FOCUSRITE ITRACK DOCK STUDIO PACK For IPAD+MIC+HEADPHONES

Discontinued

Original price was: €303.95.Current price is: €212.99. incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
iTrack Dock Studio Pack contains everything you need to plug your instruments straight in and easily record with legendary Focusrite sound on any lightning-compatible iPad Sleek iPad audio interface with two award-winning microphone preamps Large diaphragm CM25 condenser microphone Professional closed-back HP60 headphones High quality three metre XLR cable Class compliant USB cable Features Made […]

 

Read more

iTrack Dock Studio Pack contains everything you need to plug your instruments straight in and easily record with legendary Focusrite sound on any lightning-compatible iPad Sleek iPad audio interface with two award-winning microphone preamps Large diaphragm CM25 condenser microphone Professional closed-back HP60 headphones High quality three metre XLR cable Class compliant USB cable

Features

  • Made for iPad: iTrack Dock is an Apple-compliant audio docking interface with Apple-certified “Made for iPad” status. Compliant with any Lightning iPad – iPad 4th Generation, iPad Air, iPad mini and iPad mini with retina display – iTrack Dock’s sleek, modular design allows you to slide the Lightning connector up and down to accommodate any sized iPad.
  • Record and monitor at superior resolution: iTrack Dock is the best sounding iPad-based workstation, featuring premium Focusrite A-D/D-A conversion with over 105dB dynamic range and the ability to record at up to 24-bit, 96kHz sample rates.
  • Legendary Focusrite mic preamps: Two Focusrite mic pres, as featured in the Scarlett range of USB audio interfaces, include 48V Phantom power for use with condenser microphones. iTrack Dock also features Focusrite’s unique “gain halos” – a ring of light around the input gain control – to easily set the input gain: green for healthy signal, red if it’s too hot.
  • Plug your guitar into your favourite apps: iTrack Dock provides a guitar input with plenty of clean, clear headroom to capture both quiet and loud guitars with stunning clarity.
  • Connect and power a MIDI controller: USB MIDI port for class compliant MIDI controller connectivity (MIDI + power) – perfect for connecting a controller like the Novation Launchkey or Launchkey Mini.
  • Works with all Core Audio apps on iPad: From GarageBand to Cubasis, Auria and beyond, expand the functionality of your apps with the iTrack Dock and its plug-and-play Core Audio driver – no setup required.
  • High quality outputs with over 105dB dynamic range: Main monitor outputs on balanced 1/4 inch TRS connectors and large-diameter level control knob, plus stereo headphone output with its own level controls – delivering more than enough power for your headphones and powered monitor speakers.
  • Direct monitoring: Avoid monitoring latency delays with the iTrack Dock’s direct monitoring feature, sending your input signal straight to the headphone and main monitor outputs.
  • Stereo line inputs: Connect a variety of other stereo sound devices with the balanced line inputs, including digital pianos, synths, drum machines and CD players.
  • Recording app included: Includes Tape by Focusrite app for iPad, which offers instant recording, mastering and sharing without the complexities of traditional music-making software.

iTrack Dock is a comprehensive yet easy-to-use, studio-quality iPad recording interface that acts as the hub of your Lightning iPad recording studio. Featuring two legendary Focusrite microphone preamps, along with two line inputs and an instrument DI with plenty of extra headroom, stereo monitor outputs with 105dB dynamic range plus independently-controlled headphone outputs, and a USB port for class compliant MIDI instruments and controllers, iTrack Dock gives you everything you need to record, monitor and control music on your iPad (not included) – with precision Focusrite digital conversion at up to 24-bit, 96kHz sampling. And at the same time it charges and powers your iPad.

With two Focusrite preamps, main and monitor outputs with 105dB dynamic range, and all controls on the easily-accessed, angled front panel next to the iPad, iTrack Dock brings powerful, professional audio to any Core Audio app including GarageBand, Auria, Cubasis and Focusrite’s Tape app, which is included in the box.

Compatible with any Lightning-equipped iPad and instrument, microphone, class-compliant MIDI controller or audio device, iTrack Dock allows you to capture music in pristine 24-bit 96kHz resolution. iTrack Dock powers and charges the iPad, and powers a USB MIDI device – such as a Novation Launchkey or Launchkey Mini keyboard controller – all at the same time. Plug and power a class-compliant USB MIDI controller directly into iTrack Dock – there’s no need for USB hubs or camera connection kits.

iTrack Dock features easy-to-reach, dedicated monitor and headphone controls. Input level controls incorporate Focusrite’s unique “Gain Halos”, for accurate instrument and microphone level monitoring. Latency-free direct monitoring is also provided.

iTrack Dock is an Apple-compliant audio docking interface with Apple-certified “Made for iPad” status. Compliant with any Lightning iPad – iPad 4th Generation, iPad Air, iPad mini and iPad mini with retina display – iTrack Dock’s sleek, modular design allows you to slide the Lightning connector up and down to accommodate any sized iPad.

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “FOCUSRITE ITRACK DOCK STUDIO PACK For IPAD+MIC+HEADPHONES”

Your email address will not be published. Required fields are marked *

Quick Comparison

FOCUSRITE ITRACK DOCK STUDIO PACK For IPAD+MIC+HEADPHONES removeLEXICON I-ONIX U22 Audio Interface 2in/2out removeYAMAHA GO 46 FIREWIRE AUDIO-MIDI INTERFACE removeEDIROL UA-20 USB AUDIO AND MIDI removeYAMAHA GO 44 MOBILE FIREWIRE AUDIO INTERFACE removeBEHRINGER UCG-102 Guitar INTERFACE SOUND CARD remove
NameFOCUSRITE ITRACK DOCK STUDIO PACK For IPAD+MIC+HEADPHONES removeLEXICON I-ONIX U22 Audio Interface 2in/2out removeYAMAHA GO 46 FIREWIRE AUDIO-MIDI INTERFACE removeEDIROL UA-20 USB AUDIO AND MIDI removeYAMAHA GO 44 MOBILE FIREWIRE AUDIO INTERFACE removeBEHRINGER UCG-102 Guitar INTERFACE SOUND CARD remove
Image
SKUITRACK DOCK STUDIO PACKIONIX U22GO46UA-20GO44E005638
Rating
Price Original price was: €303.95.Current price is: €212.99. incl. GR VAT Original price was: €304.01.Current price is: €156.00. incl. GR VAT Original price was: €301.43.Current price is: €286.35. incl. GR VAT Original price was: €174.40.Current price is: €159.06. incl. GR VAT Original price was: €251.03.Current price is: €249.00. incl. GR VAT Original price was: €49.92.Current price is: €42.00. incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentiTrack Dock Studio Pack contains everything you need to plug your instruments straight in and easily record with legendary Focusrite sound on any lightning-compatible iPad Sleek iPad audio interface with two award-winning microphone preamps Large diaphragm CM25 condenser microphone Professional closed-back HP60 headphones High quality three metre XLR cable Class compliant USB cable

Features

  • Made for iPad: iTrack Dock is an Apple-compliant audio docking interface with Apple-certified "Made for iPad" status. Compliant with any Lightning iPad - iPad 4th Generation, iPad Air, iPad mini and iPad mini with retina display - iTrack Dock's sleek, modular design allows you to slide the Lightning connector up and down to accommodate any sized iPad.
  • Record and monitor at superior resolution: iTrack Dock is the best sounding iPad-based workstation, featuring premium Focusrite A-D/D-A conversion with over 105dB dynamic range and the ability to record at up to 24-bit, 96kHz sample rates.
  • Legendary Focusrite mic preamps: Two Focusrite mic pres, as featured in the Scarlett range of USB audio interfaces, include 48V Phantom power for use with condenser microphones. iTrack Dock also features Focusrite's unique "gain halos" - a ring of light around the input gain control - to easily set the input gain: green for healthy signal, red if it's too hot.
  • Plug your guitar into your favourite apps: iTrack Dock provides a guitar input with plenty of clean, clear headroom to capture both quiet and loud guitars with stunning clarity.
  • Connect and power a MIDI controller: USB MIDI port for class compliant MIDI controller connectivity (MIDI + power) - perfect for connecting a controller like the Novation Launchkey or Launchkey Mini.
  • Works with all Core Audio apps on iPad: From GarageBand to Cubasis, Auria and beyond, expand the functionality of your apps with the iTrack Dock and its plug-and-play Core Audio driver - no setup required.
  • High quality outputs with over 105dB dynamic range: Main monitor outputs on balanced 1/4 inch TRS connectors and large-diameter level control knob, plus stereo headphone output with its own level controls - delivering more than enough power for your headphones and powered monitor speakers.
  • Direct monitoring: Avoid monitoring latency delays with the iTrack Dock's direct monitoring feature, sending your input signal straight to the headphone and main monitor outputs.
  • Stereo line inputs: Connect a variety of other stereo sound devices with the balanced line inputs, including digital pianos, synths, drum machines and CD players.
  • Recording app included: Includes Tape by Focusrite app for iPad, which offers instant recording, mastering and sharing without the complexities of traditional music-making software.
iTrack Dock is a comprehensive yet easy-to-use, studio-quality iPad recording interface that acts as the hub of your Lightning iPad recording studio. Featuring two legendary Focusrite microphone preamps, along with two line inputs and an instrument DI with plenty of extra headroom, stereo monitor outputs with 105dB dynamic range plus independently-controlled headphone outputs, and a USB port for class compliant MIDI instruments and controllers, iTrack Dock gives you everything you need to record, monitor and control music on your iPad (not included) - with precision Focusrite digital conversion at up to 24-bit, 96kHz sampling. And at the same time it charges and powers your iPad. With two Focusrite preamps, main and monitor outputs with 105dB dynamic range, and all controls on the easily-accessed, angled front panel next to the iPad, iTrack Dock brings powerful, professional audio to any Core Audio app including GarageBand, Auria, Cubasis and Focusrite's Tape app, which is included in the box. Compatible with any Lightning-equipped iPad and instrument, microphone, class-compliant MIDI controller or audio device, iTrack Dock allows you to capture music in pristine 24-bit 96kHz resolution. iTrack Dock powers and charges the iPad, and powers a USB MIDI device - such as a Novation Launchkey or Launchkey Mini keyboard controller - all at the same time. Plug and power a class-compliant USB MIDI controller directly into iTrack Dock - there's no need for USB hubs or camera connection kits. iTrack Dock features easy-to-reach, dedicated monitor and headphone controls. Input level controls incorporate Focusrite's unique "Gain Halos", for accurate instrument and microphone level monitoring. Latency-free direct monitoring is also provided. iTrack Dock is an Apple-compliant audio docking interface with Apple-certified "Made for iPad" status. Compliant with any Lightning iPad - iPad 4th Generation, iPad Air, iPad mini and iPad mini with retina display - iTrack Dock's sleek, modular design allows you to slide the Lightning connector up and down to accommodate any sized iPad.

Features:

USB 2.0 Desktop Recording Studio
44.1kHz to 96kHz sample rates, 24-bit resolution
Pantheon II VST/AU reverb plug-in with 6 legendary Lexicon reverbs
dbx® 60V high-voltage, ultra-low noise microphone preamps
Superior sonic performance
2 analog combi-jacks for mic/line inputs
2 analog 1/4" TRS balanced outputs
Zero latency monitoring
Low latency ASIO drivers
Streamlined monitor form factor puts all recording controls at your fingertips
Separate level meters and gain control per channel
1 side panel 1/4" instrument input
1 side panel headphone output with dedicated volume adjustment
MIDI in and out

Technical Specifications

Microphone Inputs:    Female XLR Pin 2 Hot
Input Impedance:    3kΩ balanced
Phantom Power:    +48 Volts
Maximum gain:    +58 dB
E.I.N. (at max gain):    -125 dBu @ 58dB gain typical (150Ω source) -129 dBu @ 58dB gain typical A-weighted (150Ω source)
Maximum Input Level:    +21 dBu at minimum gain
Frequency Response:    +0/-1 dB, 20Hz - 20kHz
THD+N:    +18 dBu maximum
Impedance:    32Ω Balanced, 16Ω Unbalanced
Headphone Output:    1/4" stereo jack 350mW per channel at 50Ω
MIDI Interface:    5 pin DIN connectors for MIDI in and MIDI out (5 volt signal)
Sample Rate:    44.1, 48, 88.2, or 96 kHz (determined by computer application)
Dynamic Range:    A/D (24 Bit) 108 dB typical, A-weighted, 20Hz - 20kHz
(44.1 kHz sample rate)
D/A (24 Bit) 110 dB typical, A-weighted, 20Hz - 20kHz
A/D/A (24 Bit) 102 dB typical, A-weighted, 20Hz - 20kHz
Power Requirements:    12W 9VAC
Power adaptors available for:
US and Canada: 120 VAC, 60 Hz Adapter: PS0913B - 120
Japan: 100 VAC, 50/60 Hz Adapter: PS0913B - 100
Europe: 230 VAC, 50 Hz Adapter: PS0913B - 230
UK: 240 VAC, 50 Hz Adapter: PS0913B - 240
Australia: 240 VAC, 50 Hz Adapter: PS0913B - 240-AU

Yamaha GO46 FireWire Interface

The GO46 FireWire interface from Yamaha provides a means to stream
high-quality 24-bit/192kHz digital audio and MIDI into a computer. Connect
it to a laptop, and you've got a rugged and portable interface that can go
anywhere you go, hence the name "GO46." This box is the ideal interface
for great-sounding audio on the "GO."

Yamaha GO46 FireWire Audio/MIDI Interface At a Glance
Premium Mic Pres and Inputs
FireWire Connectivity
Flexible Connectivity Including S/PDIF, Insert Points, and MIDI

Premium Mic Pres and Inputs
The GO46 features combo mic/line terminals (for both XLR and phone jack)
 on the front panel. Phantom power is also available and independently
switchable for each input channel. In other words, you can use a condenser
microphone on channel 1 with phantom power switched on to capture the
delicate sounds of a vocal while simultaneously recording an electric/acoustic
guitar plugged into channel 2. These combo inputs are captured at up to 24-bit/
192kHz resolution. This pro-level quality makes the GO46 perfect for any type
of recording, and allows you to capture the full details and nuances of the
original source - from the breathiness of a vocal to the delicate finger slides of
an acoustic guitar performance.

FireWire Connectivity
The FireWire equipped GO46 not only offers the convenience of one plug
connection to a computer, but the GO46 can be powered via bus power
from the FireWire port. Connect the GO46 to the FireWire terminal of a
laptop and you've got and extremely powerful and portable recording studio
that will fit in a backpack. This is also great for using the GO46 in places
where electrical outlets can be scarce, like local clubs.

Flexible Connectivity Including S/PDIF, Insert Points, and MIDI
In order to maximize the flexibility of the GO46, Yamaha included virtually
any kind of connection you might need on location recording gigs. Two
insert points allow for connection to outboard gear like compressors or EQs.
MIDI in/out allows for connection of MIDI sound modules or instruments.
S/PDIF jacks are great for inputting digital signal from another interface or
throughputting the GO46 signal to a digital mixer, separate digital recorder,
or any other digital device.

Yamaha GO46 Features:
FireWire (IEEE1394)
Durable aluminum die cast body
2 x Premium Quality Mic pre amps with XLR/Combo connectors
Phantom Power ( +48V ) switch for each connector
2 x Insert connectors for analog inputs
1 MIDI In/ 1 MIDI Out
S/P DIF In/Out up to 24 bit/96 kHz
24 Bit/192 kHz compatible
Included Cubase LE, HALion SE, and Groove Agent SE

UA-20: Audio Capture USB Audio/MIDI Interface Features

The UA-20 is the standard model to Edirol's rapidly expanding UA series of USB Audio Capture devices. The unit can accept input from Mic, Line and even guitar level signals. The audio is converted at 24-bit quality and is transferred to your computer via industry standard low latency WDM, ASIO, MME drivers for compatibility with all major sequencing platforms, the input signal may be also monitored directly in hardware. Outputs include analogue, digital and headphone. The built-in MIDI in and out utilize Edirol's Fast Processing Technology for super accurate MIDI timing with any sequencing software on Mac or PC platforms and can be used with both OMS or FreeMIDI drivers on the Apple Macintosh. The UA-20 requires no external power supply and is ideal for use by mobile laptop or Powerbook users. The unit ships with drivers for Windows XP, 2000, Me, 98, MacOS X, and Mac OS 9.x, 8.5 and may also be used with the native USB audio drivers that are included with both Mac & PC.

  • Audio and MIDI in a compact unit.
  • Fully equipped with I/O jacks.
  • Great tool for creating music.
  • Edirol's FPT Technology.

Record1 pair of stereoPlayback1 pair of stereoSignal ProcessingPC interface24 bitSampling RateDigital output44.1 kHzNominal Input Level-45 – -10 dBuInput ImpedanceLINE22 k ohmsGUITAR470 k ohmsMIC22 k ohmsNominal Output Level-10 dBuOutput Impedance1 k ohmsResidual Noise LevelMaster Out-105 dBu or less
(input terminated with 1 k ohm, Master Volume = max.,
Input Monitor = off, IHF-A, typ.)InterfaceUSB
Digital output (Optical Type , conforms to S/P DIF)ConnectorsInput Jack (1/4 inch phone type) x 2
Digital Out Connector (Optical type)
Headphones Jack (Stereo miniature phone type)
Master Out Jack (RCA phono type)
MIDI ConnectorsOthersPower SupplySupplied from the computerCurrent Draw170 mAAccessoriesOwnerʼs Manual
USB cable
CD-ROMSize and WeightWidth149 mm5-7/8 inchesDepth111 mm4-3/8 inchesHeight43 mm1-11/16 inchesWeight0.2 kg0 lbs. 8 oz.

The Yamaha GO44 is a mobile audio solution that features high quality line
inputs/outputs and worldclass MIDI and audio recording software enabling
professional quality recording to a computer in a very compact package that
can be carried and used virtually anyway.
The Yamaha GO44 boasts up to 24-bit/192kHz resolution on the analog inputs/
outputs - the best in its class - and 24-bit/96kHz on the digital I/O. This pro-level
quality makes the Yamaha GO44 perfect for any type of recording, and allows
you to capture the full details and nuances of the original source - from the
breathiness of a vocal to the delicate finger slides of an acoustic guitar performance.

The Yamaha GO44 features 4-in/4-out multi-channel audio, with two analog phone
jack terminals for both input and output, and special S/P DIF coaxial terminals for
two-channel digital in/out. This device is simple and easy to use, yet provides high-quality
recording capability - perfect not only for those who want to create music, but also
for those who want an audio playback system for their computer that delivers
outstanding sound quality.

The digital outputs on the Yamaha GO44 are compatible with the AC-3 and DTS
surround sound formats. Simply connect a surround compatible amplifier/speaker
setup, and enjoy the powerful sonic experience of surround sound.

Yamaha GO44 Features:
FireWire audio interface
Durable aluminum die cast body
Simple, small and light weight
2 x Balanced Line inputs / outputs
Headphones output on Front Panel
1 MIDI In /1 MIDI Out
S/P DIF In/Out up to 24 bit/96 kHz
24 Bit/192 kHz compatible

GUITAR LINK UCG102 The Ultimate Guitar-to-USB Interface to Jam and Record with Killer Modeling Amps and Effects
  • Plug in your favorite guitar and turn your PC or Mac computer into a guitar amp and recording system without the need for any other hardware
  • Enjoy immediate access to Guitar Combos from Native Instruments—the leading authentic guitar amp and stomp box modeling software—now including VST, AU and RTAS plugin versions
  • Create Music Now! Incredibly powerful energyXT2 Compact music production software and Audacity editing software—both with full portability on all PC, Mac or Linux computers
  • Directly works with your PC or Mac computer—ultra-low latency ASIO driver for PC audio optimization included
  • Stereo Headphone output lets you jam with your computer and can also be used for monitoring with active monitor speakers
  • Guitar Combos with variable-speed file playback function for MP3, WAV, AIFF audio files—perfect for easy learning and practicing—tuner and metronome function
  • Powered via USB—no additional power supply required
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
  The UCG102 is a USB interface that, like a guitar amp, receives signal from your guitar via a 1/4" input jack. A built-in USB cable then sends signal directly to your computer, where the amazing included software package simulates guitar amps and stomp boxes, in addition to tracking your latest masterpiece. It has a 1/4" headphone jack and PHONES volume dial so you can monitor your performance as you record, a CLIP LED to tell you when your signal is too hot, and a HI/LO level selector. Super Software The UCG102 comes packaged with Native Instruments' "Guitar Combos" software that models guitar amps and stomp boxes. Take your pick of the "PLEXI COMBO“, "TWANG COMBO” or "AC BOX COMBO” for stunningly real amplifier tones. Sample them all, then activate the full version of the classic rockin' "AC BOX COMBO" rig. Native Instruments extends special offers to all registered Guitar Combos users, making it more affordable than ever to take advantage of their award-winning GUITAR RIG software packages. Visit http://co.native-instruments.com/index.php?id=4101&prid=247&redirected=1 for the latest special pricing on this incredible software. You also get energyXT2.5 BEHRINGER Edition, a multi-track recording program. This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, turning song ideas into stunning CD or web-ready recordings. energyXT includes its own multi-FX processor, built-in synthesizers and a drum machine, both of which can be accessed directly via an external controller (such as our UMA25S or UMX25) or programmed in step-write mode. To learn more about energyXT Compact BEHRINGER Edition, visit http://www.behringer.com/EN/Support/energyXT.aspx.
Weight1.00 kg2.00 kg1.50 kg0.60 kg1.50 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 2.00 kg
Weight 1.50 kg
Weight 0.60 kg
Weight 1.50 kg
Weight 0.50 kg

Recently Viewed Products