Eminence TRAVIS TOY DOUBLE T15 15″ Loudspeaker 300 W 8 Ohm

No longer available!

350.97 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: ERDT15A Category:

15″ Loudspeaker 300 W 8 Ohm

Rated at 300 watts, the Travis Toy Signature Double-T 15 pedal steel guitar speaker features a tight low end, a midrange bite that can cut through a mix, and detailed high end without being too bright. Travis worked closely with the engineers at Eminence to achieve these characteristics and even managed to pack them all into a 15 inch speaker that weighs just over 9.9 lbs – less than half the weight of the speakers he replaced.

15″ Loudspeaker 300 W 8 Ohm

Rated at 300 watts, the Travis Toy Signature Double-T 15 pedal steel guitar speaker features a tight low end, a midrange bite that can cut through a mix, and detailed high end without being too bright. Travis worked closely with the engineers at Eminence to achieve these characteristics and even managed to pack them all into a 15 inch speaker that weighs just over 9.9 lbs – less than half the weight of the speakers he replaced.

 

Read more

Specifications

Product type
Loudspeaker Chassis
Type
Passive
Nominal Diameter
15 “
Nominal Diameter
381 mm
Voice Coil
3 “
Voice Coil
76 mm
Overall diameter
398.1 mm
Pitch Circle Diameter
7.1 mm
Cut- out Measurement
369.8 mm
Diameter of fixing holes
7.1 mm
Depth
168.3 mm
Nominal Impedance
4 Ohm(s)
Nominal Load Capacity
300 W
Sensitivity (1 W / 1 m)
101 dB
Frequency response
50 – 33000 Hz
Voice Coil Material
copper
Magnet
Neodymium
Thiele & Small Parameter
Fs (Resonance Frequency)
56 Hz
Re (DC resistance)
3.18 Ohm(s)
Qms (mechanical quality)
9.71
Le (inductance of the voice coil)
0.4 mH
Qes (electrical quality)
0.34
Qts (overall quality)
0.33
Vas (equivalent volume)
111.97 liters / 3.95 cu.ft.
Mms (moving mass)
74 g
BL (power factor)
15.76 T/m
Xmax (maximum displacement)
1.4 mm
Cms (elasticity of the suspension)
0.11 mm/N
Sd (membrane area)
856.3 cm²
Weight
3,49 kg
Weight 3.6 kg
Woofer Inch

Reviews

There are no reviews yet.

Be the first to review “Eminence TRAVIS TOY DOUBLE T15 15″ Loudspeaker 300 W 8 Ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

Eminence TRAVIS TOY DOUBLE T15 15" Loudspeaker 300 W 8 Ohm removeB & C Speakers 15-NW76 Woofer Neodymium ring magnet 15 inch, 600W,100.5dB removeJBL 2226J 15" High-Power LF Driver 16 Ohm removeEMINENCE ED15C Delta-15 - 15" Speaker 400 W 4 Ohms removeEMINENCE Delta 15 LFA 15" Speaker 500 W 8 Ohms removeB & C Speakers 15-CXN76 SPEAKER coaxial NEODYMIUM With 15" woofer, 8Ω,400W Nominal, 800W continuous, 99dB remove
NameEminence TRAVIS TOY DOUBLE T15 15" Loudspeaker 300 W 8 Ohm removeB & C Speakers 15-NW76 Woofer Neodymium ring magnet 15 inch, 600W,100.5dB removeJBL 2226J 15" High-Power LF Driver 16 Ohm removeEMINENCE ED15C Delta-15 - 15" Speaker 400 W 4 Ohms removeEMINENCE Delta 15 LFA 15" Speaker 500 W 8 Ohms removeB & C Speakers 15-CXN76 SPEAKER coaxial NEODYMIUM With 15" woofer, 8Ω,400W Nominal, 800W continuous, 99dB remove
ImageERDT15A Eminence TRAVIS TOY DOUBLE T15 15 inch Loudspeaker 300 W 8 Ohm hxeio speaker artsound woofer megafwno
SKUERDT15A15-NW762226JED15CED15LFA15-CXN76
Rating
Price 350.97 incl. GR VAT 367.00 incl. GR VAT 469.00 incl. GR VAT 155.00 incl. GR VAT285.19 incl. GR VAT 663.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Only 3 left in stock

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderOnly 3 left in stockAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description

15" Loudspeaker 300 W 8 Ohm

Rated at 300 watts, the Travis Toy Signature Double-T 15 pedal steel guitar speaker features a tight low end, a midrange bite that can cut through a mix, and detailed high end without being too bright. Travis worked closely with the engineers at Eminence to achieve these characteristics and even managed to pack them all into a 15 inch speaker that weighs just over 9.9 lbs - less than half the weight of the speakers he replaced.
Content

Specifications

Product type
Loudspeaker Chassis
Type
Passive
Nominal Diameter
15 "
Nominal Diameter
381 mm
Voice Coil
3 "
Voice Coil
76 mm
Overall diameter
398.1 mm
Pitch Circle Diameter
7.1 mm
Cut- out Measurement
369.8 mm
Diameter of fixing holes
7.1 mm
Depth
168.3 mm
Nominal Impedance
4 Ohm(s)
Nominal Load Capacity
300 W
Sensitivity (1 W / 1 m)
101 dB
Frequency response
50 - 33000 Hz
Voice Coil Material
copper
Magnet
Neodymium
Thiele & Small Parameter
Fs (Resonance Frequency)
56 Hz
Re (DC resistance)
3.18 Ohm(s)
Qms (mechanical quality)
9.71
Le (inductance of the voice coil)
0.4 mH
Qes (electrical quality)
0.34
Qts (overall quality)
0.33
Vas (equivalent volume)
111.97 liters / 3.95 cu.ft.
Mms (moving mass)
74 g
BL (power factor)
15.76 T/m
Xmax (maximum displacement)
1.4 mm
Cms (elasticity of the suspension)
0.11 mm/N
Sd (membrane area)
856.3 cm²
Weight
3,49 kg
1200 W continuous program power capacity
76 mm (3 in) copper voice coil
40 – 2000 Hz response
100.5 dB sensitivity
Aluminium demodulating ring allows a very low distortion figure
Neodymium ring magnet allows a very high force factor and linear excursion
Double silicone spider with optimized compliance
Ventilated voice coil gap for reduced power compression

The 2226J 15" low frequency transducer represents the results of JBL's latest engineering research in high power transducer design. For increased power handling while reducing power compression, a unique direct voice coil-to-air heat dissipation method called Vented Gap Cooling has been used. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature. Through the use of new computer-aided magnet optimization and analysis techniques comes a new weight-optimized Symmetrical Field Geometry (SFG) magnet structure, resulting in a reduction of overall driver weight and a significant reduction in harmonic distortion. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost. Specifications: *Power handling: 600 watts RMS *Voice coil diameter: 4" *Nominal impedance: 16 ohms *Frequency Range: 30-2,500 Hz *Magnet assembly weight: 15 lbs. *Fs: 40 Hz *SPL: 97 dB 1W/1m *Vas: 6.2 cu. ft. *Qms: 5.0 *Qes: 0.33 *Qts: 0.31 *Xmax: 7.6 mm *Dimensions: Overall Diameter: 15-1/4“, Cutout Diameter: 14“, Mounting Depth: 5-1/2“.

DELTA-15A Series Standard American Recommended for professional audio as a mid-bass or vocal wedge in a sealed enclosure. Also suitable as a mid-bass or woofer in vented enclosures. SPECIFICATION
  • Nominal Basket Diameter 15“, 381 mm
  • Nominal Impedance 4 ohms
  • Power Rating Watts 400 W / Music Program 800 W
  • Resonance 40 Hz
  • Usable Frequency Range 48 Hz - 4 kHz
  • Sensitivity 100
  • Magnet Weight 56 oz.
  • Gap Height 0.375“, 9.53 mm
  • Voice Coil Diameter 2.5“, 63.5 mm
THIELE & Small Parameters
  • Resonant Frequency (fs) 40 Hz
  • DC Resistance (Re) 6.3
  • Coil Inductance (Le) 0.64 mH
  • Mechanical Q (Qms) 8.05
  • Electromagnetic Q (Qes) 0.57
  • Total Q (Qts) 0.53
  • Compliance Equivalent Volume (Vas) 270.7 liters / 9.56 cu.ft
  • Peak Diaphragm Displacement Volume (Vd) 233 cc
  • Mechanical Compliance of Suspension (Cms) 0.26 mm/N
  • BL Product (BL) 13.2 T-M
  • Diaphragm Mass inc. Airload (Mms) 62 grams
  • Efficiency Bandwidth Product (EBP) 70
  • Maximum Linear Excursion (Xmax) 2.7 mm
  • Surface Area of Cone (Sd) 864.6 cm²
  • Maximum Mechanical Limit (Xlim) 11.1 mm
MOUNTING Information
  • Recommended Enclosure Volume Sealed 37-42.5 liters/1.3-1.5 cu.ft. Vented 82-161.4 liters/2.9-5.7cu.ft.
  • Overall Diameter 15.15“, 384.8 mm
  • Baffle Hole Diameter 13.77“, 349.6 mm
  • Front Sealing Gasket fitted as standard
  • Rear Sealing Gasket fitted as standard
  • Mounting Holes Diameter 0.25“, 6.4 mm
  • Mounting Holes B.C.D. 14.56“, 369.9 mm
  • Depth 6.05“, 154 mm
MATERIALS of Construction
  • Aluminum voice coil
  • Polyimide former
  • Ferrite magnet
  • Vented core
  • Pressed steel basket
  • Paper Cone
  • Cloth cone edge
  • Solid composition paper dust cap
Recommended for professional audio as a mid-bass or floor monitor in a sealed enclosure. Also suitable as a woofer in vented, bass guitar or PA enclosures. Product type Loudspeaker Chassis
Type PA
Nominal Diameter 15 "
Nominal Diameter 381 mm
Voice Coil 2.5 "
Voice Coil 63.5 mm
Overall diameter 384.8 mm
Pitch Circle Diameter 369.9 mm
Cut- out Measurement 352.3 mm
Diameter of fixing holes 6.4 mm
Depth 160 mm
Nominal Impedance 8 Ohm(s)
Nominal Load Capacity 500 W
maximum rated load 1000 W
Sensitivity (1 W / 1 m) 96 dB
Frequency response 42 - 3200 Hz
Voice Coil Material copper
Magnet Ferrite
Depth of the magnetic gap 9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency) 39 Hz
Re (DC resistance) 6.11 Ohm(s)
Qms (mechanical quality) 6.3
Le (inductance of the voice coil) 1.37 mH
Qes (electrical quality) 0.52
Qts (overall quality) 0.48
Vas (equivalent volume) 241
Mms (moving mass) 75 g
BL (power factor) 14.6 T/m
Xmax (maximum displacement) 4.8 mm
Cms (elasticity of the suspension) 0.23 mm/N
Sd (membrane area) 873 cm²
Weight 6,449 kg

Neodymium coaxial speaker with 15" woofer, 8Ω,
400W Nominal, 800W continuous, 99dB
(1W/1m) and horn 80W Nominal, 160W
continuous, 105dB (1W/1m), response
frequency 40-18000Hz, dispersion 80 degrees,
5,6Kg.

800 W continuous program power capacity
80° nominal coverage
40 – 18000 Hz response
99 dB sensitivity

Single Neodymium magnet assembly

Nominal Diameter 380 mm (15 in)
Nominal Impedance 8 ohm
Minimum Impedance 6.0 ohm (LF)
8.0 ohm (HF)
Frequency Range 40 - 18000 Hz
Dispersion Angle 80°
LF Unit
Sensitivity (1W/1m) 99 dB
Nominal Power Handling 400 W
Continuous Power Handling 800 W
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
HF Unit
Sensitivity (1W/1m) 105 dB
Nominal Power Handling 80 W
Continuous Power Handling 160 W
Voice Coil Diameter 75 mm (3 in)
Winding Material Aluminium
Diaphragm Material Polyester/Titanium
Recom. Crossover 1.2 kHz

 

Overall Diameter 393 mm (15.5 in)
Bolt Circle Diameter 374 mm (14.7 in)
Baffle Cutout Diameter 353 mm (13.9 in)
Depth 198 mm (7.8 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 5.6 kg (12.3 lb)
Shipping Weight 7.0 kg (15.4 lb)
Shipping Box 450x450x290 mm
(17.7x17.7x11.4 in)

 

Weight3.6 kg5.60 kg10.00 kg4.00 kg6.50 kg7.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.6 kg
Woofer Inch

Weight 5.60 kg
Weight 10.00 kg
Weight 4.00 kg
Weight 6.50 kg
Weight 7.00 kg