FUTURELIGHT EX-8-32 CONTROLLER LIGHTING CONSOLE-NEW-

Programmable DMX-controller

    * For all DMX-projectors with up to 8 control-channels
    * 8 different addresses can individually be controlled
    * Further devices can be connected with the same address and will run synchronically
    * The number of devices connected with each address is unlimited
    * 32 freely programmable chasers with up to 16 steps
    * Pan/Tilt-encoder for manual mirror movement
    * Fixture selection via fixture keys
    * Program-Run for running all programs
    * Program-Run also possible via random-function
    * Strobe-button for strobe-function
    * Segment-display and control-LEDs
    * Sound-control via ?" mono jack-socket or built-in microphone
    * Blackout
    * 64 control-channels
    * For 19“-rack mounting

FEATURES:
Power supply: 230 V AC, 50 Hz ~
                 via 12 V DC, 500 mA power unit included in the delivery
Power consumption: 6 W
Number of control-channels: 64
Sound-control: via Line In RCA-socket (min. 100 mV)
DMX 512-output: 3-pin XLR-connector
Dimensions (LxWxH): 483 x 132 x 90 mm
                     19" mounting dimensions with 3 u
Weight: 2 kg

High specification control for mixed lighting systems

The Bull Frog is the largest of the Frog family of control desks. The Bull Frog offers features including
attribute palettes, group selection and a monitor output. As a Zero 88 product, the Bull Frog desk
naturally retains the same ease of use, reliability and affordability as the rest of the Frog Family.
The BullFrog can control up to 96 generic channels, which may be manually or automatically patched
to any of the 1024 DMX channels, there is also capability for control of up to 24 intelligent fixtures. The
desk is fitted with a floppy drive for loading and saving show data, a remote ?Go? port and a monitor port.
Memories can be recorded as scenes or chases, each having its own fade times and modifiers. Memories
may be played back with the crossfade master and the ?Go? button for sequential, pre-programmed shows.
Extra flexibility is afforded through the 480 submasters allowing for the creation of lighting effects for the
more spontaneous shows.
The Bull Frog also offers the user four palette types: group, colour, beam and position. There are 48 palettes
available for each type. Palettes can be used to build memories or submasters. The desk palettes can be
used to aid fast and accurate programming of memories, submasters and chases. Palettes can also be used
during the running of the show to make instant and spontaneous changes to the programmed memories.
Changing the contents of a Palette will automatically and instantly update all associated memories and
submasters.Using a simple selection method, the BullFrog allows the user to record memories that include
all fixtures in each memory or user selected fixtures only.
Don?t be fooled by its simplicity and ease of use; the BullFrog offers a host of powerful features, making it a
formidable tool for creating shows. Its versatility makes it ideal for all entertainment lighting applications
allowing even relatively inexperienced operators to create exciting shows.
The movement effects engine allows for simple and rapid programming of commonly used effects, whilst the
inbuilt fixture library enables simple selection and manipulation of the moving lights. The unique ?F.R.O.G.?
(fixture random output generator) function can instantly generate unique lighting effects. These may be
outputted automatically or stepped through, with desired looks being recorded as required.

Features
    * 96 faders for dimmer control
    * 48 colour, position and beamshape palettes
    * 1024 control channels
    * Up to 24 Moving Lights
    * 48 fixture groups
    * 480 submaster playbacks (20 pages of 24)
    * Effects Generator
    * FROG Autochase function
    * 999 Memories
    * Softpatch
    * 'GO' button for memory playback
    * Fixture library with over 1200 moving lights
    * SMPTE/MIDI/CAN Upgrade kit available

The Xciter lighting controller closes the circle on total performance control. It provides complete functionality to your fingertips, with instant pitch adjustment, freeze, flash, blackout, master fader and more. From the most personal show to mid-sized performances, the Xciter puts you in total control.


    * 40 fixtures, with maximum of 48 channels + dimmers (Total max 512 channels)
    * Add Pan/Tilt shape effects with timing effects
    * Add any effect to a single channel including timing effects
    * Up to 10 manual override scenes during playback on faders
    * Pitch fader increases or decreases show speed by up to 5 times
    * Freeze button
    * Master fader to adjust general light intensity
    * 4 programmable custom buttons.
    * Assign different frequencies of the music as a trigger for any parameter of the fixture(s).
    * Export, backup or import shows via USB to PC.

Powerful theatre control for generic and moving lights, with a fast, easy to use interface.

For too long the creativity of lighting professionals has been stifled by the limitations and
excessive cost of high end lighting control. The Illusion has been designed to challenge
this status quo. Using leading edge technology, exceptional graphics and user definable
modes of operation, the Illusion performs as a fast, effective lighting tool.

The addition of moving light control software to the Illusion makes it an exceptionally powerful
controller with many features previously only found in more expensive consoles. The only limit
on the number of moving lights available is the 512 DMX channels available. Three high resolution
encoders allow for easy control of the moving light parameters.
To facilitate ease of programming the Illusion makes use of palettes or focus groups for each type
of LTP parameter. Building memories using palettes will ensure that changes to any palette are
tracked through to the associated memories.
Separate fade times can be set for parameters and for brightness channels allowing for exceptional
flexibility in replaying shows. To further facilitate programming the Illusion has a powerful effects
engine that allows for the creation of not only movement effects but also colour and beam effects.
The comprehensive library of fixtures available ensures that the user can program any moving light.
Fixture libraries are updated on a regular basis or it is possible to create your own unique fixture
personalities using a free software tool.
Programming moving lights is simple whether using the mouse and screen commands or using
command line syntax. With powerful editing tools the desk allows users to track changes to
memories forward and backwards or to change a single cue.

With 500 channels as standard, the Illusion features the phenomenally powerful Cueline system,
which gives instant and clear graphical representation of the cue list allowing easy visualisation,
operation and editing. The graphical user interface and memory stack are fully integrated.
Modifications in the memory stack automatically update the Cueline system and vice versa.
Using Cueline it is possible to create multipart cues that alter different parameters making the
playback of moving lights intuitive and simple.Clear front panel controls can be configured to suit
your preferred style of operation, with a choice of command line operation or full GUI. Powerful shortcuts,
associations and macros can be set up to aid the programming operation whilst flexible linking and
triggering operations make the replay of complex lighting sequences extremely simple.
Multi-part cues, linked submasters, follow-ons, audio effects, channel groups and full LTP channel
control can all be achieved without the need to search through endless menus or remember confusing
key sequences.

Features

    * 500 Control Channels
    * Up to 400 Memories
    * 108 Programmable Submasters
    * HTP & LTP Control
    * Go Button Playback
    * Two Manual Playbacks
    * Remote Triggering
    * Full Proportional DMX Patch to 512 Channels
    * Unique Cueline Interface
    * Multi-Mode Operation
    * Audio Effects
    * Palettes (Focus Groups)
    * Fixture libraries
    * Full Tracking
    * Parameter level programming
    * SMPTE, MIDI, DMX-IN and ChilliNet functionality available via optional kit

192 DMX channels for12 Fixtures of 16 channels each
30 Banks of 8 programmable scenes (total = 240 scenes)
6 Programmable chases of 240 scenes
8 Sliders for manual control of channels
Assignable joystick for ease of use
File Dump allows data to be sent or received between two units
Auto mode program controlled by speed and fade time sliders
Fade time/Assign fade time
DMX Polarity selector
Power failure memory