| Content |
Product type
Loudspeaker Chassis
Overall diameter
167.4 mm
Pitch Circle Diameter
154 mm
Cut- out Measurement
144 mm
Diameter of fixing holes
6 mm
Nominal Impedance
4 Ohm(s)
Nominal Load Capacity
130 W
Sensitivity (1 W / 1 m)
95 dB
Frequency response
85 - 6000 Hz
Voice Coil Material
Aluminium
Depth of the magnetic gap
8 mm
Fs (Resonance Frequency)
120 Hz
Re (DC resistance)
3 Ohm(s)
Qms (mechanical quality)
6.2
Le (inductance of the voice coil)
0.2 mH
Qes (electrical quality)
0.51
Qts (overall quality)
0.41
Vas (equivalent volume)
3.6
Xmax (maximum displacement)
4.62 mm
Cms (elasticity of the suspension)
0.18 mm/N
Sd (membrane area)
118 cm²
Rms (mechanical loss resistance)
1.17 kg/s
|
Line Arrays
Recommended for professional audio midrange from 500Hz-3kHz. Basket is closed. Truncated basket for close
spacing in line-arrays.
SPECIFICATION - Nominal Basket Diameter 6.5“, 165 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 150 W / Music Program 300 W
- Resonance 460 Hz
- Usable Frequency Range 500 Hz - 5.4 kHz
- Sensitivity 97.8
- Magnet Weight 38 oz.
- Gap Height 0.31“, 7.92 mm
- Voice Coil Diameter 1.5“, 38.1 mm
THIELE & Small Parameters - Resonant Frequency (fs) 460 Hz
- DC Resistance (Re) 6.3
- Coil Inductance (Le) 0.33 mH
- Mechanical Q (Qms) 3.13
- Electromagnetic Q (Qes) 1.24
- Total Q (Qts) 0.89
- Compliance Equivalent Volume (Vas) 0.4 liters / 0.01 cu. ft.
- Peak Diaphragm Displacement Volume (Vd) 2.7 cc
- Mechanical Compliance of Suspension (Cms) 0.01 mm/N
- BL Product (BL) 11.1 T-M
- Diaphragm Mass inc. Airload (Mms) 9 grams
- Efficiency Bandwidth Product (EBP) 371
- Maximum Linear Excursion (Xmax) 0.2 mm
- Surface Area of Cone (Sd) 133.1 cm²
- Maximum Mechanical Limit (Xlim) 0.8 mm
MOUNTING Information - Recommended Enclosure Volume
Sealed N/A
Vented N/A - Overall Diameter 6.59“, 167 mm/Width
- Baffle Hole Diameter 5.65“, 143.5 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket as standard
- Mounting Holes Diameter 0.23“, 5.7 mm
- Mounting Holes B.C.D. 6.06“, 154 mm
- Depth 2.77“, 70 mm
MATERIAL of Construction - Copper voice coil
- Polyimide former
- Ferrite magnet
- Vented and extended core
- Pressed steel basket with truncated sides
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
|
| 38 mm (1.5 in) copper voice coil |
| | 70 - 6000 Hz response |
| | 92 dB sensitivity |
| | Neodymium magnet allows a very light yet powerful motor assembly |
| | Aluminium demodulating ring allows a very low distortion figure |
| | 300 W continuous program power capacity |
| |
Nominal Diameter 160 mm (6 in)
Overall Diameter 181.2/164 mm (7.13/6.46 in)
Bolt Circle Diameter 167 mm (6.57 in)
Baffle Cutout Diameter 147 mm (5.79 in)
Depth 84.5 mm (3.33 in)
Flange and Gasket Thickness 8 mm (0.31 in)
Net Weight 1.2 Kg (2.64 lb)
Shipping Box
(Single Carton Box - 4 units) 380x393x128 mm (14.9x15.47x5.03 in)
Shipping Weight (4 units) 5.6 Kg (13.82 lb)
Nominal Impedance 8 Ohm
Minimum Impedance 5.9 Ohm
Nominal Power Handling *** 100 W
Maximum Power Handling **** 200 W
Sensitivity (1W/1m) 91 dB
Frequency Range 63÷5000 Hz
Voice Coil Diameter 32 mm (1.26 in)
Winding Material Cu
Former Material Kapton
Winding Depth 12.5 mm (0.49 in)
Magnetic Gap Depth 6 mm (0.24 in)
Flux Density 1 T
Fs 61 Hz
Re 5.4 Ohm
Qes 0.6
Qms 6
Qts 0.54
Vas 14.8 dm^3 (0.52 ft^3)
Sd 137 cm^2 (21.23 in^2)
Xmax * 5.25 mm
Xdamage ** 13.15 mm
Mms 14 g
Bl 6.8 N/A
Le 0.5 mH
Mmd 13 g
Cms 0.56 mm/N
Rms 0.84 Kg/s
Eta Zero 0.46 %
EBP 102 Hz
|
| 44 mm (1.7 in) aluminium voice coil |
| | 150 – 6000 Hz response |
| | 96.5 dB sensitivity |
| | Neodymium magnet allows a very light yet powerful motor assembly |
| | Aluminium demodulating ring allows a very low distortion figure |
| | 300 W continuous program power capacity |
| | Ventilated voice coil gap for reduced power compression |
|
Reviews
There are no reviews yet.