter of fixing holes
6.4 mm
Depth
108 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
350 W
maximum rated load
700 W
Sensitivity (1 W / 1 m)
98.8 dB
Frequency response
63 - 3700 Hz
Voice Coil Material
Aluminium
Magnet
Ferrite
Depth of the magnetic gap
9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
66 Hz
Re (DC resistance)
5.42 Ohm(s)
Qms (mechanical quality)
6.53
Le (inductance of the voice coil)
0.74 mH
Qes (electrical quality)
0.35
Qts (overall quality)
0.33
Vas (equivalent volume)
30.5
Mms (moving mass)
32 g
BL (power factor)
14.4 T/m
Xmax (maximum displacement)
3.5 mm
Cms (elasticity of the suspension)
0.18 mm/N
Sd (membrane area)
344.9 cm²
Weight
5,17 kg
|
High efficiency mid-bass, 2.5” aluminium voice coil,
with very flat response up to 4 kHz.
Specifications
Nominal Diameter 250 mm (10 in.)
Nominal Impedance 8 Ω
Minumum Impedance 6.9 Ω
Power Handling
(60 –600 Hz)
Nominal1 250 W
Continuous Program2 500 W
Sensitivity (1W/1m)3 99 dB
Frequency Range 60-4000 Hz
Voice Coil Diameter 65 mm (2.5 in.)
Winding Material Aluminium
Former Material Glass Fibre
Winding Depth 12 mm (1/2 in.)
Magnetic Gap Depth 8 mm (5/16 in.)
Flux Density 1.25 T
Also available in 16 Ω, data upon request
Thiele & Small Parameters4
Fs 60 Hz
Re 5.7 Ω
Qes 0.19
Qms 6.3
Qts 0.18
Vas 37 dm.3 (1.3 cu. ft.)
Sd 320 cm.2 (49.1 sq. in.)
η0 4.1 %
X max ± 2.4 mm.
Mms 27 gr.
Bl 17.7 Tm
Le 1.3 mH
Mounting and Shipping Informations
Overall Diameter 260 mm. (10.2 in.)
Bolt Circle Diameter 244 mm. (9.6 in.)
Baffle Cutout Diameter 228 mm. (8.8 in.)
Depth 110 mm. (4.3 in.)
Flange and Gasket Thickness 17 mm. (2/3 in.)
Net Weight 7.1 Kg. (15.6 lb.)
Shipping Weight 7.8 Kg. (17.2 lb.)
Shipping Box 320x320x160 mm
(12x12x6.3 in.)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range . Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 200 to 4000 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test.
| |
- 3'' sandwich voice coil fiberglass former and aluminium winding
- Progressive wave Konex spider
- Cloth surround with DAR technology
- Cone waterproof treatment
- Ventilated voice coil to reduce power compression
- BMF ferrite magnet
- 95.8 dB sensitivity
|
Reviews
There are no reviews yet.