Content |
- DMX wireless transmitter in miniature format for the wireless transmission of up to 512 DMX channels
- User friendly 3-pin XLR (male) connector with swivel antenna
- Wireless DMX eliminates the need for complex cabling between DMX controllers and DMX-controlled devices in lighting setups
- Due to GFSK modulation with 78 channels, interference-free operation is also possible alongside other QuickDMX receivers and wireless devices in the 2.4 GHz band (e.g. WLAN and Bluetooth)
- Operating range of up to 400 m
- From one up to 512 QuickDMX receivers can be operated per transmitter
- A maximum of 6 transmitters can be operated simultaneously, giving a total of 3072 DMX channels that can be controlled
- Plug & Play: Quick and easy setup with one operating button for connecting / disconnecting QuickDMX receivers
- LED function display
- Powered via included power supply
Technical specifications:
- 2.4 GHz ISM Band - No license is required and no charges are incurred when used anywhere in the world
- Power supply: 100 - 240 V AC, 50 / 60 Hz via included power supply
- Wireless transmission in the 2.4 GHz band (ISM)
- 78 Channels
- Modulation: GFSK
- Operating range: 400 m (with line-of-sight)
- DMX connector: 3-Pin XLR
- DMX channels: 1 Universe (512 channels)
- Dimensions with antenna (L x W x H): 212 x 18 x 18 mm
- Weight: 80 g
|
NX DMX NX DMX is a USB powered 2 port DMX Node. As a member of the innovative ONYX platform from Obsidian Control Systems the NX DMX provides instant access to DMX In and Outputs as well as RDM communication. The device is plug and play and requires no drivers or additional configuration to integrate with ONYX. It is designed to work with any PC but also works with any ONYX console as a fast and affordable way to add two additional DMX ports.NX DMX supports ONYX on PC systems for up to four Universes without any dedicated license. When connected to an ONYX licensed PC or ONYX console the NX DMX is assignable to any one of 255 Universes.NX DMX allows for the full ONYX system to be used in many situations, from small events and tradeshows to clubs and churches. Many technicians utilize ONYX through the NX DMX as an affordable but powerful test station due to ONYX\' outstanding library support. CONNECTION 2x DMX / RDM Universe In/Out: 5pin locking XLR USB In: USB 2.0 B
SPECIFICATION Physical - Weight: 245g (0.6 lbs.)
- Length: 92 mm (3.7 in.)
- Width: 82 mm (3.3 in.)
- Height: 41mm (1.7 in.)
Electrical
- 5V over USB
- 100-240V nominal, 50/60 Hz
- Maximum current: 300 mA
|
- 2 x DMX512 universes in live mode (computer / tablet) and standalone mode
- Expandable from two to four DMX512 universes (2048 DMX channels)
- Intuitive illuminated keypad with 10 buttons for direct scene recall
- 99 Scenes on 5 zones
- USB and Ethernet for programming / control
- 16 Dry contact ports via HE20 connectors
- User-friendly, intuitive Cameo DMX software "by Daslight", free download for Windows and Mac OS X available
- Advanced triggering options (TCA)
- Smart upgrade technology (SUT)
- Live operation: 1024 channels
- Standalone operation: 1024 channels
- Software mode: Cameo D 4 / Daslight DVC 4 (fully supported)
- Operating systems: Android, iOS, Mac OS, Windows
- Inputs: Ethernet, USB-C
- Outputs: Ethernet
- Memory: microSD, SDHC (32 GB max)
- Power supply: 5 - 5.5 V DC 0.6 A
- IP protection type: IP20
- Dimensions (W x H x D): 160 x 90 x 45 mm
- Weight: 0.3 kg
- Colour: Grey
| The Cameo CLSB83 is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 8 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB83 and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.
The Cameo DMX splitter and booster is also available in 5-pin design (art. No CLSB85).
- Type: DMX 512 protocol
- DMX Inputs: 2 (parallel)
- DMX Input Connectors: 3-pin XLR male
- DMX Thru Outputs: 2 (parallel)
- DMX Thru Output Connectors: 3-pin XLR female
- DMX Outputs: 8 (electrically isolated)
- DMX Output Connectors: 3-pin XLR female
- Controls: Power On/Off, DMX Thru Terminator
- Indicators: 8 x Power LED, 8 x Signal LED
- Power Socket: IEC power socket
- Power Supply: transformer
- Operating Voltage: 230 V AC, 50 Hz
- Power Consumption (max.): 15 W
- Dimensions (W x H x D): 483 x 44 x 160 mm
- Accessories included in package: power cord
|
- DMX out USB Dongle
- 512 channels
- Titan PC Suite for Windows
- 5-pin DMX Female, 1 x USB Type A
- Avolites Titan
- Bus Powered
- 30-01-9601
| The Cameo W-DMX™ T2 is the successor to the W-DMX T1™ with a higher transmission range and Bluetooth connectivity for configuration. It is a member of Wireless Solution's acclaimed BlackBox series of transceivers for wireless lighting control supporting both transmit and receive modes of DMX and RDM signals in the 2.4 GHz frequency band. Built for professional applications, the roadworthy die-cast metal housing is packed with patented W-DMX™ technologies. These include Adaptive Frequency Hopping to automatically avoid interference created by other wireless networks, and Data-Safe error correction that protects DMX and RDM data from corruption.
The Cameo W-DMX™ T2 features Neutrik 3-pin and 5-pin DMX inputs and outputs, an automatically switching power supply for multi-voltage operation plus a gold-plated Phoenix connector for 12 V battery powering. The G5 transceiver is backward compatible with W-DMX™ G3, G4, G4S and G5 units. It comes with a 3 dBi single-band antenna providing an operating range up to 700 m, N-type antenna adapter and a 19" rackmount kit.
The Cameo W-DMX™ T2 is also prepared for upgradeable CRMX compatibility, making it a versatile transceiver.
CRMX upgrade license code available for 99€ upon request. Please contact our inside sales team.
Product type
LED Moving Lights
Colour spectrum
Cold white
Refresh rate
adjustable to 25000 Hz
DMX input
XLR 3-pin male, XLR 5-pin male
DMX output
XLR 3-pin female, XLR 5-pin female
DMX mode
34-channel, 50-channel
DMX Functions
Animation Wheel, Auto Movement, Colour wheel, CTO, CTO Fine, Cyan, Cyan Fine, Device Settings, Dimmer, Dimmer Fine, Focus, Focus Fine, Framing Blade Rotation, Framing Blades, Frost, Gobo Wheel 1, Gobo Wheel 2, Iris, Magenta, Magenta Fine, PAN, PAN FINE, Prism, Rotation Fine Gobo Wheel 1, Rotation Gobo Wheel, Rotation Prism, Set Dimmer Curve, strobe, TILT, TILT FINE, Yellow, Yellow Fine, Zoom, Zoom Fine
High Speed Strobe
> 20 Hz
Standalone modes
Auto Mode, Device Settings, Static
Controls
Enter, Mode, Touch screen, Value Down, Value Up
Indicators
Graphic Display, Touch-Graphic Display
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Ambient temperature (operating)
-15 - 45 °C
Power connector
Neutrik powerCON IN / OUT
Housing material
ABS plastic, Metal
Cooling
Heat-pipe cooling system with temperature controlled fans
Illuminance
100,000 lx @ 3m, 39000lx @ 5m
Accessories (included)
2 x Omega Clamp, Power cord
|
Reviews
There are no reviews yet.