Price | €132.41 Original price was: €132.41.€110.92Current price is: €110.92. incl. GR VAT | €188.08 Original price was: €188.08.€159.87Current price is: €159.87. incl. GR VAT | €401.32 Original price was: €401.32.€341.12Current price is: €341.12. incl. GR VAT | €405.00 Original price was: €405.00.€344.24Current price is: €344.24. incl. GR VAT | €117.79 Original price was: €117.79.€116.62Current price is: €116.62. incl. GR VAT | €150.03 Original price was: €150.03.€135.00Current price is: €135.00. incl. GR VAT |
Content |
Nominal Specifications
* Nominal Diameter 5“, 130 mm
* Overall Diameter 6.02/5.51“, 153/140 mm
* Bolt Circle Diameter 5.5“, 139 mm
* Baffle Cutout Diameter 5.04“, 128 mm
* Depth 3.1“, 79 mm
* Flange and Gasket Thickness 0.29“, 7.5 mm
Electrical Specifications
* Minimum Impedance 8.8 Ohm
* Nominal Impedance 12 Ohm
* Nominal Power Handling*** 80 W
* Maximum Power Handling**** 160 W
* Sensitivity (1W/1m) 99 dB
* Frequency Range 180 - 6300 Hz
* Voice Coil Diameter 1.26“, 32 mm
* Winding Material Copper
* Former Material Kapton
* Winding Depth 0.29“, 7.5 mm
* Magnetic Gap Depth 0.24“, 6 mm
* Flux Density 1.65 T
THIELE & Small Parameters
* Resonant Frequency (fs) 180 Hz
* DC Resistance (Re) 7.2 Ohm
* Coil Inductance (Le) 0.15 mH
* Mechanical Q (Qms) 2.70
* Electromagnetic Q (Qes) 0.59
* Total Q (Qts) 0.48
* Compliance Equivalent Volume (Vas) 0.033 ft³, 0.93 dm³
* Mechanical Compliance of Suspension (Cms) 0.075 mm/N
* Rms 3.93 Kg/s
* BL Product (BL) 11.3 N/A
* Diaphragm Mass inc. Airload (Mms) 8.4 grams
* Maximum Linear Excursion (Xmax)* 2.75 mm
* Xdamage** 15.2 mm
* Surface Area of Cone (Sd) 14.6“², 94.3 cm²
* Diaphragm mass (Mmd) 7.5 g
* Eta Zero 1.23 %
Notes
* *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
* **Maximum excursion before permanent damage
* ***2 Hours Test According to AES 2-1984 Rev. 2003
* ****Maximum power is defined as 3dB greater than nominal power
|
- 91 dB Sensitivity 1 W / 1 m
- 130 W Power Handling
- 1.5" Sandwich Voice Coil
- Double treated Cone for Water Protection
- Neodymium Magnet System
- Twin Aluminum demodulating Rings for ultra low Distortion
- Optimal for compact 2- or 3-way Systems
|
- 91 dB sensitivity 1 W / 1 m
- 130 W + 60 W Power Handling
- 1.5" + 1.5“ Copper Voice Coil
- Single Point Source providing coherent Wave Front
- 90° conical Dispersion
- Optimal for compact 2-way Systems
|
5" Neodymium Coaxial Transducer - 90 dB sensitivity 1 W / 1 m
- 130 W + 25 W Power Handling
- 1.5" + 1" Voice Coil
- Single point source providing coherent wave front
- 90° conical dispersion
- Optimal for compact 2-way Systems
|
LSR25P LF Driver Description:
This is the JBL low frequency driver (MPN 124-10002-00) for the LSR25P powered reference monitor. It is a genuine JBL replacement part sold to you sealed just the way we get it from JBL. The device is mounted in a frame which bolts into the front baffle of the speaker from the inside. You must dismantle the speaker to replace this driver. Order carefully, returns for your mistakes are not allowed.
|
- 180 W continuous program power capacity
- 38 mm (1.5 in) copper voice coil
- 90 - 7000 Hz response
- 90 dB sensitivity
- Shorting copper cap for extended HF response
SPECIFICATIONS
Nominal Basket Diameter
|
5" / 127mm
|
Impedance
|
8 ohms
|
RMS Power Rating
|
90 Watts
|
Program Power
|
180 Watts
|
Frequency Response
|
90Hz - 7.0kHz
|
Sensitivity (1W/1m)
|
90dB
|
Voice Coil Diameter
|
1.5" / 38mm
|
Winding Material
|
Aluminum
|
Former Material
|
Kapton
|
Winding Depth
|
.37" / 9.5mm
|
Magnetic Gap Depth
|
.24" / 6mm
|
Flux Density
|
1.15T
|
MOUNTING INFORMATION
Overall Diameter
|
5.9" / 150mm
|
Bolt Circle Diameter
|
5.6" / 142mm
|
Baffle Cutout Diameter
|
4.8" / 122mm
|
Depth
|
2.95" / 75mm
|
Flange & Gasket Thickness
|
.35" / 9mm
|
No. Of Mounting Holes
|
4
|
Net Weight
|
1.9 lbs./ .85 kg.
|
THIELE-SMALL PARAMETER
Resonant Frequency (fs)
|
92Hz
|
Impedance (Re)
|
5.5 ohms
|
Electrical Factor(Qes)
|
.5
|
Mechanical Q (Qms)
|
11
|
Total Q (Qts)
|
.48
|
Compliance Equiv. Vol. (Vas)
|
3.3 Liters/.12cu. ft.
|
Voice Coil Overhang (Xmax)
|
3.3mm
|
Reference Efficiency
|
0.5%
|
BL Factor
|
8.5 T-M
|
Coil Inductance(Le)
|
0.35mH
|
Surface Area of Cone (Sd)m2
|
0.0095m2
|
|
Reviews
There are no reviews yet.