| Content | iTrack Dock Studio Pack contains everything you need to plug your instruments straight in and easily record with legendary Focusrite sound on any lightning-compatible iPad Sleek iPad audio interface with two award-winning microphone preamps Large diaphragm CM25 condenser microphone Professional closed-back HP60 headphones High quality three metre XLR cable Class compliant USB cable
Features
- Made for iPad: iTrack Dock is an Apple-compliant audio docking interface with Apple-certified "Made for iPad" status. Compliant with any Lightning iPad - iPad 4th Generation, iPad Air, iPad mini and iPad mini with retina display - iTrack Dock's sleek, modular design allows you to slide the Lightning connector up and down to accommodate any sized iPad.
- Record and monitor at superior resolution: iTrack Dock is the best sounding iPad-based workstation, featuring premium Focusrite A-D/D-A conversion with over 105dB dynamic range and the ability to record at up to 24-bit, 96kHz sample rates.
- Legendary Focusrite mic preamps: Two Focusrite mic pres, as featured in the Scarlett range of USB audio interfaces, include 48V Phantom power for use with condenser microphones. iTrack Dock also features Focusrite's unique "gain halos" - a ring of light around the input gain control - to easily set the input gain: green for healthy signal, red if it's too hot.
- Plug your guitar into your favourite apps: iTrack Dock provides a guitar input with plenty of clean, clear headroom to capture both quiet and loud guitars with stunning clarity.
- Connect and power a MIDI controller: USB MIDI port for class compliant MIDI controller connectivity (MIDI + power) - perfect for connecting a controller like the Novation Launchkey or Launchkey Mini.
- Works with all Core Audio apps on iPad: From GarageBand to Cubasis, Auria and beyond, expand the functionality of your apps with the iTrack Dock and its plug-and-play Core Audio driver - no setup required.
- High quality outputs with over 105dB dynamic range: Main monitor outputs on balanced 1/4 inch TRS connectors and large-diameter level control knob, plus stereo headphone output with its own level controls - delivering more than enough power for your headphones and powered monitor speakers.
- Direct monitoring: Avoid monitoring latency delays with the iTrack Dock's direct monitoring feature, sending your input signal straight to the headphone and main monitor outputs.
- Stereo line inputs: Connect a variety of other stereo sound devices with the balanced line inputs, including digital pianos, synths, drum machines and CD players.
- Recording app included: Includes Tape by Focusrite app for iPad, which offers instant recording, mastering and sharing without the complexities of traditional music-making software.
iTrack Dock is a comprehensive yet easy-to-use, studio-quality iPad recording interface that acts as the hub of your Lightning iPad recording studio. Featuring two legendary Focusrite microphone preamps, along with two line inputs and an instrument DI with plenty of extra headroom, stereo monitor outputs with 105dB dynamic range plus independently-controlled headphone outputs, and a USB port for class compliant MIDI instruments and controllers, iTrack Dock gives you everything you need to record, monitor and control music on your iPad (not included) - with precision Focusrite digital conversion at up to 24-bit, 96kHz sampling. And at the same time it charges and powers your iPad.
With two Focusrite preamps, main and monitor outputs with 105dB dynamic range, and all controls on the easily-accessed, angled front panel next to the iPad, iTrack Dock brings powerful, professional audio to any Core Audio app including GarageBand, Auria, Cubasis and Focusrite's Tape app, which is included in the box.
Compatible with any Lightning-equipped iPad and instrument, microphone, class-compliant MIDI controller or audio device, iTrack Dock allows you to capture music in pristine 24-bit 96kHz resolution. iTrack Dock powers and charges the iPad, and powers a USB MIDI device - such as a Novation Launchkey or Launchkey Mini keyboard controller - all at the same time. Plug and power a class-compliant USB MIDI controller directly into iTrack Dock - there's no need for USB hubs or camera connection kits.
iTrack Dock features easy-to-reach, dedicated monitor and headphone controls. Input level controls incorporate Focusrite's unique "Gain Halos", for accurate instrument and microphone level monitoring. Latency-free direct monitoring is also provided.
iTrack Dock is an Apple-compliant audio docking interface with Apple-certified "Made for iPad" status. Compliant with any Lightning iPad - iPad 4th Generation, iPad Air, iPad mini and iPad mini with retina display - iTrack Dock's sleek, modular design allows you to slide the Lightning connector up and down to accommodate any sized iPad. |
Mbox® is a premium audio interface, packing a wide range of analog and digital I/O connections into a mobile form factor.
* Compatible with most major audio software (Pro Tools LE®, Logic, Live, Cubase, and more)
* Bus-powered USB 2.0 connection for maximum mobility
* Professional-grade circuitry and converters deliver exceptional audio performance
* Up to 24-bit, 96 kHz sample rates
* Soft-clip limiter lets you track hot signals without clipping—providing a classic overdriven tape saturation sound
* Built-in guitar tuner
* Onboard DSP offers flexible cue mixing and reverb effects
* Assignable Pro Tools multi-function button on interface gives you fast access to software functions
* Hardware configuration:
o 4 x 4 simultaneous channels of I/O
o 2 XLR mic/line combo inputs with 48 V phantom power
o 2 1/4” DI inputs on front panel for easy access
o 2 balanced 1/4” monitor outputs
o 1 1/4” stereo headphone output with volume control
o Stereo S/PDIF digital I/O
o 1 MIDI input, 1 MIDI output
o Monitor control section with Mono and Dim controls
o Dedicated monitor volume knob
Pro Tools LE Software
Pro Tools 8 Software
The Pro Tools® software platform is used in professional studios around the world, and includes all the tools you need to easily compose, record, edit, mix, and master your projects with pro results—every time.
Key Features
* Award-winning Pro Tools recording, editing, and mixing
* 48 simultaneous stereo audio tracks (expandable with Toolkit options)
* Includes over 70 professional effects and virtual instruments
* Professional MIDI sequencing with dedicated MIDI Editor window
* Integrated Score Editor based on award-winning Sibelius notation software
* Full Elastic Time and Elastic Pitch to easily adjust timing and pitch on your tracks
* Unique Beat Detective LE automatic groove analysis and correction tool
* ReWire support for streaming your favorite applications right into Pro Tools
* Huge selection of compatible third-party plug-ins and software options
* Works on Windows and Mac computers
System Requirements
Mac PC
* Mac OS X 10.5.8 (Leopard) or 10.6.1-10.6.4 (Snow Leopard)
* 1 GB RAM (2 GB recommended)
* 6 GB free disk space
* Intel® processor (no PowerPC® support)
* One USB port
* Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit, or Windows 7 64-bit
* 1 GB RAM (2 GB recommended)
* 5 GB free disk space
* One USB port
Compatibility
ASIO, Core Audio, WDM, MME, and multi-client drivers ![]( "MBOX")
|
The 828mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.
The 828mk3 provides ten channels of pristine 192 kHz analog recording and playback, combined with sixteen channels of ADAT digital I/O and stereo S/PDIF. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.
The 828mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 828mk3 provides 28 separate inputs and 30 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.
Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer – with no latency and no processor strain on your computer. Apply hardware DSP-driven compression, EQ and reverb to every input and output, independent of your host computer. When recording from the mic/guitar inputs, the 828mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no digital clipping or harsh artifacts.
MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.
After programming the on-board mixing in the studio, unplug the 828mk3 from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.
The 828mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.
|
Features:
USB 2.0 Desktop Recording Studio
44.1kHz to 96kHz sample rates, 24-bit resolution
Pantheon II VST/AU reverb plug-in with 6 legendary Lexicon reverbs
dbx® 60V high-voltage, ultra-low noise microphone preamps
Superior sonic performance
2 analog combi-jacks for mic/line inputs
2 analog 1/4" TRS balanced outputs
Zero latency monitoring
Low latency ASIO drivers
Streamlined monitor form factor puts all recording controls at your fingertips
Separate level meters and gain control per channel
1 side panel 1/4" instrument input
1 side panel headphone output with dedicated volume adjustment
MIDI in and out
Technical Specifications
Microphone Inputs: Female XLR Pin 2 Hot
Input Impedance: 3kΩ balanced
Phantom Power: +48 Volts
Maximum gain: +58 dB
E.I.N. (at max gain): -125 dBu @ 58dB gain typical (150Ω source) -129 dBu @ 58dB gain typical A-weighted (150Ω source)
Maximum Input Level: +21 dBu at minimum gain
Frequency Response: +0/-1 dB, 20Hz - 20kHz
THD+N: +18 dBu maximum
Impedance: 32Ω Balanced, 16Ω Unbalanced
Headphone Output: 1/4" stereo jack 350mW per channel at 50Ω
MIDI Interface: 5 pin DIN connectors for MIDI in and MIDI out (5 volt signal)
Sample Rate: 44.1, 48, 88.2, or 96 kHz (determined by computer application)
Dynamic Range: A/D (24 Bit) 108 dB typical, A-weighted, 20Hz - 20kHz
(44.1 kHz sample rate)
D/A (24 Bit) 110 dB typical, A-weighted, 20Hz - 20kHz
A/D/A (24 Bit) 102 dB typical, A-weighted, 20Hz - 20kHz
Power Requirements: 12W 9VAC
Power adaptors available for:
US and Canada: 120 VAC, 60 Hz Adapter: PS0913B - 120
Japan: 100 VAC, 50/60 Hz Adapter: PS0913B - 100
Europe: 230 VAC, 50 Hz Adapter: PS0913B - 230
UK: 240 VAC, 50 Hz Adapter: PS0913B - 240
Australia: 240 VAC, 50 Hz Adapter: PS0913B - 240-AU
| Portable 10-in/10-out compact, mobile FireWire audio at home or on the road
The FA-101 has the highest specs available to support your most demanding applications. You get 24-bit, 192kHz simultaneous recording and playback in a compact 1U half-rack unit, with all the headroom you need.
Supports up to 24 bit, 192 kHz
Compatible with Mac OS X standard driver
Two independent, on board mic pre-amps
Capable of full duplex recording and playback on 10 independent channels
Bus powered and durable metal construction for mobile applications
Lots of ins and outs to support a wide range of recording and gigging applications
The FA-101 is a feature-packed 10x10 audio interface that can handle a full 10 channels of input/output at 24-bit/96kHz. Record and monitor all 10 channels simultaneously in full duplex. Phenomenal audio power for the studio musician! In addition, the FA-101 offers 6-channel recording and playback at 24-bit/192kHz for performance at DVD-A quality.
* 10x10 24-bit/96kHz audio performance
* 6x6 24-bit/192kHz audio performance
* Firewire bus-powered
* Direct monitoring
* Low-latency driver support
* Native Support in Mac OS X (10.3.4 or later)
* 2x phantom-powered mic preamps
* 8x8 balanced analog I/O
* S/PDIF optical I/O
* MIDI I/O |
Behringer UFO202 USB Audio Interface
The Behringer U-Phono UFO202 is a high-quality USB audio interface with built-in phono preamp and massive software package for digitalizing your tapes and vinyl records.
Features
- High-quality USB audio interface connects your turntable, cassette player, etc. with your computer for recording and playback
- Transfer and restore your valuable vinyl records and tapes to your computer via a simple USB connection
- Massive software bundle includes Audacity vinyl restoration, noise-reduction, editing and recording software, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins
- Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms
- Phono input switchable to line input source
- Stereo output allows easy connection and playback of computer audio files over your home sound system
- High-resolution 48 kHz converters for high-end audio quality
- Stereo Headphone output with dedicated Level control lets you monitor your input source
- Works with your PC or Mac computer -- no setup or drivers required
- Powered via USB--no external power supply needed
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
Compact and Versatile
Equipped with RCA inputs and outputs, the U-Phono UFO202 can connect to a myriad of equipment such as tape decks, sound modules and active monitors, plus many more. Additionally, when you connect the UF202's outputs to your mixer's input channels, you have the ability to access EQ, Aux Sends and much more - allowing you to create extremely versatile mixes for your recording sessions.
48kHz Precision
The Behringer UFO202 provides pristine 48kHz resolution to ensure that your favourite vinyl records are recorded with the detail and quality your music deserves.
Audacity Audio Editor Software
The Behringer U-Phono UFO202 USB Audio Interface comes supplied with a free open source audio editor and multi-track recorder software - Audacity. Please visit the Behringer web page for download links here.
Specifications
- Input Connector: RCA, Unbalanced
- Input Impedance: Approx. 27kΩ
- Maximum Input Level: 2dBV
- Output Connector: RCA, Unbalanced
- Output Impedance: Approx. 400Ω
- Maximum Output Level: 2dBV
- Digital Output: Toslink, Optical
- Digital Output Format: S/PDIF
- USB: Type A
- Converter: 16-Bit
- Sample Rate: 32kHz, 44.1kHz, 48kHz
- Frequency Response: 10Hz - 20kHz ±1dB @ 44.1kHz Sample Rate
- 10Hz - 22kHz ±1dB @ 48kHz Sample Rate
- Crosstalk: -77dB @ 0dBV, 1kHz
- Power Supply: USB, 5V 100mA Maximum
- Dimensions: 0.87" x 3.46" x 2.36" / 22mm x 88mm x 60mm (H x W x D)
- Weight: 0.10kg
|
Reviews
There are no reviews yet.