FOCUSRITE REDNET 4 INTERFACE WITH 8 MICROPHONE PREAMS/LINE INPUTS

Info

Focusrite RedNet 4, AD-Converter with 8x Focusrite Mic-Preamps and Line-/DI-Inputs, 8x XLR-In, 8x Line-In via DB25, 2x DI input, Dynamic Range: 120dB, Mic Input Level up to +16dBu, JetPLL jitter-reduction technology, up to 24-Bit/192 kHz, 48V Phantom Power, Dante Ethernet port.

Features:

USB 2.0 Desktop Recording Studio
44.1kHz to 96kHz sample rates, 24-bit resolution
Pantheon II VST/AU reverb plug-in with 6 legendary Lexicon reverbs
dbx® 60V high-voltage, ultra-low noise microphone preamps
Superior sonic performance
2 analog combi-jacks for mic/line inputs
2 analog 1/4" TRS balanced outputs
Zero latency monitoring
Low latency ASIO drivers
Streamlined monitor form factor puts all recording controls at your fingertips
Separate level meters and gain control per channel
1 side panel 1/4" instrument input
1 side panel headphone output with dedicated volume adjustment
MIDI in and out

Technical Specifications

Microphone Inputs:    Female XLR Pin 2 Hot
Input Impedance:    3kΩ balanced
Phantom Power:    +48 Volts
Maximum gain:    +58 dB
E.I.N. (at max gain):    -125 dBu @ 58dB gain typical (150Ω source) -129 dBu @ 58dB gain typical A-weighted (150Ω source)
Maximum Input Level:    +21 dBu at minimum gain
Frequency Response:    +0/-1 dB, 20Hz - 20kHz
THD+N:    +18 dBu maximum
Impedance:    32Ω Balanced, 16Ω Unbalanced
Headphone Output:    1/4" stereo jack 350mW per channel at 50Ω
MIDI Interface:    5 pin DIN connectors for MIDI in and MIDI out (5 volt signal)
Sample Rate:    44.1, 48, 88.2, or 96 kHz (determined by computer application)
Dynamic Range:    A/D (24 Bit) 108 dB typical, A-weighted, 20Hz - 20kHz
(44.1 kHz sample rate)
D/A (24 Bit) 110 dB typical, A-weighted, 20Hz - 20kHz
A/D/A (24 Bit) 102 dB typical, A-weighted, 20Hz - 20kHz
Power Requirements:    12W 9VAC
Power adaptors available for:
US and Canada: 120 VAC, 60 Hz Adapter: PS0913B - 120
Japan: 100 VAC, 50/60 Hz Adapter: PS0913B - 100
Europe: 230 VAC, 50 Hz Adapter: PS0913B - 230
UK: 240 VAC, 50 Hz Adapter: PS0913B - 240
Australia: 240 VAC, 50 Hz Adapter: PS0913B - 240-AU

System Requirements
Mac           PC

    * Mac OS X 10.5.8 (Leopard) or 10.6.1-10.6.4 (Snow Leopard)
    * 1 GB RAM (2 GB recommended)
    * 6 GB free disk space
    * Intel® processor (no PowerPC® support)
    * One FireWire port

         

    * Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit, or Windows 7 64-bit
    * 1 GB RAM (2 GB recommended)
    * 5 GB free disk space
    * One FireWire port

Compatibility

ASIO, Core Audio, WDM, MME, and multi-client drivers

Mbox Pro Hardware
Pro Tools Mbox Pro

Mbox® Pro is the ultimate high-definition recording interface, packing a wide range of analog and digital I/O connections into a desktop audio workstation.

    * Compatible with most major audio software (Pro Tools LE®, Logic, Live, Cubase, and more)
    * FireWire connection
    * Professional-grade circuitry and converters deliver exceptional audio performance
    * Up to 24-bit, 192 kHz sample rates*
    * Soft-clip limiter lets you track hot signals without clipping—providing a classic overdriven tape saturation sound
    * Built-in guitar tuner
    * Onboard DSP offers flexible cue mixing and reverb effects
    * Assignable Pro Tools multi-function button on interface gives you fast access to software functions
    * Connect up to three pairs of monitors or do 5.1 surround mixing**
    * Hardware configuration:
          o 8 x 8 simultaneous channels of I/O
          o 4 mic inputs with 48 V phantom power and high pass filter (2 XLR/DI combo, 2 XLR)
          o 4 1/4" TRS line inputs
          o 2 unbalanced Alt line inputs (2 RCA, 1 mini 1/8”)
          o 6 1/4" TRS balanced line outputs
          o 2 discrete 1/4” stereo headphone outputs with separate volume controls
          o Stereo S/PDIF digital I/O
          o 1 MIDI input, 1 MIDI output
          o Word clock I/O
          o Monitor control section with Mono, Mute, Dim, Alt Source, and Speaker A/B/C switching controls
          o Dedicated monitor volume knob

* Up to 96 kHz sample rates supported with Pro Tools LE software.

** Mixing 5.1 surround sound in Pro Tools LE requires Complete Production Toolkit
Pro Tools LE Software
Pro Tools 8 Software

The Pro Tools software platform is used in professional studios around the world, and includes all the tools you need to easily compose, record, edit, mix, and master your projects with pro results—every time.

Key Features

    * Award-winning Pro Tools recording, editing, and mixing
    * 48 simultaneous stereo audio tracks (expandable with Toolkit options)
    * Includes over 70 professional effects and virtual instruments
    * Professional MIDI sequencing with dedicated MIDI Editor window
    * Integrated Score Editor based on award-winning Sibelius notation software
    * Full Elastic Time and Elastic Pitch to easily adjust timing and pitch on your tracks
    * Unique Beat Detective LE automatic groove analysis and correction tool
    * ReWire support for streaming your favorite applications right into Pro Tools
    * Huge selection of compatible third-party plug-ins and software options
    * Works on Windows and Mac computers

The 828mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.

The 828mk3 provides ten channels of pristine 192 kHz analog recording and playback, combined with sixteen channels of ADAT digital I/O and stereo S/PDIF. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.

The 828mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 828mk3 provides 28 separate inputs and 30 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.

Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer – with no latency and no processor strain on your computer. Apply hardware DSP-driven compression, EQ and reverb to every input and output, independent of your host computer. When recording from the mic/guitar inputs, the 828mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no digital clipping or harsh artifacts.

MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.

After programming the on-board mixing in the studio, unplug the 828mk3 from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.

The 828mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.

• Plug in your favorite guitar and turn your PC or Mac computer into a guitar amp and recording system without the need for any other hardware
• Enjoy immediate access to Guitar Combos from Native Instruments—the leading authentic guitar amp and stomp box modeling software—now including VST, AU and RTAS plugin versions
• Create Music Now! Incredibly powerful energyXT2 Compact music production software and Audacity editing software—both with full portability on all PC, Mac or Linux computers
• Directly works with your PC or Mac computer—ultra-low latency ASIO driver for PC audio optimization included
• Stereo Headphone output lets you jam with your computer and can also be used for monitoring with active monitor speakers
• Guitar Combos with variable-speed file playback function for MP3, WAV, AIFF audio files—perfect for easy learning and practicing—tuner and metronome function
• Powered via USB—no additional power supply required
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

he U46XL is a powerful multi-purpose 4-in 6-out multi-channel audio interface designed for various recording applications at home or on the road. The U46XL is the successor of to ESI Audio's famous U46DJ interface.

As its predecessor, it provides 2 stereo line inputs, a microphone input with +48V phantom power and a headphone output. A main difference is the improved analog circuitry improving the audio quality as well as the professional microphone preamplifier with XLR input. This makes the U46XL the perfect solution to record signals from dynamic or condenser microphones on the road or in your studio.

The unit also features an instrument input (Hi-Z), typically to connect a guitar directly to it. Two totally separate stereo line input on the backside provide 4 simultaneously usable input channels at one time. There are also 6 independent individual outputs on the backside, perfect for multi-channel playback applications like to provide individual outputs for software synthesizers, to provide independent playback channels for DJ software or to provide surround playback capability via a 5.1 setup. A separate mix output with professional TRS outputs could be used to connect U46XL to professional stereo studio monitors.

A cool feature is the DirectWIRE support in the driver, allowing you to record signals from one application to another internally. U46XL works with this driver based on our EWDM technology under Windows XP and Windows Vista/7, however U46XL is also Mac OS X compatible.

U46XL ships with Cubase LE 4 from Steinberg for Mac and PC to start recording on a professional level right out of the box.