FOCUSRITE ITRACK DOCK STUDIO PACK For IPAD+MIC+HEADPHONES

Features

• Made for iPad: iTrack Dock is an Apple-compliant audio docking interface with Apple-certified "Made for iPad" status. Compliant with any Lightning iPad - iPad 4th Generation, iPad Air, iPad mini and iPad mini with retina display - iTrack Dock's sleek, modular design allows you to slide the Lightning connector up and down to accommodate any sized iPad.
• Record and monitor at superior resolution: iTrack Dock is the best sounding iPad-based workstation, featuring premium Focusrite A-D/D-A conversion with over 105dB dynamic range and the ability to record at up to 24-bit, 96kHz sample rates.
• Legendary Focusrite mic preamps: Two Focusrite mic pres, as featured in the Scarlett range of USB audio interfaces, include 48V Phantom power for use with condenser microphones. iTrack Dock also features Focusrite's unique "gain halos" - a ring of light around the input gain control - to easily set the input gain: green for healthy signal, red if it's too hot.
• Plug your guitar into your favourite apps: iTrack Dock provides a guitar input with plenty of clean, clear headroom to capture both quiet and loud guitars with stunning clarity.
• Connect and power a MIDI controller: USB MIDI port for class compliant MIDI controller connectivity (MIDI + power) - perfect for connecting a controller like the Novation Launchkey or Launchkey Mini.
• Works with all Core Audio apps on iPad: From GarageBand to Cubasis, Auria and beyond, expand the functionality of your apps with the iTrack Dock and its plug-and-play Core Audio driver - no setup required.
• High quality outputs with over 105dB dynamic range: Main monitor outputs on balanced 1/4 inch TRS connectors and large-diameter level control knob, plus stereo headphone output with its own level controls - delivering more than enough power for your headphones and powered monitor speakers.
• Direct monitoring: Avoid monitoring latency delays with the iTrack Dock's direct monitoring feature, sending your input signal straight to the headphone and main monitor outputs.
• Stereo line inputs: Connect a variety of other stereo sound devices with the balanced line inputs, including digital pianos, synths, drum machines and CD players.
• Recording app included: Includes Tape by Focusrite app for iPad, which offers instant recording, mastering and sharing without the complexities of traditional music-making software.

nio 2 | 4 is a 2 In / 4 Out mobile USB interface for the modern music maker. Nio 2 | 4 features Novationʼs unique ʽDirect FXʼ technology, placing a powerful multi-effects engine within nio 2 | 4ʼs custom drivers. These effects rest close to the core of your computer, working independently of other software and providing powerful ultra-low latency effects for hassle-free, real time jamming and recording. This same unique environment ensures rock-solid, lightning-fast performance, making it the ideal interface solution for home recording, live performing and DJʼing alike; one size fits all. With two headphones outputs, itʼs also an ideal solution for the classroom environment.

• 1 XLR (with phantom power)
• 1 TS Jack
• 2 RCA Phono
• Two inputs simultaneously only - either stereo RCA phono or the XLR and Jack

• 4 RCA Phono
• 2 stereo 1/4" Headphones Jacks

• 44.1/48kHz sample rate
• 24-bit resolution

• Data ports: 1 x USB 1.1

• MIDI i/o

• Operating system: Mac OSX 10.3.9 or greater (Leopard also supported) or Windows XP with Service Pack 2 or greater (Vista 32/64 also supported)
• Minimum Computer spec: Mac - G3/600MHz or G4/667MHz, both with 256MB RAM or PC - Pentium 3/500MHz/256MB RAM (machines running Vista will require a higher spec)
  
  Interfacing: USB 1.1 compatible USB connector (also compatible with USB 2.0), 28/24 awg USB cable recommended

• 633g
• 45.4mm (H) x 144mm (W) x 149mm (D)

UA-20: Audio Capture USB Audio/MIDI Interface Features

The UA-20 is the standard model to Edirol's rapidly expanding UA series of USB Audio Capture devices. The unit can accept input from Mic, Line and even guitar level signals. The audio is converted at 24-bit quality and is transferred to your computer via industry standard low latency WDM, ASIO, MME drivers for compatibility with all major sequencing platforms, the input signal may be also monitored directly in hardware. Outputs include analogue, digital and headphone. The built-in MIDI in and out utilize Edirol's Fast Processing Technology for super accurate MIDI timing with any sequencing software on Mac or PC platforms and can be used with both OMS or FreeMIDI drivers on the Apple Macintosh. The UA-20 requires no external power supply and is ideal for use by mobile laptop or Powerbook users. The unit ships with drivers for Windows XP, 2000, Me, 98, MacOS X, and Mac OS 9.x, 8.5 and may also be used with the native USB audio drivers that are included with both Mac & PC.

• Audio and MIDI in a compact unit.
• Fully equipped with I/O jacks.
• Great tool for creating music.
• Edirol's FPT Technology.

The UA-1G is a compact 1 x 1 USB Audio Interface that offers excellent-quality sound via multiple connection options and a simple, user-friendly design.

• Stereo input and output at 24-bit/96kHz audio quality
• High-end A/D and D/A converters for accurate recording and playback
• Large Input Level knob for easy control while recording
• 1/4" jack with Hi-Z option for recording electric guitar or bass
• Electret condenser mic input
• RCA phono type and optical-digital audio I/O
• Headphone output
• USB powered – no AC adapter required
• SONAR LE for music recording, editing, and publishing on PC
• Low-latency ASIO 2.0 (PC); WDM (Windows Vista, Windows XP) and Core Audio (Mac OS X) support

• Number of Audio Record/Playback Channels	Record: 1 pair of stereo Play: 1 pair of stereo REC SOURCE switch = ANALOG: Full duplex (except for 96 kHz setting) REC SOURCE switch = DIGITAL: Recording only
  Signal Processing	PC interface: 24 bits AD/DA Conversion: 24 bits (linear) * ADVANCE DRIVER switch = OFF: 16 bits
  Sampling Frequency	Digital output: 32/44.1/48/96 kHz Digital input: 32/44.1/48/96 kHz AD/DA Conversion: 32/44.1/48/96 kHz * ADVANCE DRIVER switch = OFF: 32/44.1/48 kHz
  Nominal Input Level	Line input jacks: -10 to +4 dBu Guiter input jakcs: -30 to -16dBu Mic input jack: -40 to -26 dBu
  Nominal Output Level	Line output jacks: -10 dBu
  Interface	USB Digital input (Optical mini type) * The same jack serves as both the Mic Input jack and digital input connector. Digital output (Optical mini type) * The same jack serves as both the headphones jack and digital output connector. * conforms to IEC60958 consumer format.
  Controllers	ADVANCED DRIVER Switch Guiter/Mic Switch INPUT VOLUME knob PHONES VOLUME Dial SAMPLE RATE Switch 96kHz MODE Switch INPUT MONITOR Switch REC SOURCE Switch
  Connectors	USB Connector (B type) Line Input jacks (L, R) (RCA phono type) Line Output jacks (L, R) (RCA phono type) Guiter/Mic Input jack: （1/4 inch phone type) Mic Input jack (Plug-in powered miniature phone type) Digital Intput connector (Optical mini type) * The same jack serves as both the headphones jack and digital output connector. Headphones jack (Stereo miniature phone type) Digital Output connector (Optical mini type) * The same jack serves as both the Mic Input jack and digital input connector.
  Power Supply	Supplied from the computer
  Current Draw	200 mA
  Accessories	Ownerʼs Manual, UA-1G CD-ROM, SONAR LE CD-ROM
  Size and Weight
  Width	160 mm 6-5/16 inches
  Depth	58 mm 2-5/16 inches
  Height	28 mm 1-1/8 inches
  Weight	165 g 0 lbs. 6 oz.

  
  
  
  

The all new 896mk3 FireWire audio interface delivers high-end performance, superb sound, innovative new features and enhanced standard features that remain unique.

The 896mk3 provides eight channels of pristine 24-bit 192 kHz analog recording and playback, combined with sixteen channels of optical digital I/O, stereo AES/EBU, S/PDIF and separate analog main outs. Expand your system by connecting the 8pre mic input expander or other MOTU audio interfaces.

The 896mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 896mk3 provides 28 separate inputs and 32 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.

Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer – with no latency and no processor strain on your computer. Apply hardware DSP-driven effects processing to inputs, outputs, and busses independent of your host computer. Add Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: a conventional compressor and the Leveler™, an accurate model of the legendary LA-2A™ optical compressor that provides vintage, musical automatic gain control.

MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.

When recording from the mic/guitar inputs, the 896mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts.

After programming the on-board mixing in the studio, unplug the 896mk3 from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.

The 896mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.

he U46XL is a powerful multi-purpose 4-in 6-out multi-channel audio interface designed for various recording applications at home or on the road. The U46XL is the successor of to ESI Audio's famous U46DJ interface.

As its predecessor, it provides 2 stereo line inputs, a microphone input with +48V phantom power and a headphone output. A main difference is the improved analog circuitry improving the audio quality as well as the professional microphone preamplifier with XLR input. This makes the U46XL the perfect solution to record signals from dynamic or condenser microphones on the road or in your studio.

The unit also features an instrument input (Hi-Z), typically to connect a guitar directly to it. Two totally separate stereo line input on the backside provide 4 simultaneously usable input channels at one time. There are also 6 independent individual outputs on the backside, perfect for multi-channel playback applications like to provide individual outputs for software synthesizers, to provide independent playback channels for DJ software or to provide surround playback capability via a 5.1 setup. A separate mix output with professional TRS outputs could be used to connect U46XL to professional stereo studio monitors.

A cool feature is the DirectWIRE support in the driver, allowing you to record signals from one application to another internally. U46XL works with this driver based on our EWDM technology under Windows XP and Windows Vista/7, however U46XL is also Mac OS X compatible.

U46XL ships with Cubase LE 4 from Steinberg for Mac and PC to start recording on a professional level right out of the box.