FOSTEX MC10ST ELECTREC CONDENSER STEREO PAIR

Original price was: €214.58.Current price is: €181.99. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: MC10ST Category:
8 Wide frequency response range High sensitivity, Low distortion High input withstand S.P.L. Rugged brass case, Light weight Shock mount adapters, stereo mounting bracket and wind screens as standard   PREMLIMINARY INFORMATION. The MC10ST is a stereo microphone set including a pair of cardioid electret condenser microphones, shock mount adapters, stereo mounting bracket and wind […]

 

Read more

8 Wide frequency response range
High sensitivity, Low distortion
High input withstand S.P.L.
Rugged brass case, Light weight
Shock mount adapters, stereo mounting bracket and wind screens as standard
 
PREMLIMINARY INFORMATION.
The MC10ST is a stereo microphone set including a pair of cardioid electret condenser microphones,
shock mount adapters, stereo mounting bracket and wind screens. The MC10ST can be used in a
wide range of applications, from studio and home recording to field or location sound aquisition.

Wide frequency response range
High sensitivity
Low distortion
High input withstand S.P.L.
Rugged brass case
Light weight
Shock mount adapters, stereo mounting bracket and wind screens as standard
Dedicated carry case as standard
 
SPECIFICATIONS:
Type: Back Electret Condenser Microphone
Polar Pattern: Cardioid
Frequency Response: 40Hz to 20kHz +/-10dB
Sensitivity: -40dBV/pa (10mv/pa)
Rated Impedance: 200ohm
Equivalent Noise Level: 22dB (A weighted IEC/DIN 651)
Maximum SPL: 134dB (THD

Weight 1.12 kg

Reviews

There are no reviews yet.

Be the first to review “FOSTEX MC10ST ELECTREC CONDENSER STEREO PAIR”

Your email address will not be published. Required fields are marked *

Quick Comparison

FOSTEX MC10ST ELECTREC CONDENSER STEREO PAIR removeAKG CK 31 Cardioid Condenser Microphone capsule (modular) removeSENNHEISER MKH-50 P48 super-cardioid mic removeAKG C 430 - Cardioid Condenser Microphone removeSENNHEISER ME-67 Capsule elecret super shotgun removeRODE NT-3 MULTI POWERED 3-4 remove
NameFOSTEX MC10ST ELECTREC CONDENSER STEREO PAIR removeAKG CK 31 Cardioid Condenser Microphone capsule (modular) removeSENNHEISER MKH-50 P48 super-cardioid mic removeAKG C 430 - Cardioid Condenser Microphone removeSENNHEISER ME-67 Capsule elecret super shotgun removeRODE NT-3 MULTI POWERED 3-4 remove
Imageck 31 akg microphoneAKG C 430 condenser microphone
SKUMC10STCK 31H11SE00007C 430H10SE00022H11RD00004
Rating
Price Original price was: €214.58.Current price is: €181.99. incl. GR VAT Original price was: €95.48.Current price is: €76.87. incl. GR VAT Original price was: €1,863.00.Current price is: €1,639.00. incl. GR VAT Original price was: €186.00.Current price is: €156.00. incl. GR VAT Original price was: €288.00.Current price is: €265.00. incl. GR VAT Original price was: €269.00.Current price is: €250.00. incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

8 Wide frequency response range
High sensitivity, Low distortion
High input withstand S.P.L.
Rugged brass case, Light weight
Shock mount adapters, stereo mounting bracket and wind screens as standard
 
PREMLIMINARY INFORMATION.
The MC10ST is a stereo microphone set including a pair of cardioid electret condenser microphones,
shock mount adapters, stereo mounting bracket and wind screens. The MC10ST can be used in a
wide range of applications, from studio and home recording to field or location sound aquisition.

Wide frequency response range
High sensitivity
Low distortion
High input withstand S.P.L.
Rugged brass case
Light weight
Shock mount adapters, stereo mounting bracket and wind screens as standard
Dedicated carry case as standard
 
SPECIFICATIONS:
Type: Back Electret Condenser Microphone
Polar Pattern: Cardioid
Frequency Response: 40Hz to 20kHz +/-10dB
Sensitivity: -40dBV/pa (10mv/pa)
Rated Impedance: 200ohm
Equivalent Noise Level: 22dB (A weighted IEC/DIN 651)
Maximum SPL: 134dB (THD

Technical specifications
Polar pattern cardioid
Frequency range 50 to 20,000 Hz
Sensitivity 20 mV/Pa (?34 dBV)
Max. SPL 125 dB (k=1 %)
Equivalent noise level 21 dB-A
Signal/noise ratio (A-weighted) 73 dB
Impedance 600 ohms
Recommended load impedance >2000 ohms
Supply voltage 9 to 52 V phantom power, requires DPA adapter (supplied with most Installation Modules)
Current consumption  
Connector Discreet Acoustics Modular standard
Finish matte dark gray
Dimensions 13.5 x 20 mm dia. (0.5 dia. x 0.8 in.)
Net weight 5 g (0.17 oz.)
Shipping weight 88 g (3.1 oz.)
Accessories (included) W 30
The super-cardioid MKH 50 offers a higher attenuation of diffusefield and lateral sound than the cardioid microphone. It is principally designed for use as a soloist’s or spot microphone for applications requiring a high degree of side-borne sound muting and feedback rejection. The directional characteristics are frequency-independent.
Features
High rejection of lateral sounds
Exceptionally low inherent self-noise
Transformerless and fully floating balanced output
Symmetrical transducer technology ensures extremely low distortion
Switchable roll-off filter to compensate for proximity effects at a distance of approx. 0.5 m
Switchable pre-attenuation
Black, anodised light metal body
Specifically designed for cymbal and overhead miking, the frequency response of the C 430 ensures a unique crisp sound. With its extremely compact external dimensions, this microphone will keep a low profile on the drum kit without compromising audio quality. Response is 20-20kHz, with 126dB max SPL, and requires phantom power. Specifications Polar Pattern: cardioid Frequency Response: 20?20.000 Hz Sensitivity: 7 mV/Pa=-43 dBV to 1 V/Pa Max. SPL for 1% / 3% THD: 126/130 dB SPL Equivalent Noise Level: 33 dB to DIN 45 412 Electrical Impedance: 200 ohms Recommended Load Impedance: >2.000 ohms Power Requirement: 9 to 52 volts universal phantom power Current Consumption: approx. 2 mA Connector : 3-pin XLR Cable Length: 1.5 m (5 ft.) Finish: matte black Size : dia.: 19 mm (0.7 in.), length: 79 mm (3.1 in.) Net / Shipping Weight: 23/192 g (0.8/6,8 oz.) Optional Accessorires: B15, B18

The ME 67 is a long gun microphone head designed for use with the K6 and K6P powering modules. A highly directional microphone, it can be used where the microphone must be placed at a distance from the sound source. Matt black, anodised, scratch-resistant finish.

Pick-up pattern : lobar
Sensitivity in free field, no load (1kHz) : 50 mV/Pa +- 2,5 dB
Nominal impedance : 200 Ohm (K6)
Min. terminating impedance : 1000 Ohm (K6)
Equivalent noise level : 10 dB
Dimensions : d 22,5 x 343 mm
Weight : 100 g

NT3 - Versatile & Dependable Stylish and modern, the NT3 is a studio and location workhorse. With both 48V phantom and internal 9V battery operation, this R?DE is at home anywhere. Intended for studio, stage and location work, this versatile handheld or stand mounted microphone incorporates a true externally polarized condenser (hyper- cardioid polar response) transducer with an internal capsule shock mounting system, and an ultra-low noise electronic circuit that has a high immunity to R.F. interference. Incorporating a rugged welded and heat-treated mesh head and all metal body. The NT3 is supplied in a zip pouch with a windshield, stand mount and thread adaptor. SPECIFICATIONS: Acoustic principle: Externally polarised 19mm (3/4“) condenser Directional pattern:  Hypercardioid Frequency range:  20Hz-20 kHz Output impedance:  200? Signal noise ratio din iec 651:  > 77dB (per IEC268-15) Equvalent noise:  123dB (per IEC268-15) Power supply voltage: P48, P24, P12 phantom 9V battery Weight without battery:  371g Weight with battery:  680g
Weight1.12 kg0.30 kg0.10 kg0.19 kg0.10 kg2.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.12 kg
Weight 0.30 kg
Weight 0.10 kg
Weight 0.19 kg
Weight 0.10 kg
Weight 2.00 kg

Recently Viewed Products